|
Tender for Dismantling Of Cement Concrete Pavements As Per Morth Specification Clause 202.Dismantling Of Cement Concrete Pavements By Mechanical Means Using Pneumatic Tools Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto A Lead Of 1000 M, Stacking Serviceable And Unserviceable Materials Separately Existing Damaged Flush Causeway , Excavation For Structures Earthwork In Excavation For Structures As Per Drawing And Morth Specifications Clause 304.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. Ordinary Rock (Not Requiring Blasting) Upto 3 M Depth , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 plain cement concrete Grade M 10 Nominal Mix 1:3:6 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 Reinforced Cement Concrete Grade M 20 , Supplying, Fitting And Placing Hysd Bar Reinforcement In Foundation Complete As Per Drawings And Morth Specifications Clauses 1009,1600 And 2102 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Morth Specification Clauses 1700 And 2200 For Height Upto 5 M Reinforced Cement Concrete Grade M 20 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Morth Specification Clauses 1700 And 2200 For Height Upto 5 M Reinforced Cement Concrete Grade M 25 , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawings And Morth Specification Clauses 1009,1600 & 2202 , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Morth Specification Clauses 1409, 2204.4, 2206.4 & 2706 , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Morth Specifications Clauses 1700, 2302 And 2304 Reinforced Cement Concrete Grade M 30 , Supplying, Fitting, And Placing Hysd Bar Reinforcement In Superstructure Complete As Per Drawing And Morth Specifications Clauses 1009,1600 And 2302 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Morth Specifications Clauses 1700 And 2704 Nominal Mix (1:2.5:5) , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Morth Specifications Clauses 1700 And 2704 , Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.30 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Providing And Laying Bituminous Concrete With 100-120 Tph Batch Type Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Minimum @ 5.2 & 5.4 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specifications Clause 507 Complete In All Respects For Grading-Ii(13 Mm Nominal Size) Bitumen (Vg-30) , Filler Jointproviding And Fillling Joint Sealing Compound As Per Drawings And Morth Specifications With Coarse Sand And 6 Per Cent Bitumen By Weight Clause 2604 , Providing And Fixing 20 Mm Thick Compressible Fibre Board In Expansion Joint Complete As Per Drawing And Morth Specifications Clause 2604 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Morth Specification Clause 2204.6 & 2504.2.2 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Morth Specification Clause 304.3.7 & 2204.6 Granular Material , Construction Of Reinforced Cement Concrete Railing Of M 25 Grade In Cast-In-Situ With 20 Mm Nominal Size Aggregate, True To Line And Grade, Tolerance Of Vertical Railing Post Not To Exceed 1 In 500, Centre-To-Centre Spacing Between Vertical Posts Not To Exceed 2000 Mm As Per Drawing And Morth Specifications Clauses 1700, 1500 And 2703.3 , Granular Sub-Base With Close Graded Material (Table:- 400-1) Plant Mix Method Providing Laying Spreading And Compacting Specified Graded Sand, Gravel (Crushed Stone) As Per Table 400-1,400-2 Or Any Other Course Material As Per Design Mix, As Per Cbr In Sub Base Course Including Premixing The Material At Omc In Wet Mix Plant, Carriage Of Mixed Material Spreading In Uniform Layers With Motor Grader F.E Loader On A Prepared Base And Compacting With Vibratory Roller To Achieve Desired Density (As Per I.S.2720) Including All Material, Labor, Machinery, Lighting Guarding, Barricading And Maintenance Of Diversion Complete.