Tenders Are Invited For Thermal Modernization Of Public Buildings In The Mykanów Commune. Part I - Thermal M ... in Poland

Work Detail

Scope Of Work: 1 Thermal Modernization Of External Walls: - Installation Of Scaffolding, Anchoring To The Facade, With Roofs Over Pedestrian Crossings, - Disassembly Of Parts Of Window Sills, Roof Flashings (Wind Beams) - Dismantling Of Elements Attached To The Facade, Such As: Roof, Air Conditioners, Antennas, Ventilation Ducts, Cables Running On The Facade. - Dismantling Of Downspouts, Modification Of Sewage Inlets So That Move Them Away From The Wall And Allow For Insulation Behind The Downpipes. The Length Of These Elements Should Be Selected So That There Is A Gap Of At Least 2 Cm Between The Downpipe And The Finished Surface Of The Insulated Wall. - Partial Demolition Of The Stairs At The Main Entrance - Enabling The Insulation Of The Foundation Walls - Clean The Exposed Surfaces Of The Façade From Dirt, Dust, Deposits And Green Algae, Remove The Detached Substrates Of Plaster Fragments And Fill In The Gaps. - Perform Priming Of The Walls And Subsequent Activities Related To Insulation. Façades And External Plastering - When Applying Thermal Insulation Layers, Keep The Existing Flat Roof Ventilation Holes In The Gable Walls Unblocked, Cut Appropriate Holes In The Styrofoam, And After Applying The Surface Plasters, Install Appropriately Sized Pvc Ventilation Grids In The Holes, Additionally Protected With An Insect-Proof Mesh. - Install New Window Sills (Made Of Steel Sheet Galvanized, Coated, 0.55 Mm Thick), New Roof Flashings (Wind Beams) - Re-Laying The Entrance Stairs With Paving Stones And The Driveway For Disabled People In Accordance With The Art And The Design Part. - Before Installing The Sheet Metal, Make A Reinforced Layer In The Protected Place And Place The Mesh On The Façade For Later Installation Of The Reinforced Layer On The Façade. - Connections Of The Side Window Reveals Created After Thermal Insulation With Window Sills Should Be Made In A Way That Allows For Free Movement Of The Sill Resulting From The Thermal Work Of The Sheet (Use Specially Profiled Window Sill Ends Mounted In The Reveal) - Install Existing Downpipes. Elements Requiring Replacement Should Be Replaced In A Way That Matches The Existing Condition In Terms Of Material And Color. - Installation Of A Protective Barrier For The Disabled Access Ramp. - Install Air Conditioners And A Canopy On The Facade. Insulation With Graphite Polystyrene Foam Is Planned. 14 Cm With A Thermal Conductivity Coefficient Of Λ = 0.032 W/Mk To The Floor Level And Aqua Styrofoam Thickness. 10 Cm From The Floor Level To 50 Cm Below The Ground Level Using The Light Wet Method. The Insulation Should Form A Continuous Thermal Insulation Layer. All Gaps Between The Boards Should Be Filled With Thermal Insulation Material Over The Entire Thickness Of The Insulation. 2. Replacement Of Window Joinery: Pvc Windows, Windows To Be Replaced - 7 Pieces, 1 Piece To Be Bricked Up.3. Modernization Of The Electrical Installation In The Scope Of General Lighting Installation, Technology Power Suppl

Contact Information