|
Reinforcing Paper Tape, 50 Mm Wide, Roll. Purpose: Reinforcement Of Joints, Internal Corners, Sealing Cracks, Crack Resistance. Material: Durable Cellulose, Often Perforated To Allow Air To Escape. Width: Standard 50 Mm Or 52 Mm (Eg Knauf). Thickness: About 0.2 Mm, Which Allows You To Hide The Seams. Properties: Does Not Stretch When Moistened, Does Not Wave, Holds The Fold (Corner Shape) Well. Packaging: Rolls 50 M Long. Application: The Tape Is Laid On A Fresh Layer Of Putty, Pressed In With A Spatula, Then Covered With The Finishing Layer. Provides Maximum Seam Strength Compared To Serpyanka., Cellophane Film (200 Microns). Main Characteristics (200 Microns / 0.2 Mm): Type: Technical (Often 2Nd Grade) Or Primary, Usually Sleeve/Half-Sleeve. Strength: High Resistance To Mechanical Loads, Cuts, Tears. Light Transmission: Transparent Film - Up To 85%. Heat Resistance: Durable, Retains Properties Under Temperature Fluctuations. Dimensions: Popular Width Options: 1.5 M (3 M Spread). Weight: Typically 25 Kg Per Roll (Depending On Winding)., Plotter Paper Cut From Arakal, Plasterboard Sheet 1200*2500*12.5. Thickness 12.5 Mm Standard Width 1200 Mm Sheet Length 2000 / 2500 / 3000 Mm Weight 1 M² ~8.5 – 9.5 Kg (Depending On Core Density) Sheet Weight (2500X1200) ~27 – 29 Kg Density No Less Than 800 Kg/M³ Thermal Conductivity 0.22 – 0.35 W/(M K) Flammability Group G1 (Low Flammability) Gray Regular Plasterboard Gost 6266-97, Sealing Tape 75Mm. Material: Foamed Polyethylene (Ppe) With A Closed Porous Structure. Width: 75 Mm. Thickness: Typically 2 - 3 Mm (Used For Tight Abutment Of Pn 75/40 Guide Profiles Or Frame Guides). Adhesive Layer: Self-Adhesive Side With Protective Film For Easy Installation. Color: Gray Or White. Roll Length: 30 Meters. Functions: Sound Insulation (Reduction Of Vibrations), Thermal Insulation, Sealing (Protection From Dust And Moisture). Advantages: Durability, Waterproof, Elasticity., Self-Tapping Screws Gkl-Metal 3.5X35 Mm, Pcs. (Self-Tapping Piercing Screw Tn) Phosphated Self-Tapping Piercing Elements With A Sharp End, Designed For Fastening Plasterboard Sheets (Gypsum Board, Gypsum Board) To A Metal Profile Up To 0.7 Mm Thick. Dimensions: Diameter 3.5 Mm, Length 35 Mm. Tip: Sharp, Piercing, Allows Quick Start Of Installation Without Pre-Drilling. Head: Countersunk (Horn-Shaped), Allows The Head To Be Completely Recessed Into The Gypsum Board Without Damaging The Cardboard, And Provides A Flat Surface For Finishing. Spline: Cross-Shaped Ph2 (Phillips 2) For Reliable Grip On The Bat. Material And Finish: Made From High Strength Carbon Steel With A Black Phosphated Finish To Resist Corrosion. Application: Ideal For Attaching Gypsum Boards To A Metal Frame Up To 0.7 Mm Thick (Profiles 0.5–0.6 Mm, Reinforced Profiles). Length 35 Mm: Optimal For Two Layers Of Plasterboard (E.G. Mm) Or Fastening One Sheet Through The Sheathing., Skirting Board 100Mm (Length 2000Mm Polyurethane). A Moisture-Resistant And Flexible Finishing Material, Ideal For Hiding Uneven Walls And Cables. Used For Painting, Resistant To Temperature Changes And Mold. Material: Polyurethane (Sometimes High Impact Polystyrene/Duropolymer). Height: 100 Mm (High Plinth, Trend 2024-2025). Bar Length: 2000 Mm (Standard). Features: Presence Of Cable Channel, Moisture Resistance. Installation: Attached With Special Polymer Glue Or Adhesive Putty (Solvent-Free