|
Flying Drawer – Made From 15Mm Mdf. With 4 Drawers And Key, With 4 Castors, Pvc Handle Material. Approximate Measurements 670X360 (Height And Width). Color To Be Defined By Unit. (Approximate Dimensions)., Accessible Table For People In A Wheelchair (Pcr) Ma-02 (Model Fde - Fnde) 1. Description 1.1 Individual Accessible Table For People In A Wheelchair (Pcr), With Mdp Or Mdf Top, Covered On The Upper Side In Melamine Laminate And On The Lower Side In Balancing Plate, Mounted On A Tubular Steel Structure. 2. Constituents - Table 2.1 Top In Mdp Or Mdf, 18Mm Thick, Covered On The Upper Face In High Pressure Melamine Laminate, 0.8Mm Thick, Textured Finish, In Gray Color (See References), Rounded Corners (According To Project). Coating On The Lower Face In 0.6Mm Balancing Plate (Against Phenolic Plate). Application Of Claw Nuts With M6 Metric Thread And 10 Mm Length (See Details In The Project). Finished Dimensions Of 900Mm (Width) X 600Mm (Depth) X 19.4Mm (Thickness), Allowing Tolerance Of Up To +/- 2Mm For Width And Depth And +/- 1Mm For Thickness. 2.2 Tops Headed With Extruded Thermoplastic Maple Tape, Made Of Pvc (Polyvinyl Chloride), Pp (Polypropylene) Or Pe (Polyethylene), With Primer On The Bonding Face, Textured Surface Finish, In Blue Color (See References), Glued With Hot Melting Adhesive. Minimum Pull-Out Resistance Of 70N (See Manufacturing). Nominal Dimensions Of 22Mm (Width) X 3Mm (Thickness), With Tolerance Of +/- 0.5Mm For Thickness. Center The Start And End Point Of Application Of The Edge Tape At The Central Point And Opposite The Edge Of Contact With The User. The Meeting Point Of The Edge Band Must Not Have Spaces Or Displacements That Facilitate Its Removal. (Approximate Dimensions)., Work Table M6 Description• Work Table With Rectangular Top In Mdf Covered In Melamine Laminate, Mounted On A Metal Support With Two Feet. Dimensions And Tolerances? Rectangular Top: 1200 X 600 Mm +/- 10 Mm; • Height: 750 Mm +/- 5 Mm; Of People In Wheelchairs (Pcr) And Compliance With The Requirements Of Abnt Nbr 9050 The Table Must Have Free Height Under The Top: Minimum Of 730 Mm;• Top Thickness: 25.8 Mm +/- 0.6 Mm;• Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers.Features • Mdf Top, 25 Mm Thick, Covered On The Lower Face With Low Pressure Melamine Laminate (Bp), And On The Upper Face With Dealta Pressure Melamine Laminate, 0.8 Mm Thick, Gray Or White Color, Textured Finish. • Edges Topped With 180º Massive Extruded Profile, In Gray Or White Color, With The Same Tone As The Laminate Of The Top, Allowing For Small Variations Due To The Characteristics Of Each Material (Gloss, Texture). The Profile Must Be Fitted And Fixed With Adhesive To The Worktop, And Be Level With Its Surfaces. Warranty• Minimum Of Two Years From The Date Of Delivery, Against Manufacturing Defects. (Approximate Dimensions)., Work Table With Drawers Table With 15Mm Mdf Top, Drawer With 2 Drawers. Measures 1.20 X 0.60 X 0.75 (Height). Coated With Low Pressure Melamine Laminate On Both Parts. Side Structure In 50X30 Carbon Steel With 1.5Mm Plate Finished With Electrostatic Powder Painting, All Tube Meetings Or Metal Part Unions Through Mig Welding, With Anti-Aging Treatment
|
