|
Tender For Supply,Installation And Commissioning Of Lab Furniture At Csir-Iiim, Jammu , Island Table- 1 Providing D-Frames Manufactured From Standard Hollow Metal Sections; Confirming To I.S. Code 7138:1973 (Indian Standard Specification For Steel Tubes For Furniture) And All Sheet Metal Components Should Be Of Crca Confirming To Is Code 513:1994. The Suspended Under-Bench Welded Units Should Be Supported On Heavy-Duty Steel Frames Fully Carrying The Load Of Worktops. Its Superior Strength Combined With Aesthetically Appealing End Caps Shall Give Maximum Flexibility And Modularity While Making A Layout.Horizontal Members Are Made From Square Pipes Of 1.6 Mm Thickness. Cross-Sectional Dimensions Of The Pipe Should Be 30 X 30Mm With A Minimum Of 1.6 Mm. They Should Be Made Of Crca Ms And Coated With Pure Epoxy Powder. These Connect Two D-Frames Together As Shown Using C- Clamps/U-Clamps. Together With The D-Frames And Horizontal Members Connected Together, The Skeletal Structure Of The Work-Bench Is Formed On Which The Worktop Can Be Placed And The Hanging-Type Storage Cabinets Can Be Suspended. Horizontal Members Determine The Width Of The Lab Workbench As They Form The Member (Distance) Between Two Adjacent D-Frames. They Should Be Available In Various Widths Of 450, 600, 1050, 1200, And 1500 , Table Main 1050W-750D-900H , Table Addon 600W-750D-900H , Table Addon 1050W-750D-900H , Providing Under Bench Cabinets Which Are Pure Epoxy Powder Coated With Thickness Of 40-60 Microns And Will Be Suspended From Tubular Structure. The Cabinet Will Have A Corrosion Resistance Magnetic Strip As Shutter Catch, Shutter And Drawer Are To Be Equipped With 180 Degree Cam Lock. Pp Constructed Semi Recessed Handle To Be Screw Fitted To The Shutters. Hinges Are Of Ss-304 Knuckle Overlay Type With 270 Degree Opening And 2 Nos Of Hinges Are To Be Screw Fitted To Each Shutter And Cabinet.Unit Construction : It Will Be Welded Body Construction With Load Bearing Members Such As Top, Bottom And Stiffeners Should Have A Minimum Thickness Of 0.8 Mm And Drawer Separator Should Be Of 1.2Mm Thick.Shelf : Will Be Made Of 0.8Mm Thickness Which Should Be Adjustable To 6 Steps Of 50Mm.Shutter Will Be Over-Closing Type. It Has A Sandwich Door Construction With Shutter Front & Shutter Cover With 1.2Mm Thick Hinge Stiffener. Empty Gap Should With Filled With 15Mm Thick Paper Honeycomb For Sound Dampening.Drawer: Will Be Welded Single Piece Construction With Over-Closing Sandwich Drawer Front Filled With 15Mm Thick Paper Honeycomb For Sound Dampening.Units Will Be In 450Mm And 600Mm Widths. , Underbench Cabinet 600W-450D-674H 2S 1D , Underbench Cabinet 450W-450D-674H 1S 1D Rh , Underbench Cabinet 450W-450D-674H 1S 1D Lh , Inline Sink Unit 750W X 750D X 900H , Providing Fixed Reagent Shelves: It Will Be Complete Modular Design Consisting Of 2 Stage Horizontal Storage Shelves. 270Mm Gap To Be Maintained Between Two Shelves. Reagent Shelf Post Will Have A Cross Section Of 115Mm X 30Mm Hollow Structure Of 1.2Mm Thick. Welded Frames To Be Screw Fitted Between Two Posts And To Be Made Of 1.2 Mm Thick. And, Metal Shelves Of 0.8Mm Thick Crca Ms With Pure Epoxy Powder Coating Sheets To Kept In Between The Frames , Reagent Shelf Island Main 1500W , Reagent Shelf Island Addon 1200W , All Leg-Space Panels, Rear Cover Panels, Island Side Panels Etc. Should Be Made From Crca Ms Panels Of Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating , Leg Space Panel Set 600W-900H , All Leg-Space Panels, Rear Cover Panels, Island Side Panels Etc. Should Be Made From Crca Ms Panelsinofter Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating , Island Side Panel Set 1500W-900H , Side Panel For Sink Unit , Side Panel For Sink Unit , Bracket For Island Table , Providing And Supply Of Sink, Faucets & Accessories : Polypropylene Moulded Sinks Are Made Up Of 5 Mm Thick High Density And Elastic Poly Propylene With Good Resistance To Organic Solvents. Standard