Tenders Are Invited For Maintenance Of Forest Roads And Logging Trails In The Sieniawa Forest District In 2026 in Poland

Work Detail

The Scope Of The Forest Road Maintenance Task Includes The Following Works: 1. Mechanical Mowing Of Lichens From Roadsides, Slopes And The Bottom Of Ditches - Work With Mechanical Brushcutters In The Amount Of 2000 M22. Mechanical Mowing Of Lichens On Roadsides And Slopes Up To 2 M Wide - Work With A Tractor + Flail Mower In The Amount Of 2000 M2. Manual Removal Of Bushes From Roadsides And Slopes Of Ditches, With Depositing The Remains Outside The Ditch In The Amount Of 1500 M24. Mechanical, Sectional, One-Sided Cutting Of The Elevated Sides Of Forest Roads On An Average Width Of 0.75 M, With An Average Thickness Of 5 Cm, With Depositing The Spoil Outside The Ditch Within The Reach Of The Excavator Arm, With Spreading In The Amount Of 600 M2.5. Repairs Of Dirt Roads With Sand / Native Soil - Delivery Of Material, Profiling, Compaction With A Roller (Material On The Contractors Side) In The Amount Of 190 M36. Repairs Of Dirt Roads With Ground Concrete Rubble - Delivery Of Material, Profiling, Compaction With A Roller (Material On The Contractors Side) In The Amount Of 220 M37. Mechanical Profiling And Compaction Of The Subgrade Performed Mechanically In Soil Of Categories Ii-Iv Under The Structural Layers Of The Surface In The Amount Of 2000 M28. Cleaning Of Ditches From Silt Thick Up To 10 Cm Without Disturbing The Ditch Slopes. The Excavated Material Should Be Spread And Leveled In The Adjacent Area - Outside The Ditch Within The Reach Of The Excavator Arm, In The Amount Of 220 M9. Cleaning The Ditches With Profiling Of The Bottom And Slopes From Silt With A Thickness Of 10 Cm Along With The Removal Of The Excavated Material Up To 2 Km With Self-Dumping Vehicles In The Amount Of 220 Mb10. Mechanical Grubbing Up Of Stumps With A Backhoe Excavator (Diameter: 16-25 Cm) Together With Removal Of The Stumps To The Place Indicated By Sl In The Number Of 1011 Pcs. Mechanical Grubbing Up Of Stumps With A Backhoe Excavator (Diameter: 26-35 Cm) With Removal Of Stumps To The Place Indicated By Sl In The Number Of 1012 Pcs. Mechanical Grubbing Up Of Stumps With A Backhoe Excavator (Diameter: 36-45 Cm) Together With Removal Of Stumps To The Place Indicated By Sl In Number Of 1013 Pieces. Mechanical Grubbing Up Of Stumps With Backhoe Excavator (Diameter: 56-65 Cm) Together With Removal Of Stumps To The Place Indicated By Sl In Number Of Pcs. 514. Pass-Through Parts Of Prefabricated Single-Hole Pipe Road Culverts Made Of Pipes With A Diameter Of 50 / 60 Cm - Replacement Of Individual Rings, Along With The Construction Of A Footing With A Thickness Of 20 Cm Including Backfilling With Loose Material, Including Earthworks. Disposal Of Demolition Material On The Contractors Side In The Amount Of 2M15. Construction Of A Pipe Culvert With A Diameter Of 40 Cm Made Of Pp/Hdpe Sn8 Pipes, On A Bench Made Of Natural Aggregate 20 Cm Thick, With Backfilling With Loose Material, Including Earthworks And The Purchase And Installation Of Prefabricated Front Walls. Disposal Of

Contact Information