|
Iae. Pipe Wrench, Lever For Gripping And Rotating Pipes And Parts Without Edges. Mechanism: Lever With Adjusting Nut. Teeth: Helical, Hardened. Types Of Jaws: S-Shaped: Fixing The Pipe At Three Points. Tilt Angle 45° Or 90°. Material: Chrome Vanadium (Cr-V) Or Carbon Steel. Classification By Numbers: No. 3 (Capture Up To 2, 63 Mm). Gost 18981-73. Certificate., Iae. The Scissors Are Designed For Cutting Kevlar With A Diameter Of 2 To 10 Mm. Blade Material - Stainless Steel. Hardness: Ultra-Strong Steel (58 To 62 Hrc). Blade: Micro Serrated (Teeth). Gost 7210-75 Certificate., Iae. Cutting Wheel For Metal, Abrasive Material Electrocorundum, Bakelite Bond. Type: Abrasive. Processing Material: Metal. Diameter Of At Least 125 Mm, Bore Diameter 22.23 (Or 22.2) Mm; Disc Thickness Is At Least 1.2 Mm. Maximum Speed Up To 12250 Rpm. Certificate. Gost 21963-2002, Iae. Cutting Wheel For Metal, Abrasive Material Electrocorundum, Bakelite Bond. Type: Abrasive. Processing Material: Metal. Diameter Of At Least 250 Mm, Bore Diameter 22.23 (Or 22.2) Mm; Disc Thickness Is At Least 1.2 Mm. Maximum Speed Up To 12250 Rpm. Certificate. Gost 21963-2002, Iae. Hydraulic Nut Cutter, Angular. Functional, Technical, Quality, Performance Characteristics: Designed For Quick Separation (Dismantling) Of Parts Connected By A Bolted Connection, Where Its Unscrewing Is Not Possible. Single Acting Hydraulic Cylinder With Spring Return. Force Of At Least 5 Tons. Size Range (Thread) M6-M12. Maximum Operating Pressure – 700 Bar. The Knife Is Made Of High-Quality Tool Steel, Has A Sharp Blade, And Can Be Sharpened. The Range Of Cut Nuts Is 10-19 Mm. Certificate., Iae. Hand Brush, Metal. Functional, Technical, Quality, Performance Characteristics: The Brush Is Designed For Processing Metal And Other Surfaces. Handle Shape: Straight. Brush Length Is At Least 280 Mm. The Length Of The Working Brush Is At Least 140 Mm. Handle Material: Wood. Bristle Material: Stainless Steel. Row No Less Than No Less Than 5. Certificate, Iae. Manual Pressure Tester For Hydraulic Testing. Functional, Technical, Quality, Performance Characteristics: Designed To Create A Reliable Connection (Pressure Testing) Between The Cable Core And The Cable Lug Or Sleeve. Type: Hydraulic. Crimping Profile: Hexagonal. Operating Temperature Range From Minus 20 To Plus 50 °C. Max. Cross-Section Of Non-Insulated Tips (Al) Is At Least 70 Mm². Max. Cross-Section Of Non-Insulated Tips (Cu) Is Not Less Than 70 Mm². Min. Cross-Section Of Non-Insulated Tips (Al) Is At Least 10 Mm². The Piston Stroke Is At Least 12 Mm. Min. Cross-Section Of Non-Insulated Tips (Cu) No Less Than 4 Mm², Without Automatic Pressure Release. Passport/Operation Manual. Certificate., Iae. Functional, Technical, Quality And Performance Characteristics: The Hose Is Designed For An Air Compressor. Wall Made Of Soft Pvc Or Rubber, Reinforced With Galvanized Steel Spiral. The Internal Diameter Is At Least 25 Mm, The External Diameter Is From 29 To 33 Mm. Working Pressure From 0.3 To 0.7 Mpa, Minimum Bending Radius Less Than 170 Mm. Certificate., Iae. Functional, Technical, Quality And Performance Characteristics: Machine Vices. Used In Welding And Metalworking Works. Manual Vice-Clamps With Extended Jaws No Less Than 225 Mm Long. Maximum Opening Of The Jaw (Jaws) Is Not Less Than: 79 Mm. Jaw Material: Alloy Steel Max. Grip Thickness Is At Least 40 Mm. Clamp Type: Flat Extended Jaws. Certificate, Iae. Polyethylene Film, Covering Material For Protection Against Dust, Moisture And Dirt During Storage. The Width Is Not 1.5 M, The Thickness Is From 100 To 150 Microns. A Roll Contains At Least 135 Linear Meters. Gost 10354-82. Certificate., Iae. Functional, Technical, Quality And Performance Characteristics: Carbine For Slings With A Diameter Of At Least 6 Mm. Coupling Type - Screw (With Lock). Material: Galvanized Steel. Din 5299 Standard (Pear-Shaped C). Working Load From 120 To 200 Kg. Certificate
|
