Tenders Are Invited For Reconstruction Of The Supporting Structure And Replacement Of A Recessed Truck Scale ... in Poland

Work Detail

The Subject Of The Order Includes Construction Works Consisting In The Modernization And Reconstruction Of The Existing Infrastructure Of A Submerged Truck Scale With A Load Capacity Of 60 Mg, Located On Plot No. 1458/3. The Scope Of Work Includes Reconstruction Of The Supporting Structure And Replacement Of The Existing Scale With A New One, In Accordance With The Existing Design Documentation. The Modernization Aims To Adapt The Facility To Current Utility Needs And Increase The Operating Parameters Of The Scale. After The Works Are Completed, A Scale Will Be Installed With Enlarged Platform Dimensions Of 16 × 34.1. The Task Should Include: 1) Dismantling The Existing Scale; After Dismantling, The Scale Should Be Placed In The Place Indicated By The Ordering Party. Management Of The Dismantled Scale (I.E. Steel Structure, Sensors, Weighing Meter) Is The Responsibility Of The Ordering Party. 2) Reconstruction Of The Scales Foundations3) Installation Of A Prefabricated Steel And Reinforced Concrete Platform4) Installation Of Measurement Electronics And Its Commissioning (The System Must Be Integrated With The Weighing Software Operating At The Plant - Gsw Orange Gs Software Hardening The Area Around The Scale (Within The Scale)5) Obtaining All Required Decisions, Permits And Legalization Of The Scale Needed For Use4.2. Weighing Device:4.2.1 Weighing Plate Supported On The Foundation By 8 Strain Gauge Sensors Cooperating With A Weighing Meter.4.2.2. Technical Parameters Of The Scale: 1) Load Capacity Up To 60 Tons2) Platform Length 16.0M3) Platform Width 3.0M4) Minimum Weighing Range 400 Kg5) Verification Unit 20 Kg6) Accuracy Class Iii Oiml7) Class C38 Transducers) Temperature Range From -30°C To +40°C9) Stainless Steel Digital Sensors, Metal-Braided Cables, Cables Enabling Their Replacement Without The Need To Replace The Entire Sensor-Plug, 10) Minimum 9-Year Anti-Overvoltage Warranty.11) External Led Display, Letters At Least 120 Mm High, Inox Steel12) The Weighing Meter Should Have Outputs For Signal Light Sensors4.2.2. Starting The Device And Integrating The Weighing Meter With The Program Used By The Ordering Party, 4.2.3. The Training Of The Ordering Partys Staff, Covering At Least 4 People, 4 Hours Each, Designated To Operate The Scale, Should Be Confirmed With A Training Protocol.4.3. The Ordering Party Stipulates That If Such A Need Arises - Resulting From The Need To Properly Implement The Investment Or In Order To Protect The Scale Against Damage During The Works - The Contractor Is Obliged To Temporarily Move The Second, Existing On-Site Scale At The Plant To A Place Indicated By The Ordering Party, Located On A Hardened Square In Front Of The Weighing Container. In The Event Of A Transfer, The Contractor Is Obliged To Provide A Set Of Documents (I.E. A Certificate Of Legalization And Calibration Of The Scale) Confirming The Correctness Of The Measurements Performed, Both During Operation Of The Scale In The Temporary Location And Af

Contact Information