|
Tender for Construction Of Libary Building At Lalapet Head Of Lalapet Panchayat , Earthwork Excavation For Foundation (For Narrow Excavation) To Full Depth As Per Designed In All Soils And Sub Soils Except Soft Disintegrated Rock Not Requiring Blasting And Hard Rock Requiring Blasting And Bailing Water Wherever Necessary. Refilling The Sides Of Foundation With Excavated Earth Other Than Sand In Layers Of Well Rammed And Compacted And Depositing The Surplus Earth In Places Shown By The Departmental Officers With An Initial Lead Of 10M And Initial Lift Of 2M And Clearing And Leveling The Site Etc. Complete Complying With Standard Specification. , Supplying And Filling In Foundations And Basement With Filling M- Sand In Layers Not Exceeding 15 Cm.Thick,Well Watered,Rammed And Consolidated Etc. Complete Complying With Standard Specifications. , Plain Cement Concrete 1 : 4 :8 ( One Part Of Cement, Four Parts Of Sand And Eight Parts Of Hard Broken Stone ) Using 40 Mm Gauge Hand Broken Hard Broken Granite Stone Jelly Complying With Standard Specifications In , Refilling The Approved Good Quality Earth In Plinths, Area Development Etc. Wherever Specified In Layers Is Not Exceeding 200 Mm Thick, With Available Earth At Site. , Supplying And Filling Of Good Earth Filling Locally Available Earth Transported From The Outside Including Consolidation, Leveling Specified In Layers Of Not Exceeding 200 Mm Thick., Etc. Complete. , Supplying And Erecting Centering And Shuttering For Soffits Including Necessary Supports And Strutting Up To 3 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At About 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specification.(Payment For Centering Shall Be Given After The Concrete Is Laid). , Supplying And Erecting Centering And Shuttering For Soffits Including Necessary Supports And Strutting Up To 3 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At About 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specification.(Payment For Centering Shall Be Given After The Concrete Is Laid). , Supplying And Erecting Centering And Shuttering For Soffits Including Necessary Supports And Strutting Up To 3 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At About 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specification.(Payment For Centering Shall Be Given After The Concrete Is Laid). , Supplying And Erecting Centering And Shuttering For Soffits Including Necessary Supports And Strutting Up To 3 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At About 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specification.(Payment For Centering Shall Be Given After The Concrete Is Laid). , Providing And Laying In Position, M-20 Grade In Accordance With Is:456-2000, Using 20Mm And Down Grade Hard Broken Granite Stone Jelly For All Reinforced Cement Concrete Items Of Works With Minimum Cement Content Of 350Kg/M3 And Maximum Water Cement Ratio Of 0.50, Including Admixture (Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is:9130 To Accelerate, Rated Setting Of Concrete, Improve Workability Without Impairing Strength And Durability With About (5.0 Cu.M) 7730Kg. Of 20Mm Machine Crushed Stone Jelly And With About (3.3Cum) 5156 Kg. Of 10-12Mm Machine Crused Stone Jelly And With About (4.79Cum) 7670 Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc.,And Providing Fixtures Like Fan Clamps In The Reinforced Cement Concrete Floor / Roof Slabs Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements Of Is Standards. (No Separate Payment Will Be Made By The Department For The Excess Usage Of Materials). , Providing And Laying In Position, M-20 Grade In Accordance With Is:456-2000, Using 20Mm And Down Grade Hard Broken Granite Stone Jelly For All Reinforced Cement Concrete Items Of Works With Minimum Cement Content Of 350Kg/M3 And Maximum Water Cement Ratio Of 0.50, Including Admixture (Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is:9130 To Accelerate, Rated Setting Of Concrete, Improve Workability Without Impairing Strength And Durability With About (5.0 Cu.M) 7730Kg. Of 20Mm Machine Crushed Stone Jelly And With About (3.3Cum) 5156 Kg. Of 10-12Mm Machine Crused Stone Jelly And With About (4.79Cum) 7670 Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc.,And Providing Fixtures Like Fan Clamps In The Reinforced Cement Concrete Floor / Roof Slabs Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements Of Is Standards. (No Separate Payment Will Be Made By The