Bowl Size (L X W X D) Is 500 X 400 X 300 Mm. Faucet Shall Be 3-Way Or 1-Way Type Faucet Of Approved Make. Service Fittings Are Of Laboratory Grade, And Water Faucets And Valve Bodies Are Of Cast Red Brass Alloy Or Bronze Forgings, All Fittings Are Of Powder Plated Unless Specified Otherwise. , Pp Drop-In Sink 560 Mm (W) X 355 Mm (D) , 3 Way Water Faucet Bench Mounted, 8 Swing Gooseneck , Flexible/F Serated Connector , Anti-Siphon Bottle Trap , Providing And Supply Of Granite Work Top : It Shall Be 19Mm (+/- 2Mm) Thick Jet Black Granite Worktop. The Exposed Edges Of The Worktop Shall Be Chamfered And Smoothened. The Bottom Of The Worktop Shall Be Polished And There Shall Be A V-Groove Throughout The Length Of The Exposed Edges To Protect The Cabinets From Coming In Contact With The Spillages. The Overhang On The Storage Cabinet Is 25 Mm At The Front Side And 30 Mm At The Sides. The Backing Material Used Is A Neoprene Mat Of 6 Mm Thickness. , Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk , Neoprene Strip (Running Meter) (30Mm Wide & 6 Mm Thick) , Silicon Sealant - Black , Masking Tape , Providing And Supply Of Electrical Accessories , 16A, 1 Way Switch , 6/16A, 6 Pin Shutter Socket , 3 Module Plate , Wall Table-1 Providing D-Frames Manufactured From Standard Hollow Metal Sections; Confirming To I.S. Code 7138:1973 (Indian Standard Specification For Steel Tubes For Furniture) And All Sheet Metal Components Should Be Of Crca Confirming To Is Code 513:1994. The Suspended Under-Bench Welded Units Should Be Supported On Heavy-Duty Steel Frames Fully Carrying The Load Of Worktops. Its Superior Strength Combined With Aesthetically Appealing End Caps Shall Give Maximum Flexibility And Modularity While Making A Layout.Horizontal Members Are Made From Square Pipes Of 1.6 Mm Thickness. Cross-Sectional Dimensions Of The Pipe Should Be 30 X 30Mm With A Minimum Of 1.6 Mm. They Should Be Made Of Crca Ms And Coated With Pure Epoxy Powder. These Connect Two D-Frames Together As Shown Using C- Clamps/U-Clamps. Together With The D-Frames And Horizontal Members Connected Together, The Skeletal Structure Of The Work-Bench Is Formed On Which The Worktop Can Be Placed And The Hanging-Type Storage Cabinets Can Be Suspended. Horizontal Members Determine The Width Of The Lab Workbench As They Form The Member (Distance) Between Two Adjacent D-Frames. They Should Be Available In Various Widths Of 450, 600, 1050, 1200, And 1500 , Table Main 1200W-750D-900H , Table Addon 1200W-750D-900H , Providing Under Bench Cabinets Which Are Pure Epoxy Powder Coated With Thickness Of 40-60 Microns And Will Be Suspended From Tubular Structure. The Cabinet Will Have A Corrosion Resistance Magnetic Strip As Shutter Catch, Shutter And Drawer Are To Be Equipped With 180 Degree Cam Lock. Pp Constructed Semi Recessed Handle To Be Screw Fitted To The Shutters. Hinges Are Of Ss-304 Knuckle Overlay Type With 270 Degree Opening And 2 Nos Of Hinges Are To Be Screw Fitted To Each Shutter And Cabinet.Unit Construction : It Will Be Welded Body Construction With Load Bearing Members Such As Top, Bottom And Stiffeners Should Have A Minimum Thickness Of 0.8 Mm And Drawer Separator Should Be Of 1.2Mm Thick.Shelf : Will Be Made Of 0.8Mm Thickness Which Should Be Adjustable To 6 Steps Of 50Mm.Shutter Will Be Over-Closing Type. It Has A Sandwich Door Construction With Shutter Front & Shutter Cover With 1.2Mm Thick Hinge Stiffener. Empty Gap Should With Filled With 15Mm Thick Paper Honeycomb For Sound Dampening.Drawer: Will Be Welded Single Piece Construction With Over-Closing Sandwich Drawer Front Filled With 15Mm Thick Paper Honeycomb For Sound Dampening.Units Will Be In 450Mm And 600Mm Widths. , Underbench Cabinet 600W-450D-674H 2S 1D , Providing And Supply Of Welded Top Units : Over Head Cabinets Are Pure Epoxy Powder Coated With Thickness Of 40-60 Microns And Should Be Fixed On The Wall. The Cabinet Will Have A Corrosion Resistance Magnetic Strip As