|
1 Preliminary Services 1.1Supply And Installation Of Workplate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps.., 1.2 Temporary Water Connection (Including Sanitary Sewer Removal), 1.3 Temporary Light And Power Connection, 1.4 Conventional Location Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03/2024, 1.5 Siding With Metallic Tile. Af_03/2024, 1.6 Rental Of Container 2, 30 1.56M Wide And 1.16M Deep, Including Installation And Removal Of Equipment, Supply Of Deodorizing Chemicals, Bacteriostatic Bactericide, Toilet Paper And Own Vehicle With Mobile Suction Unit For Cleaning, 2 Concrete Structures 2.1 Implementation 2.1.1 Gas House Infrastructure 2.1.1.1Mechanized Excavation Of Trench With A Depth Of Up To 1.5 M (Average Upstream And Downstream/One Composition Per Section), Backexcavation. (0.26 M3), Width 0.8 M To 1.5 M, On 1St Category Soil, Locations With Low Level Of Interference. Af_02/2021, 2.1.1.2 Manual Trench Backfilling, With Vibrating Plate. Af_08/2023, 2.1.1.3 Loading, Maneuvering And Unloading Of Rubble In A 10 M³ Dump Truck - Loading With Hydraulic Excavator (0.80 M³ / 111 Hp Bucket) And Free Unloading (Unit: M3). Af_07/2020, 2.1.1.4 Transport With 10 M³ Dump Truck, On Paved Urban Road, Dmt Up To 30 Km (Unit: M3xkm). Af_07/2020, 2.1.1.5 Separating Layer For Execution Of Radier, Concrete Floor Or Slab On Ground, In Plastic Tarpaulin. Af_09/2021, 2.1.1.6 Ballast With Granular Material (Running Spout / Crushed Stone), Applied On Floors Or Slabs On Ground, Thickness Of 10 Cm, 2.1.1.7 Slim Concrete Ballast, Applied On Floors, Slabs On Ground Or Radiers.Af_01/2024, 2.1.1.8 Frame Of Insulated Shoe, Baldrame Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, 2.1.1.9 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, 2.1.1.10 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 10, 2.1.1.11 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 8, 2.1.1.12 Slab Frame Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 8, 2.1.1.13 Structural Concrete Block Masonry 14X19x29 Cm (Thickness 14Cm), Fbk = 4.5 Mpa, Using Trowel. Af_10/2022, 2.1.1.14 Assembly And Disassembly Of Solid Slab Formwork, Single Height, Made Of Resin Plywood Sheet And Wooden Cement, 4 Uses. Af_03/2022, 2.1.1.16 Pumpable Machined Concrete, Resistance Class C30, Includes Pumping, Launching, Densifying And Finishing Service, 2.1.2 Front Wall Infrastructure 2.1.2.1 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-60 Steel Of 5, 2.1.2.2 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 8 Ca-50 Steel, 2.1.2.3 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 10 Steel, 2.1.2.4 Manufacture, Assembly And Dismantling Of Formwork For Baldrame Beam, In Plywood Sheet Resin, E =17 Mm, 4 Uses.Af_01/2024, 2.1.2.5 Pumpable Machined Concrete, 2.1.3 Septic Tank And Filter 2.1.3.1Mechanized Trench Excavation
|