Department For The Excess Usage Of Materials). , Steel - Fe 500 D: Supply, Fabrication And Placing Of Reinforcement Steel Of High Yield Strength Ribbed Bars Of Various Diameters And Grade Conforming To Is 1786 For Reinforced Concrete Work. The Work Includes Recoiling, Straightening, Cutting, Bending, Fabricating, And Placing In Position, At All Levels Including Lead And Lift, According To Drawings, Specifications Etc. Complete And Supply & Use Of 18G Black Annealed Binding Wire Double Fold To Tie The Bars In Position And Providing Precast Cement/ Pvc Cover Blocks For Main Reinforcement To Ensure Specified Cover And Complete., Including All Labor Charges Etc As Directed By Departmental Officers. , Brick Work In Following Cement Mortar 1:5 Using Best Quality Ii Class Table Moulded Bricks 83/4 X 41/4 X23/4 For Foundation And Basement Including Curing Etc.,Complete Complying With Standard Specification.Including Scaffolding Curing Cost Of Reinforcement Etc.All Complete As Per Specifications And Drawings As Directed By The Engineer In-Charge. , Brick Work In Following Cement Mortar 1:5 Using Best Quality Ii Class Table Moulded Bricks 83/4 X 41/4 X23/4 For Foundation And Basement Including Curing Etc.,Complete Complying With Standard Specification.Including Scaffolding Curing Cost Of Reinforcement Etc.All Complete As Per Specifications And Drawings As Directed By The Engineer In-Charge. , Brick Partition Walls Of 11.50Cm Thickness Using Best Quality Ii Class Table Moulded Bricks 83/4 X 41/4 X23/4 In Cement Mortar 1:3 (One Cement And Three Sand) Using Hoop Iron Reinforcement If Found Necessary Including Curing Etc. Complete And As Directed By The Departmental Officers. , Supplying And Painting The Walls With Two Coats Of Wall Putty As Instructed By The Departmental Officers Including Preparation Of Surface Curing, Etc., Complete In All Floors Complying With Standard Specifications (The Wall Putty Shall Be Got Approved By The Executive Engineer Before Use Of Work). , Providing & Applying 12 Mm Thick Cement Plaster In Cm 1:5 (1 Part Of Cement: 5 Parts Of Sand) To Walls Internally In Single Coat At All Levels To Correct Line And Level Including Chicken Wire Mesh At All Joints Of Brick And Concrete Surfaces With Minimum Overlap Of 150 Mm In All Directions, Scaffolding, Rounding Off Or Chambering Of Corners, Offsets, Fin/ Bands, Projections, Etc. And Cleaning Of Surface, Raking Out Joints, Roughening Of Surface, Chiseling The Undulated Surface Wherever Necessary And Curing, Etc., All Materials And Labor Complete In All Respects Including All Lead, Lift And Descent And As Directed. , Providing & Applying 12 Mm Thick Cement Plaster In Cm 1:5 (1 Part Of Cement: 5 Parts Of Sand) To Walls Externally In Single Coat At All Levels To Correct Line And Level Including Scaffolding, Rounding Off Or Chambering Of Corners, Offsets, Fin/ Bands, Projections, Etc. And Cleaning Of Surface, Raking Out Joints, Roughening Of Surface, Chiseling The Undulated Surface Wherever Necessary And Curing, Etc., All Materials And Labor Complete In All Respects Including All Lead, Lift And Descent And As Directed. , Paving The Floor With Best Quality Vertified Tiles Of Size 600 X 600 X 8Mm Of Approved Colour, Shade And Quality Laid In Cement Mortar 1:3 (One Cement And Three Crushed Stone M.Sand) 20Mm Thick In All Floors And The Top Pointed With The White Cement Mixed Same Colour Pigments Etc., Complete Complying With Standard Specification. (The Make And Brand Of The Tiles Should Be Got Approved By Executive Engineer Before Use On Works) , Providing Granolithic Floor Finish Of The Following Thickness With Plain Cement Concrete 1:2:4 (One Cement, Two Sand And Four Aggregate) Using 10 To 12Mm Gauge Hard Broken Stone Jelly Including Laying, Finishing And The Top Rubbed Smooth With Power Trawl,(25 Mm Thick) , Providing, Fabricating And Fixing M.S. Grills Windows, And Ventilator, Gates, Ladders, Rail Pipes, Nosing Angles, With M.S.Lugs In Staircase Steps Etc., Made Out Of M.S Rods, Flats, Angles, Pipes, Channels Etc. Including Necessary Fixtures Complete As Per Drawings And Specifications And As Directed By The Engineer , Upvc Window.The Cost Includes Cost Of All Materials, Labour Charges And Other Incidental Charges, Etc., Complete , Manufacturing, Supplying And Fixing Of Steel Doors With Following Specification.Ms Angle Of Size 40X40x6mm At 3.5 Kg/M Used For Outer Frame And Ms Angle Of Size 35X35x5mm At 2.6 Kg/M For The Shutter Frame. Stiffeners With 32X6mm At 1.5 Kg/M Ms Flat Is Provided As The Lock Rail Of The Door And Welded Intact On Both Ends To The Shutter Frame.18 G Cr Sheets Of Best Quality Is Laid As Panel In The Shutter Frames. 