|
Tender For Supply,Installation, Commission And Demonstration Of Laboratory Furniture For Fermentation Divisionhood , Providing D-Frames Manufactured From Standard Hollow Metal Sections; Confirming To I.S. Code 7138:1973 (Indian Standard Specification For Steel Tubes For Furniture) And All Sheet Metal Components Should Be Of Crca Confirming To Is Code 513:1994. The Suspended Under-Bench Welded Units Should Be Supported On Heavy-Duty Steel Frames Fully Carrying The Load Of Worktops. Its Superior Strength Combined With Aesthetically Appealing End Caps Shall Give Maximum Flexibility And Modularity While Making A Layout.Horizontal Members Are Made From Square Pipes Of 1.6 Mm Thickness. Cross-Sectional Dimensions Of The Pipe Should Be 30 X 30Mm With A Minimum Of 1.6 Mm. They Should Be Made Of Crca Ms And Coated With Pure Epoxy Powder. These Connect Two D-Frames Together As Shown Using C-Clamps/U-Clamps. Together With The D-Frames And Horizontal Members Connected Together, The Skeletal Structure Of The Work-Bench Is Formed On Which The Worktop Can Be Placed And The Hanging-Type Storage Cabinets Can Be Suspended. Horizontal Members Determine The Width Of The Lab Workbench As They Form The Member (Distance) Between Two Adjacent D-Frames. They Should Be Available In Various Widths Of 450, 600, 1050, 1200, And 1500 , Table Addon 1200W-750D-900H , Table Main 1050W-750D-900H , Providing Under Bench Cabinets Which Are Pure Epoxy Powder Coated With Thickness Of 40-60 Microns And Will Be Suspended From Tubular Structure. The Cabinet Will Have A Corrosion Resistance Magnetic Strip As Shutter Catch, Shutter And Drawer Are To Be Equipped With 180 Degree Cam Lock. Pp Constructed Semi Recessed Handle To Be Screw Fitted To The Shutters. Hinges Are Of Ss-304 Knuckle Overlay Type With 270 Degree Opening And 2 Nos Of Hinges Are To Be Screw Fitted To Each Shutter And Cabinet.Unit Construction : It Will Be Welded Body Construction With Load Bearing Members Such As Top, Bottom And Stiffeners Should Have A Minimum Thickness Of 0.8 Mm And Drawer Separator Should Be Of 1.2Mm Thick.Shelf Will Be Made Of 0.8Mm Thickness Which Should Be Adjustable To 6 Steps Of 50Mm.Shutter Will Be Over-Closing Type. It Has A Sandwich Door Construction With Shutter Front & Shutter Cover With 1.2Mm Thick Hinge Stiffener. Empty Gap Should With Filled With 15Mm Thick Paper Honeycomb For Sound Dampening.Drawer: Will Be Welded Single Piece Construction With Over-Closing Sandwich Drawer Front Filled With 15Mm Thick Paper Honeycomb For Sound Dampening.Units Will Be In 450Mm And 600Mm Widths. , Underbench Cabinet 450W-450D-674H 1S 1D Rh , Underbench Cabinet 600W-450D-674H 2S 1D , Providing And Supply Of Welded Top Units : Over Head Cabinets Are Pure Epoxy Powder Coated With Thickness Of 40-60 Microns And Should Be Fixed On The Wall. The Cabinet Will Have A Corrosion Resistance Magnetic Strip As Shutter Catch, Shutters Are To Be Equipped With 180 Degree Cam Lock. Pp Constructed Semi Recessed Handle To Be Screw Fitted To The Shutters. Hinges Are Of Ss-304 Knuckle Overlay Type With 270 Degree Opening And 2 Nos Of Hinges Are To Be Screw Fitted To Each Shutter And Cabinet.Unit Construction : It Will Be Welded Body Construction With Load Bearing Members Such As Top, Bottom And Stiffeners Should Have A Minimum Thickness Of 0.8 Mm.Shelf : Will Be Made Of 0.8Mm Thickness Which Should Be Adjustable To 6 Steps Of 50Mm.Shutter Will Be Over-Closing Type. It Has A Sandwich Door Construction With Shutter Front & Shutter Cover With 1.2Mm Thick Hinge Stiffener. Empty Gap Should With Filled With 15Mm Thick Paper Honeycomb For Sound Dampening.Units Will Be In 450Mm And 600Mm Widths. , Wall Cabinet 600W-320D-674H 2S , Providing Fixed Reagent Shelves: It Will Be Complete Modular Design Consisting Of 2 Stage Horizontal Storage Shelves. 