Shutter Catch, Shutters Are To Be Equipped With 180 Degree Cam Lock. Pp Constructed Semi Recessed Handle To Be Screw Fitted To The Shutters. Hinges Are Of Ss-304 Knuckle Overlay Type With 270 Degree Opening And 2 Nos Of Hinges Are To Be Screw Fitted To Each Shutter And Cabinet.Unit Construction : It Will Be Welded Body Construction With Load Bearing Members Such As Top, Bottom And Stiffeners Should Have A Minimum Thickness Of 0.8 Mm.Shelf : Will Be Made Of 0.8Mm Thickness Which Should Be Adjustable To 6 Steps Of 50Mm.Shutter Will Be Over-Closing Type. It Has A Sandwich Door Construction With Shutter Front & Shutter Cover With 1.2Mm Thick Hinge Stiffener. Empty Gap Should With Filled With 15Mm Thick Paper Honeycomb For Sound Dampening.Units Will Be In 450Mm And 600Mm Widths. , Wall Cabinet 600W-320D-674H 2S , Providing And Supply Of Electrical Trunking: Using For Housing Electrical Switches And Sockets, Its Top Panel, Bottom Panel Of The Trunking Should Be Made From Minimum Of 0.8Mm Thick Body. It Should Be Available In Both, Single Sided And Double-Sided Configurations. It Should Be Made From Crca Ms With Pure Epoxy Powder Coating. The Front Surface That Houses The Electrical Points Should Have A Slope. , Table Mounted Trunking , All Leg-Space Panels, Rear Cover Panels, Island Side Panels Etc. Should Be Made From Crca Ms Panels Of Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating , Leg Space Panel Set 600W-900H , All Leg-Space Panels, Rear Cover Panels, Island Side Panels Etc. Should Be Made From Crca Ms Panels Of Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating , Rear Side Panel Set 750D-900H , Providing And Supply Of Granite Work Top : It Shall Be 19Mm (+/- 2Mm) Thick Jet Black Granite Worktop. The Exposed Edges Of The Worktop Shall Be Chamfered And Smoothened. The Bottom Of The Worktop Shall Be Polished And There Shall Be A V-Groove Throughout The Length Of The Exposed Edges To Protect The Cabinets From Coming In Contact With The Spillages. The Overhang On The Storage Cabinet Is 25 Mm At The Front Side And 30 Mm At The Sides. The Backing Material Used Is A Neoprene Mat Of 6 Mm Thickness. , Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk , Neoprene Strip (Running Meter) (30Mm Wide & 6 Mm Thick) , Silicon Sealant - Black , Masking Tape , Providing And Supply Of Electrical Accessories , 16A, 1 Way Switch , 6/16A, 6 Pin Shutter Socket , Fumehood , 4 Feet Benchtop Abp Aeolus Fume Hood Without Any Accessories , Eco Panel (0.75 To 1 Hp) With Tl/ Bl For Aeolus Fumehood , Led Light For 4 To 6 Ft Aeolus Fumehood , 3 Module Plate With Socket & Tiny Trip For Aeolus Fume Hood , Apparatus Grid For 4 Feet Benchtop Aeolus Fumehood (Epoxy) , Raw Water (Flexible Tubing Service Valves For Benchtop Aeolus Fumehood) (Rhs) , Compressed Air (Flexible Tubing Service Valves For Benchtop Aeolus Fumehood) (Rhs) , Nitrogen (Flexible Tubing Service Valves For Benchtop Aeolus Fumehood) (Rhs) , Ceiling Front Cover Panel For 4 Feet Aeolus Fumehood , Ceiling Lh/ Rh Side Cover Panel For Aeolus Fumehood , Fixed Type Apparatus Storage Cabinet For Bench Top Aeolus Fume Hood (600 Width) , Rear Support Panel Offixed Type Apparatus Storage Cabinet For Benchtop Aeolus Fumehood , Centrifugal Blower & Accessories , Supply, Installtion Of Pp/Frp Blower Of 1100 Cfm At 50 Mm Wcmm Static Pressure With 1Hp Nflp Motor And Its Motor Weather Cover And Vibraation Pads With Anchor Fastners. , Blower Weather Cowl (Frp Outlet) & Ms Stack Support With Required Clamps , 10 (250Mm) 100% By Pass Damper With Two Side Flange , Pp/Frp Ducting & Accessories For Fume Hood & Spot Extractor Exhaust Design, Supply & Installation Of Pp-Frp Ducting Of Wall Thickness 3Mm Ppgl + 3Mm Frp For Sizes Up To 500Mm Dia, Above 501Mm Dia 4Mm Ppgl + 4 Mm Frp Shall Be Used Unless Otherwise Specified. Including Clamps, Hanging Support, All Hardwares Required To Complete Ducting Work. , Ducting Upto 500Mm Dia - Wall Thickness Shall Be 3 Mm For Pp And Frp.
|
