Miscellaneous Special-Purpose Machinery – (03) Delivery Of A New Tracked Compost Wheel Turner. 1. The Subject Of The Order Is: 1) Delivery To The Ordering Party Of A Brand New (I.E. Manufactured In 2025 Or 2026), Unused, Complete, Undamaged Self-Propelled Gantry Turning Machine For Compost Piles On A Tracked Chassis To Work In Piles With A Base Of 5000 Mm And A Cross-Sectional Area Of Min. 6.2 M2 [Hereinafter Referred To As The Turner, Machine] Together With An Operational Test Of The Turner And Training Of The Ordering Partys Designated Staff (Up To 10 People) In The Technical Operation Of The Turner And The Installed Telematics System For Monitoring The Turners Operation, Operation And Maintenance, 2) Performing Services Within A Period Of 24 Months Or 2,000 Mth, Depending On Which Comes First (Hereinafter Referred To As Services), 2. The Flipper Cannot Be A Prototype And Should Come From Mass Production. 3. The Turner Will Be Used To Shift, Form And Aerate Piles, Compost And Municipal Waste Mixed In The Process Of Aerobic Stabilization Or Bio-Drying. 4. The Turner Will Work In The Outdoor Composting Yard And In The Indoor Composting Plant. The Operation Of The Turner In An Indoor Composting Plant Requires Its Adaptation To The Prevailing Conditions, I.E. - When Working In The Hall, Visibility Is Limited To 2-3 M. - The Arrangement Of Aeration Channels Defines The Arrangement Of Piles With A Base Of No More Than 5 M. - The Dimensions Of The Entrance Gates Are 799 Mm Wide And 493 Mm High - The Lowest Installation Point Inside The Hall Is 450 Mm (Curtain), 463 Mm (Sprinkler Lines). 5. The Turner Will Have, Among Others, The Following Equipment And Meet Parameters Such As: Engine - Diesel With A Minimum Power Of 250 Kw, - Meeting Eu Stage V Exhaust Purity Standards - Tank Capacity Min. 400L Working Dimensions Of The Turner: - Length: Max. 5020 Mm - Width: Max. 5700 Mm - Height: Max. 4500 Mm Prism Dimensions: - Prism Width: Max. 5000 Mm - Prism Height: Min. 2200 Mm - Area Prism Cross-Section: Min. 6.2 M 2 - Efficiency When Turning Composting Piles From The So-Called Waste. Greens With Codes 20 02 01, 02 01 03, 02 01 07, 20 01 38, 02 03 04, 03 01 05, After Grinding By A Slow-Speed Shredder: Min. 4000 M3/H 6. The Turner Must Be Adapted To Operate In Conditions Of Air Humidity Close To 100%, At A Temperature Of Approximately 40Oc, With Visibility Limited (Below 3M) By Very Strong Fog, And To Operate In An Ambient Temperature Range Of At Least -10°C To +55°C. 7. The Turning Machine Must Be Adapted To Work In An Atmosphere Containing, Among Others, Compounds Such As Ammonia And/Or Hydrogen Sulphide As Well As Suspended Dusts, Aerosols And Fungal Spores. 8. The Operators Cabin Must Be Equipped With An Effective Filtration System To Protect The Turner Operator Against These Factors. 9. The Turning Machine Should Be Suitable For Parking/Garaging In An Open Space. 10. Tracked Chassis In An Open Structure, Steel Tracks With Rubber Pads Of Increased Durability
Contact Information
Contact No.
58 672 50 00
Email
przetargi@ekodolina.pl
View Notice Now...
Fill Detail for Getting Instant Access
Download Tender Document / Tender Notice
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 110038123
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.