|
Tender For Repair Of H.No.9-J/63 In Uhs, Rohtak. -[Dnit No.-153484]-1. [10.100.1]Cement Concrete 1:8:16 Flooring 1. Cement Concrete 1:8:16 With Over Burnt (Jhama) Brick Aggregate: 90 Mm To 40 Mm Size In Foundation And Plinth. [Through Rate] 2.09 Cum 2. [10.63.2]Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 2. Size Of Tile 600X600 Mm [Through Rate] 13.94 Sqm 3. [11.5.4]12 Mm Cement Plaster Of Mix : 4. 1:6 (1 Cement: 6 Fine Sand) [Through Rate] 46.45 Sqm 4. [11.58]Providing And Applying Two Coats White Cement Based Putty Of Approved Brand And Manufacturer, Over Plastered Surface And Grinding The Surface Smooth With Sand Paper To Get En Even And Smooth Finish Including Cost And Carriage Of All Material , Labour Charges, Scaffolding, Sundries Etc. Complete [Through Rate] 92.20 Sqm 5. [11.6.2]15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 2. 1:6 (1 Cement: 6 Fine Sand) [Through Rate] 46.45 Sqm 6. [11.64.1]Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : 1. New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer [Through Rate] 46.45 Sqm 7. [11.78]Painting Two Coats Excluding Priming Coat With Synthetic Enamel Paint In All Shades On New Wood Work Or Metallic Or Plastered Or Concrete Surfaces To Give An Even Shade. [Through Rate] 22.13 Sqm 8. [11.82.1]Painting The Wooden / Metal Surface With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : 1. Two Or More Coats On New Work [Through Rate] 16.50 Sqm 9. [11.95.1]Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 1. New Work (Two Or More Coat Applied @ 1.67 Litre/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) [Through Rate] 46.45 Sqm 10. [12.10.2.1]Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4 Mm Thick Float Glass Panes, Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. 2.1. Kiln Seasoned And Chemicall 1. [12.102.1]Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 1. 125 Mm [Through Rate] 14.00 Each 12. [12.32.1.1.2]Providing And Fixing Wire Gauge Shutters Using Stainless Steel Grade 304 Wire Gauge With Wire Of Dia 0.5 Mm And Average Width Of Aperture 1.4 Mm In Both Directions For Doors, Windows And Clerestory Windows With Necessary Screws : 1.1.2. 35 Mm Thick Shutters With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size Kiln Seasoned And Chemically Treated Hollock Wood [Through Rate] 3.07 Sqm 13. [12.37.1]Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 1. 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws [Through Rate] 3.58 Sqm 14. [12.50.1]Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. 1. Fixed To Steel Windows By Welding [Through Rate] 22.04 Kg. 15. [12.88]Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Up To 35 Kg And Door Width Up To 700 Mm), With Necessary Accessories And Screws Etc. Complete. [Through Rate] 1.00 Each 16. [12.98.2]Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 2. 250X16 Mm [Through Rate] 2.00 Each 17. [12.99.4]Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 4. 150X10 Mm [Through Rate] 10.00 Each 18. [13.21.1]Supply And Fixing Windows Frames (Chowkhats) Including Mullions Consisting Frame Fabricated From Sheet Roll Formed Out Of 1.2Mm Thick Galvanized Sheet As Per Is:277 (Base Steel As Per Is 513) With Zinc Of 120 Gm/Sqm And Powder Coated With Pure Polyester Powder Up To 50 Microns (As Per Approved Colour), 3 Nos. 100Mm Butt - Hinges 2Mm Thick, 6 Nos. 1.2Mm Thick Crca Electroplated Stiffner, 6 Nos. M.S Hold Fast With Split And Tail Welded To Stiffner Plate 200Mm Long, Receiver For Aldrop, Weld Less Corner Assembly With Brackets And Screws, M.S Tie Rod 50Mm X 25Mm To Be Fixed At Bottom Finished With Powder Coated Total Thickness Of Coating 0.6Mm Of Approved Shade, Fixed In Position Including The Cost Of Cement Concrete For 1:2:4 For Fixing Lugs Complete In All Respects As Per Drawing, Design, Specification And Entire Satisfaction Of Engineer-In-Charge. 1. Door Frame Of Size 80Mm X 50Mm With 37Mm Wide Single Rebate For 35Mm Door Shutter [Through Rate 9. [13.21.2]Supply And Fixing Windows Frames (Chowkhats) Including Mullions Consisting Frame Fabricated From Sheet Roll Formed Out Of 1.2Mm Thick Galvanized Sheet As Per Is:277 (Base Steel As Per Is 513) With Zinc Of 120 Gm/Sqm And Powder Coated With Pure Polyester Powder Up To 50 Microns (As Per Approved Colour), 3 Nos. 100Mm Butt - Hinges 2Mm Thick, 6 Nos. 1.2Mm Thick Crca Electroplated Stiffner, 6 Nos. M.S Hold Fast With Split And Tail Welded To Stiffner Plate 200Mm Long, Receiver For Aldrop, Weld Less Corner Assembly With Brackets And Screws, M.S Tie Rod 50Mm X 25Mm To Be Fixed At Bottom Finished With Powder Coated Total Thickness Of Coating 0.6Mm Of Approved Shade, Fixed In Position Including The Cost Of Cement Concrete For 1:2:4 For Fixing Lugs Complete In All Respects As Per Drawing, Design, Specification And Entire Satisfaction Of Engineer-In-Charge. 2. Door Frame Of Size 125Mm X 60Mm With 37Mm Wide Double Rebate For 35Mm Door Shutter [Through Rate] 11.28 Metre 20. [13.30.1]Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. 1. Hot Finished Welded Type Tubes [Through Rate] 517.90 Kg. 21. [5.42]Dismantling Cement Conglomerate / Terrazzo Floors 25 Mm To 50 Mm Manually/ By Mechanical Means And Disposal Of Material Within Standard Lead As Per Direction Of Engineer- In-Charge. [Through Rate] 13.94 Sqm 22. [7.22.2]Brick Work With Common Burnt Clay Non-Modular Bricks Of Class Designation 10.5 In Superstructure Above Plinth Level Up To Floor Iv Level In All Shapes And Sizes In : 2. Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) [Through Rate] 3.97 Cum 23. [9.22.3]Providing Corrugated G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/ Vertical Or Curved Surfaces), Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 3. 0.63 Mm Thick With Zinc Coating Not Less Than 275 G
|