Compositions). Design: White Or Paintable., Finishing Putty Alinex, 25 Kg. The Main Type Is Alinex Finish Wp (Cement, White, For Dry/Wet Rooms And Facades, Layer 1–5 Mm) Or Polymer Alinex Finish P. Type: Cement (Wp - Moisture Resistant) Or Polymer (P - For Dry Areas). Color: White. Packing: Paper Bag 25 Kg. Consumption: ~1.2 Kg Per 1 M² With A Layer Thickness Of 1 Mm. Layer Thickness: For Wp - 1–5 Mm, For P - 0.5–2 Mm. Solution Viability: Cement (Wp) - 3 Hours, Polymer (P) - Up To 12 Hours., Metal Profile Pu 25*25*2500, Pcs. Perforated Aluminum Corner 25*25*2500*0.26 Metal Pu 25252500 (Perforated Corner-Protecting Corner) - An Aluminum Or Galvanized Product To Protect The Corners Of Slopes And Walls From Damage. It Is Used Indoors And Outdoors, Fixed With Putty Or Plaster Thanks To Perforation. Key Features: Type: Perforated Corner (Pu). Dimensions: 25X25 Mm (Shelves), 2500 Mm (Length). Material: Aluminum Alloy (Does Not Rust) Or Galvanized Steel. Purpose: Protection Of Corners, Reinforcement Of Plaster Layers. Installation: Embedded In Plaster Mortar., Wall Molding (Length 2000Mm Polyurethane). Density: The Average Is 200–300 Kg/M³. Temperature Range: The Material Is Stable At Temperatures From -40°C To +80°C (Short-Term Up To +100°C). With Constant Heating Above +120°C, The Structure Begins To Collapse. The Water Absorption Rate Is Less Than 1.3–3.5%. Hardness: On The Shore Scale (Type A), The Hardness Of Interior Polyurethane Usually Exceeds 85 Units. Standard Dimensions: The Standard Length Of The Bar Is 2000 Mm (2 Meters)., Guide Profile Pn 75/40*3000. Pcs. It Has A U-Shape And Serves As Guide Elements For Rack Profiles, As Well As For Arranging Jumpers Between Them In The Frames Of Partitions And Cladding. It Is Used For Constructing Frames For Interior Partitions, Cladding And Other Structures. Characteristics Material - Steel Profile Type - Guide Profile Length, Mm - 3000 Profile Width, Mm - 40 Metal Thickness, Mm - 0.6, Marking Tape. Elastic Pvc Tapes, 33 M Long, With Rubber Adhesive, Designed For Durable Marking Of Floors, Hazardous Areas And Equipment. Material: Base Made Of Polyvinyl Chloride (Pvc), Glue - Synthetic Rubber. Dimensions: Typical Length - 33 Meters, Width - 50 Mm (Cuts From 6 Mm Are Possible). Thickness: Normal 0.125–0.13 Mm. Operating Temperature: From +4°C To +77°C (471 Series), Application Recommended At +15 - +27°C. Benefits: Durability: Resistant To Scratches, Wear And Solvents. Brightness: Color Pigment Throughout The Base, Does Not Rub Off. Elasticity: They Follow Contours Well, Bend Around Irregularities, And Are Ideal For Curved Markings. Clean Removal: Leaves No Adhesive Residue When Removed. Color: Red And White (Time Zones), Plotter Cutting Stencil Cut From Arakal (For Freestyle) Stencils Plotter Cutting Stencils, Made By Plotter Cutting - These Are Professional Application Tool Clear Drawings On The Walls. For Interior Work Self-Adhesive Film Is Most Often Used (Disposable) Specifications Materials Characteristics: Film (Oracal Type 641) Thickness 70–80 Μm (0.08 Mm) 0.3 Mm / 0.5 Mm / 0.7 Mm Purpose: Ideal For Fine Lines, Letters For Three-Dimensional Patterns, Plaster Adhesion Flexibility: Maximum (Fits Into Corners) Repeated Usage: No, Gypsum Putty “Alinex”, 25 Kg. Designed For Interior Work In Dry Rooms. The Key Product In This Category Is The Alinex Universal Base Putty. Used For Leveling Plastered, Concrete