Tenders Are Invited For Recycling Equipment – ​​Delivery, Installation And Commissioning Of A Foil Separator ... in Poland

Work Detail

Recycling Equipment – ​​Delivery, Installation And Commissioning Of A Foil Separator And A Tearer For Bags For Waste From Selective Collection. Bag Tearer Technical Data: • Type Of Device: Bag Tearer Made In Accordance With Applicable Standards And Regulations With A Minimum Capacity Of 4 Mg/H For Waste Codes 15 01 06, 15 01 02, 20 01 39, 20 01 01 And 15 01 01. • Brand New Device. Year Of Production 2026 • The Bag Ripper Must Be Adapted To Work In Various Weather Conditions. • The Bag Ripper Will Not Operate Inside The Building, Nor Will It Have A Roof In The Form Of A Shelter. • The Control Cabinet Of The Bag Ripper Must Be Adapted To Work In Various Weather Conditions. It Must Be Protected Against Sun, Rain And Snow. • Size Of The Charging Bunker Min. 12M3 (Without Extensions) • Length Of Filling Edge Min. 3600 Mm • Maximum Height Of The Loading Sill With Supporting Structure 5000 Mm • The Floor Of The Hopper Is Made In The Form Of A Chain Conveyor, Which Is Adapted And Appropriately Reinforced To Carry Loads And Resistant To Sharp Edges. • Automatic Chain Lubrication System. • Sealing Of The Conveyor Belt To Prevent Waste From Entering The Chain Links. • System For Emptying The Working Chamber In Case Of Getting Stuck With A Blocking Element. • The Device Is To Be Equipped With A Movable Tearing Comb Equipped With A System For Regulating Its Distance From The Tearing Rotor • A Tearing Comb Consisting Of Several Separate, Swinging Segments Equipped With Cutting Elements That Engage With Knives On The Tearing Rotor • Automatic Rotor Cleaning System In The Form Of A Cleaning Strip With Hydraulically Controlled Scrapers (Cleaning The Drum Surface). • Automatic Rotor Cleaning System Operating Independently Of The Tearing Comb • Operation And Control Of The Tearer Using A Touch Panel Operator Located On The External Part Of The Control Cabinet. • The Material Of The Working Elements Is Made Of Wear-Resistant Steel. • The Hopper Floor Conveyor Is Driven By A Gearbox And An Electric Motor Controlled By An Inverter. • Construction Of Platforms, Service And Inspection Hatches In Places Necessary For Servicing. • The Device Must Have A Ce Certificate Of Conformity • Warranty And Post-Warranty Repairs And Warranty Inspections Must Take Place Only In The Place Indicated By The Customer In The Swz As The Place Of Delivery • If It Is Impossible To Repair The Device In The Place Indicated By The Customer In The Swz, The Contractor Is Obliged To Provide The Customer With A Device With Similar Parameters Adapted To Work With The Existing Installation For Segregation Of Separately Collected Waste For The Duration Of The Repair • Warranty For The Offered Device Min. 12 Months • Delivery Of Technical And Commissioning Documentation For The Offered Device In Polish Along With The Submitted Offer. The Scope Of Work To Be Performed Includes: • Design And Technological Work On The New Device. • Installation Of A New Device

Contact Information