[Morth Specification : Clause 401]. By Mechanical Means. For Grading-Ii Material , Wet Mix Macadam Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mixer (Pug Mill), Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers In Sub-Base/Base Course On A Well Prepared Sub-Base And Compacting With Smooth Wheel Roller Of 80 To 100Kn Weight To Achieve The Desired Density Including Lighting, Barricading And Maintenance Of Diversion, Etc As Per Tables 400-12 & 400-13 And Morth Specification Clause 406. By Mechanical Means With All Lead , Providing And Applying Primer Coat With Bitumen Emulsion (Ss-1) On Prepared Surface Of Granular Base(Wbm/Wmm) Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.70-1.0 Kg/Sqm Using Mechanical Means As Per Morth Specification Clause 502 , Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Granular Surfaces Treated With Primer & Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Providing And Laying Bituminous Concrete With 100-120 Tph Batch Type Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Minimum @ 5.2 & 5.4 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specifications Clause 507 Complete In All Respects For Grading-Ii(13 Mm Nominal Size) Bitumen (Vg-30) , Providing And Erecting Typical Citizens Information Board As Per Approved Drawing & Specification Made Of Two Ms Sheet Of 1.6 Mm Thick Each Of Size 900Mm X 750Mm Stiffend By Angle Iron 25Mmx25mm X 3Mm All Around The Plate & Plates Fixed On Frame Of 75Mm Dia Pipe Of 12 Swg Sheet (Vertical Post 3050 Mm With Angle Holdfasts And Horizontal Member 900Mm) To Be Joined By Embedded In Cement Concrete M-15 Grade Of Block Of 600Mmx 600Mm X 750 Mm Size Below Ground Level As Per Enclosed Drawings & As Directed By Engineering Incharge. All Ms Will Be Stove Anmeled On Both Side Lettering. Figuring And Border Will Be With Ready Mixed Synthethic Enamel Paint Of Superior Quality In Required Shade And Colour Etc Complete In All Respect. All Sections Of Framed Post And Steel Tube Will Be Painted With Primer And Two Coat Of Epoxy Paint As Per Drawing And As Per Specification. , Excavation For Structures Earthwork In Excavation For Structures As Per Drawing And Morth Specifications Clause 304.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. Ordinary Rock (Not Requiring Blasting) Upto 3 M Depth , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 plain cement concrete Grade M 10 Nominal Mix 1:3:6 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 Reinforced Cement Concrete Grade M 20 , Supplying, Fitting And Placing Hysd Bar Reinforcement In Foundation Complete As Per Drawings And Morth Specifications Clauses 1009,1600 And 2102 , Providing And Laying Reinforced Cement Concrete Pipe Np3 As Per Design In Single Row Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2905.1000 Mm Dia , Dismantling Of Cement Concrete Pavements As Per Morth Specification Clause 202.Dismantling Of Cement Concrete Pavements By Mechanical Means Using Pneumatic Tools Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto A Lead Of 1000 M, Stacking Serviceable And Unserviceable Materials Separately , Providing Laying Spreading And Compacting Specified Graded Sand, Gravel (Crushed Stone) As Per Table 400-1,400-2 Or Any Other Course Material As Per Design Mix, As Per Cbr In Sub Base Course Including Premixing The Material At Omc In Wet Mix Plant, Carriage Of Mixed Material Spreading In Uniform Layers With Motor Grader F.E Loader On A Prepared Base And Compacting With Vibratory Roller To Achieve Desired Density (As Per I.S.2720) Including All Material, Labor, Machinery, Lighting Guarding, Barricading And Maintenance Of Diversion Complete.[Morth Specification : Clause 401]. By Mechanical Means.For Grading-Ii Material , Construction Of Dry Lean Cement Concrete Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg/ Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Batching Plant, Transported To Site, Laid With A Paver With Electronic Sensor, Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing. , Construction Of Un-Reinforced , Plain Cement Concrete Pavement M30 (Grade), Thickness As Per Design, Over A Prepared Sub Base, With 43/53 Grade Cement As Per Clause 602, Coarse And Fine Aggregates Conforming To Is:383, Maximum Size Of Coarse Aggregate Not Exceeding 31.5 Mm, Mixed In A In Fully Automatic Batching Plant And Transported To Site In Transit Mixer For Having Continuous Agitated Mixer, Manufactured As Per Approved Mix Design Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , With All Lead And Lift Including Cost Of Admixtures In Recommended Portion As Per Is 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer In Charge Laid With A Fixed Form Paver (Laying And Fixing Of 150 Micron Thick Polythene Film And Finished In Continuous Operation Including Provision Of construction And Expansion, Construction Joints, Applying Debonding Strips, Primer, Sealant Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14-Days Using Water Finishing To Lines And Grade As Per Drawing And Morth Specification Clause 602 Including Vaccum Dewatering Process With All Required Equipments (Dowel Bars Will Be Paid Seprately).
|