And Brick Surfaces, As Well As For Sealing Drywall Joints And Eliminating Defects In Aerated Concrete. Composition: Contains Environmentally Friendly Gypsum And Marble Filler, Which Provides A White/Light Beige Color After Drying Gost R 58278-2024, Rack Profile Ps 75/50*3000. It Has A C-Shape And Serves As Vertical Frame Posts For The Installation Of Plasterboard Partitions And Cladding. The Profile Is Used For Constructing Frames For Interior Partitions, Cladding And Other Structures. Characteristics Section 75X50 (Mm) Thickness 0.6 (Mm) Length 3000 (Mm) Width 75 (Mm) Height 50 (Mm) Net Weight 2 (Kg) Product Type Rack Profile Ps-4 Series Product Model Ps-4 Main Material Steel, Gkl-Metal Self-Tapping Screws 3.5X25 Mm, Pcs. Dimensions: Diameter - 3.5 Mm, Length - 25 Mm. Material And Coating: High-Quality Steel With A Protective Phosphate (Sometimes Oxidized) Black Coating That Protects Against Corrosion. Thread: Fine (Frequent) - For Reliable Fastening In Thin Sheet Metal. Tip: Sharp, Allows Easy Penetration Without Pre-Drilling. Head: Countersunk Carob (Cone-Shaped) For Phillips Cross-Head Slot No. 2 (Ph2). Application: Ideal For Fastening 12.5 Mm Plasterboard To A Profile With A Thickness Of 0.4–0.9 Mm. Corrosion Resistant, Easy To Screw In, Head Recessed Into Drywall, Wooden Bars (Pine) Section 50*100 Mm, Length 3000 Mm, For The Podium. Material: Pine. Section: 50X100 Mm (Actual Size May Vary Slightly Depending On The Manufacturer - Planed Or Edged). Length: 3000 Mm (3 Meters). Application: Rafter Systems, Frames For Houses, Sheathing Of Walls/Ceilings, Outbuildings, Stairs. Advantages: Mechanical Strength, Durability With Proper Processing, Ease Of Installation, Pleasant Smell. Processing: Easy To Saw. Gost 8486-86, Self-Tapping Screws For Wood 4.2*75Mm. Key Features: Diameter: 4.2 Mm. Length: 75 Mm. Thread Type: Rare (Large), Which Prevents The Wood From Cracking. Head: Concealed (Hidden In The Material). Spline: Phillips Ph2 (Philips No. 2). Material: Hardened Steel. Coating: Phosphated (Black) Or Yellow Passivated. Purpose: Installation Of Gypsum Boards (Gkl), Gypsum Fiber Sheets (Gvl) To Wooden Sheathing, Fixation Of Chipboard, Plywood And Wooden Structures., Osb1250*2500 *18Mm Board. Dimensions: Mm, 1250X2500 Sheet Area: 3.125M2 Thickness: 18 Mm. Plate Type: Osb-3 (Moisture-Resistant, For Indoor And Outdoor Structures). Weight: 36.56 Kg Per Sheet (2500X1250 Mm). Composition: High-Quality Coniferous Chips (Spruce, Pine), Synthetic Resins, Paraffin Emulsion. Application: Construction Of Frame Houses, Subfloors, Roofing Systems, Wall Cladding, Partitions. Moisture Resistance: Retains Strength When In Water, Swelling Coefficient Is About 25% Per Day. Environmental Friendliness: Formaldehyde Emission Class E1. Gost R 56309-2014, Self-Tapping Screws For Wood 3.5*50Mm. Dimensions: Thread Diameter -3.5 Mm, Length - 50 Mm. Thread Type: Rare (Large) Thread For Secure Fastening In Soft Materials. Head: Countersunk (Cone-Shaped), Recessed Into The Material For A Flat Surface. Spline: Phillips Type (Ph2) Or Pozidriv Type (Pz2). Tip: Sharp, Allows Easy Penetration. Coverage: Phosphated (Black): Protects Against Corrosion And Provides Good Adhesion To Paint/Putty. Galvanized/Yellow-Passivated (Golden): Have Increased Corrosion Resistance. Application: Construction, Furniture Production, Installation Of Plasterboard Boards On Wooden Frames.
|
