Tenders Are Invited For Construction Of A New Water Supply From The Village Of Gostilitsa To The Pressure Ta ... in Bulgaria

Work Detail

In The Implementation Of This Public Procurement, A Contractor For Construction And Assembly Works/Smr Should Be Identified For The Site: Construction Of A New Water Supply From The Village Of Gostilitsa To The Pressure Reservoir Of The Village Of Slaveykovo, Dryanovo Municipality. It Is Planned To Build A New Water Main (Thruster) - A Deviation From The Existing Thruster From Pst Dryanovo To The Nr Of The Village Of Gostilitsa To The Nr Of The Village Of Slaveykovo, And The Deviation Will Take Place In The Southern Part Of The Village Of Gostilitsa Near The Former Farmyard With A Direct Connection To The Existing Thruster. At The Starting Point Of The Deviation (Water Intake), The Necessary Service Shaft Is Provided With A Planned Shut-Off Valve, Non-Return Valve And Air Valve According To The Attached Detail To The Project, And The Connection Is Made Directly To The Existing Pusher Ф200ре By Means Of A Tee Ф200/200/200Mm Ре, Pn16. The Necessary Number Of Facilities (Air Vents, Emptying Shafts, Crossings Of Ravines And Drains, Crane Shafts) Are Planned Along The New Route Of The Thruster For The Nr In The Village Of Slaveykovo, So That The System Functions Reliably, By Providing A Suitable Route With The Possibility Of Easy Access For Maintenance And Repair After Its Construction. The Route Mainly Follows Existing Agricultural, Agricultural And Municipal Dirt Roads To Prevent The Occurrence Of Excess Pressure Along The Route Of The New Thruster, In The Event Of A Hydraulic Shock, The Necessary Number Of Intermediate Service Crane Shafts With Non-Return Valves And Air Valves To Relieve Pressure In The Pipeline Sections Separated By Means Of The Cited Intermediate Shafts Are Also Provided. The Locations Of Shafts And Thruster Service Facilities Are Shown In Situ And In Longitudinal Profile, With An Additional Detail Drawing Provided For Each Facility. It Is Envisaged That The Thruster Will Be Implemented In Sections As Follows: • From Starting Point Mn4 To Intermediate Point Pn56 With A Total Length Of L=3286.78M - The Section Is Executed With Water Pipes Ф200mm Ре100, Pn16; • From The Intermediate Point Pn56 To The End Point Mn1 (Nr V. Slaveykovo) With A Total Length Of L=934.71M - The Section Is Implemented With Water Pipes Ф110mm Ре100, Pn10. Total Length Of The Route - L=4221.49M Full Information On The Scope, Volume And Technical Requirements For The Execution Of The Public Procurement Are Described And Regulated In Part Ii Technical Specification And The Investment Project, An Integral Part Of The Participation Documentation. At The Time Of Opening The Procedure, Financing For The Execution Of The Order Is Not Provided!

Contact Information