18X5mm At 0.70 Kg/M Ms Flat Is Welded Over The 32X6mm At 1.50Kg/M Ms Flat On The Rear Side Of The Door, Sandwiching The Cr Sheet For Rigidity. Additional Stiffeners With 18X5mm At 0.7 Kg/M Ms Flats Are Provided Diagonally On The Rear Side Of The Shutter. 300Mm Length Of Hinges 2Nos, For Shutter Is Provided. 6 Nos. Of 250Mm Length Hold Fasts 200Mm Length Specified At The Ends Are Welded To The Outer Frame Of The Door. Tower Bolt 2 Nos. At The Top Provided. , Supplying And Painting New Ceiling Plastered Surface With Two Coats Of Distempering One Coat Of Distemper Primer , Supplying And Painting New Plastered Internal Wall Surface With Two Coats Of Distempering One Coat Of Distemper Primer , Supplying And Painting The Walls With One Coat Of Wall Primer And Two Coats Of Exterior Emulsion (Apex Or Equivalent) As Instructed By The Departmental Officers Including Preparation Of Surface Curing, Etc., Complete In All Floors Complying With Standard Specifications (The Colour And Shade Of The Cement Paint Shall Be Got Approved By The Executive Engineer Before Use Of Work). , Paving The Top Of Roof With Solar Reflective Ceramic Tiles Of Size 305 X 305 X 7Mm Thick Of Approved Quality And Colour Laid In Cement Mortar 1:3 (One Cement And Three M.Sand) 12Mm Thick And Pointed With Tile Grout (Nitotile Grout Or Equivalent) And Cement In The Ratio Of 1:3 For Joint, Curing Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. (The Make And Brand Of The Tiles Should Be Got Approved By The Executive Engineer Before Use On Works) , Supplying And Fixing Cuddapah Slab For Cupboard Shelf , Providing Cup-Board Shutter With Frame Using Termite / Water Proof Plywood Of 19Mm Thick Over Which Laminated Sheet Of 0.8Mm Thick Fixed Inside The Shutter And 1Mm Thick Fixed In The Outside Of The Shutter Using Fevicol Along With Necessary Furniture Fittings, Such As, Hydralic Hinges, Tower Bolt, Handles, Multi Purpose Locks Etc., As Directed By The Departmental Officers. The Design Pattern, Water Proof Plywood, Laminate Sheet And Other Materials Should Be Got Approved From The Executive Engineer Befoe Use On Wor , Cement Concrete 1:2:4 Using 20 Mm And 12 Mm Metal Including All Cost And Conveyance And All Labour Charges , Provision For Electrification , Wiring 2 X 1.5 Sq.Mm (22/0.30)Pvc Insulated Unsheathed Sc.Cu.Conductor Of 1100 V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With Tw Switch Box With In Flush With Wall Covered With Hylem Sheet Of 3 Mm Thick With Painting Of Suitable Colour For Concealed Pvc Light/ Fan Point (Sd No.25) , Supply And Fixing Of 4-40W Led Tube With Fitting Inclusive Of All Charges (Sd 88) , Wiring 2 X 1.5 Sq.Mm (22/0.30)Pvc Insulated Unsheathed Sc.Cu. Conductor Of 1100 V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With Tw Switch Box With In Flush With Wall Covered With Hylem Sheet Of 3 Mm Thick With Painting Of Suitable Colour For Concealed Pvc Plug Point (Sd No.38) 5 Pin Plug Point , Supply And Fixing Of 1200Mm Sweep Ac Ceiling Fan Complete With Stepped Electronic Regulator With 300Mm Down Rod On The Existing Clamp Sd 106 , Supply And Fixing Of Water Tight Bulk Head Fitting With Guard (Philips / Bajaj / Crompton / Klite) Suitable For Incandencent Lamp And 60W Bulb (Sd N0.83) , Supply And Run Of 2 Of 1.50 Sq.Mm Polythene Insulated Pvc Sheathed Heavy Duty Sc Copper Conductor Of 1100 V Grade On 7/20 Gi Bearer Wire For Service Connection Mains (Sd No.64) , Supply And Fixing Of Tneb Meter Board Suitable For 32A Single Phase Service Connection With 32A Fuse Unit (500V) 32A Neutral Link And Earth Link (1 X 1/8 Copper Flat) On Tw Plank Of Size 375Mm X 300Mm X 19Mm With Supporting Tw Reepers Of 1 Thick An Either Side With Painting With Suitable Bolt And Nuts For Fixing The Tw Plank On Wall With Earth Connection And Inter Connection With 7/20 Pvc Insulated Copper Wire From Eb Meter To Fuse Unit. (Sd No. 125) , Supply And Run Of 2X4 Sqmm (22/0.3) Pvc Insulated Sc Unsheathed Cu.Conductor Of 1100V Grade In 25Mm Dia Gi Pipe (Class B) Suitably Bent At Both Ends With Necessary Angle Iron Upright And End Supports For Mains Sd 70 , Supply And Fixing Of 16 Amps Dp Switch Of 500V With Metal Clad With Fuse And Neutral Sd 142 , Gst Amount For Providing Service To Government Contract Works For The Above Construction & Maintenance Works.
|
