Bids Are Invited For Hiring A Legal Entity Specialized In The Supply Of Hospital Equipment, For Basic Health ... in Brazil

Work Detail

Horizontal Table Autoclave 75 Liters: Capacity For 75 Liters Fully Automatic Control Which Must Be Performed Through Micro Controller Temperature Selection: 120 To 134°C Cycle: Up To 60 Minutes. Drying Time: Up To 45 Minutes. Precision And Resistance Time: Type Pt 100. Hydraulic System And Vacuum Pump: With Bronze Filter, Stainless Steel Filter Elements. Solenoid Valve: Diaphragm Type Forged Brass. Safety Valve: Built In Brass. Chamber: It Must Be Made Of Stainless Steel, With A 3-Year Warranty And Externally Coated With Heat-Insulating Material Which, In Addition To Optimizing Its Energy Consumption, Must Maintain The Ambient Temperature. The Addition Of Water To The Internal Chamber Of The Autoclave Must Be Automatic. Tray: Made Of Stainless Steel, Fully Perforated, To Allow Good Steam Circulation. Lid/Door: In Stainless Steel, Laminated, With A 3-Year Warranty, With A Silicone Rubber Sealing Ring Resistant To High Temperatures. Door Closing System Device That Prevents The Equipment From Operating With The Door Open. It Must Be Constructed Robustly And Internally Equipped With A Thrust Bearing That Provides Greater Safety And Smooth Handling. Cables: Must Be Bakelite (Heat Insulated). Resistance: Must Be Nickel-Chrome, Armored In Stainless Steel Cable Cabinet: Must Be Made Of Reinforced Stainless Steel Sheet, With Anti-Corrosion Treatment And Electrostatic Painting, External And Internal. It Must Have An Opening For Venetian Ventilation. It Must Have An On/Off Switch, Display Pressure Gauge And Control Keys. Electronic Safety System: It Must Automatically Turn Off If The Temperature Exceeds The Programmed Temperature By 3°C. Mechanical And Electrical Safety System: It Must Have A Relief Valve, Protection Fuse, Safety Thermostat To Prevent Resistance And Materials From Burning In The Event Of A Lack Of Water. Built Based On Asme And Abnt Standards, Comply With Standard Nr 1..., Horizontal Autoclave 100L Capacity: Control: Programmed Controller. Approximate Internal Dimensions (Dxd): 40X60 Cm. Approximate External Dimensions (Hxwxd): 175X70x100cm. Type/Number Of Doors: 01 Automatic Sliding Door In Stainless Steel, Equipped With Anti-Prush Safety System And Silicone Sealing Trim. Power: 14Kw. Voltage: 220V Three Phase. 1.5Hp 220/380 60Hz Three-Phase Liquid Ring Vacuum Pump. Instruments: Indicative Gauge For Pressure And Vacuum In The Internal Chamber Instruments: Indicative Gauge For Pressure In The External Chamber (Jacket) And Steam Generator Automatic Control Controller Electronic Microprocessor, Have At Least 20 Sterilization Programs Between Pre-Defined And Free Programs. Enable Work Configuration From 121Oc To 134Oc. And Sterilization And Drying Time. Visualization Of Program Parameters, Pressure Time And Temperature Cycle Phases. It Has Analog Inputs For The Pt-100 Sensor, For Controlling The Pressure Of The Generator/External Chamber And For Controlling The Pressure And Vacuum Of The Internal Chamber. It Has Digital Inputs Such As Open Door, Pressure Switch And High And Low Steam Generator Level Control. Have Digital Relay Outputs Protected By Fuse To Control The Valves, Water Pump And Vacuum. Enable Serial Communication To The Printer, Enables Recording And Printing Of Data For Each Cycle Performed And Storage. As Inform

Contact Information