270Mm Gap To Be Maintained Between Two Shelves. Reagent Shelf Post Will Have A Cross Section Of 115Mm X 30Mm Hollow Structure Of 1.2Mm Thick. Welded Frames To Be Screw Fitted Between Two Posts And To Be Made Of 1.2 Mm Thick. And, Metal Shelves Of 0.8Mm Thick Crca Ms With Pure Epoxy Powder Coating Sheets To Kept In Between The Frames , Reagent Shelf Island Addon 1200W , Reagent Shelf Island Main 1200W , All Leg-Space Panels, Rear Cover Panels, Island Side Panels Etc. Should Be Made From Crca Ms Panels Of Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating , Leg Space Panel Set 600W-900H , All Leg-Space Panels, Rear Cover Panels, Island Side Panels Etc. Should Be Made From Crca Ms Panels Of Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating , Rear Side Panel Set 750D-900H , All Leg-Space Panels, Rear Cover Panels, Island Side Panels Etc. Should Be Made From Crca Ms Panels Of Minimum 0.8Mm Thickness With Pure Epoxy Powder Coating , Island Side Panel Set 1500W-900H , Providing And Supply Of Electrical Trunking: Using For Housing Electrical Switches And Sockets, Its Top Panel, Bottom Panel Of The Trunking Should Be Made From Minimum Of 0.8Mm Thick Body. It Should Be Available In Both, Single Sided And Double-Sided Onfigurations. It Should Be Made From Crca Ms With Pure Epoxy Powder Coating. The Front Surface That Houses The Electrical Points Should Have A Slope. , Table Mounted Trunking , Providing And Supply Of Granite Work Top : It Shall Be 19Mm (+/- 2Mm) Thick Jet Black Granite Worktop. The Exposed Edges Of The Worktop Shall Be Chamfered And Smoothened. The Bottom Of The Worktop Shall Be Polished And There Shall Be A V-Groove Throughout The Length Of The Exposed Edges To Protect The Cabinets From Coming In Contact With The Spillages. The Overhang On The Storage Cabinet Is 25 Mm At The Front Side And 30 Mm At The Sides. The Backing Material Used Is A Neoprene Mat Of 6 Mm Thickness. , Jet Black Granite (Sq.Mt.) 20 (±2) Mm Thk , 6 Mm Self Adhesive Natural Rubber Strip , Silicon Sealant - Black , Masking Tape , 16A, 1 Way Switch , 3 Module Plate With Socket & Tiny Trip For Fume Hood , 5 Feet Benchtop Abp Fume Hood Without Any Accessories , Airflow Monitor For Fumehood , Anti-Siphon Bottle Trap , Apparatus Grid For 5 Feet Benchtop Fumehood (Epoxy) , Back Panel Set For Frame Based Understructure For 5 Feet Benchtop Fumehood , Ceiling Front Cover Panel For 5 Feet Fumehood , Ceiling Lh/ Rh Side Cover Panel For Fumehood , Compressed Air (Flexible Tubing Service Valves For Benchtop Fumehood) , Eco Panel (2 Hp) With Tl/ Bl For Fumehood , Flexible/F Serated Connector , Frame Based Understructure For 5 Feet Bench Top Fumehood With No Cut-Out On Trunking , Led Light For 4 To 6 Ft Fumehood , Mobile Apparatus Storage Cabinet For Bench Top Fume Hood With Frame Based Understructure 700W , Nitrogen (Flexible Tubing Service Valves For Benchtop Fumehood) , Raw Water (Flexible Tubing Service Valves For Benchtop Fumehood) , Side Panel Set For Frame Based Understructure Benchtop Fumehood , Providing And Supply Of Electrical Accessories , 3 Module Plate , 6/16A, 6 Pin Shutter Socket , Centrifugal Blower And Accessories , Supply, Installtion Of Pp/Frp Blower Of 1000 Cfm At 50 Mm Wcmm Static Pressure With 2Hp Nflp Motor And Its Motor Weather Cover And Vibraation Pads With Anchor Fastners. , Blower Weather Cowl (Frp Outlet) & Ms Stack Support With Required Clamps , 10 (250Mm) 100% By Pass Damper With Two Side Flange , Chairs , Seat Assembly: The Seat Should Be Made Up Of 1.2±0.1Cm Thick Flat Plywood And With Moulded Polyurethane Foam And Should Be Upholstered With Replaceable Synthetic Leather Covers.Seat Size: Diameter 40.0 Cm.Adjustments: 360° Revolving Type.High Resilience (Hr) Polyurethane Foam: The_Hr.Polyurethane Foam Should Be Moulded With Density = 45 +1-2 Kg/M3 And Hardness Load 16 ± 2 Kgf For 25% Compression.Height Adjustment: The Manual Height Adjustment Should Be Very Easy To Operate With A Help Of A Knob.It Can Be Easily Locked At The Most Comfortable Position. Pedestal Assembly: The Five-Prong Pedestal Should Be Fabricated From 0.2 ± 0.02 Cm :Thick Hr Sheet. (Should Be:Dd 1079/Hr ), Powder Coated (Dft 40-60 Microns) And Fitted With An Injection Moulded Black Polypropylene Hub Cap And 5 Nos. Twin Wheel Castors.The Pedestal-Should Be 55.0±0.5Cm Pitch-Circle-Diameter (65.0±-1,0Cm- With-Castors).-Circular-Foot-Ring Of 052.0 ± 0.2Cm Made Up Of 01.9±0.2 X 0.12±0.0096Cm Thk M.S.E.R.W Tube For Foot Support In High-Base Stool.Twin Wheel Castors: The Twin Wheel Castors Should Be Injection Moulded In Black Nylon.Seat Size- Dia 40.0Cm.Adjustments- 360 Degree Revolving Type.Width- 65.0Cm.Depth- 65.0 Cm.Seat Height- 67.0 To 78.5Cm.
|
