|
Flag; National Of Brazil; Measuring 1.35 X 1.93 M; Made From 100% Polyester; Double Sided; Weighing At Least 170 G/M2; With Dyes Of At Least Grade 5; Unmeshable Finish; Reinforced Stripe; With Entertel; Containing Eyelets On The Side To Attach To Mast, Flag; State Of São Paulo; Measuring 1, Flag; From The Municipality Of Itápolis; Measuring 1, Flag, Personalized, Embroidered, Tergal Verão, Measuring 1, 12 X 1, 60, Mast; In Aluminum, With Tip, For Living Room; Measuring 2.30 M Long; 29 Mm Tubular Structure, 02/03/2026 - 14:29:31, 02/03/2026 - 14:29:33, Municipal Flag, Made Of Polyethylene, Measuring 4.50 Ultra-Resistant Fabric Against Uv Rays, National Flag, In Nylon 240, Personalized Flag; Made From 100% Polyester; Double Sided; Measuring 1.93 M Approximately; Minimum Weight: 170 G/M2; With Dyes Of At Least Grade 5; Unmeshable Finish; With Reinforced Stripe; With Entertel; It Should Contain Eyelets On The Side To Attach The Brazilian National Flag To The Mast; Embroidered; Tergal Summer; Measuring 1.12 X 1.60 M - 2.5 Cloths; It Must Have Eyelets And Be Double-Sided, The Flag Of The State Of São Paulo; Embroidered; Tergal Summer; Measuring 1.60 M; It Must Have Eyelets And Be Double-Sided, The Flag Of The Municipality Of Itapolis; Embroidered; Tergal Summer; Measuring 1.5 Cabinet Cloths; It Must Have Eyelets And Be Double-Sided, With A Galvanized Steel Mast; Tubular Section; Total Measurement: 6.00M (Of Which: 3.00M C/ 3.0 In., 2.00M C/ 2.5 In. And 1.0 In.); For Patio Use; Aluminized Painting; Comes With: Fixing Screws, Pulley, Steel Cable, Fixed And Flanged Base, National Flag Of Italy; Measuring 1, Flag Of The Municipality Of Itápolis; Measuring 3.00 X 6.00 M; Made From Oxford Fabric; Non-Combustible, Resistant To High Temperatures; Tight Structure; Non-Irritating; Soft; Convenient For Bandaging Objects And Equipment With Irregular Appearance., Wooden Pedestal, Covered In Laminate, For 3 (Three) Flags, Measuring Approximately 24 Coated In Laminate; For 04 (Four) Flags; Color: Imbuia; Finished With Chrome Canopy; It Must Be Accompanied By A Stainless Steel Shoe That Protects It From Direct Contact With The Ground; Mast Fittings Must Allow For Masts With A Thickness Of 29 Mm; Approximate Measurements: 24 Cm X 16 Cm X 46 Cm (W X H X L)
|
