|
0036901 - Chamber For The Conservation Of Blood Products/Immune/Thermolabels - Vertical Scientific Laboratory Conservation Chamber, Intended For The Storage And Conservation Of Reagents, Laboratory Supplies And Similar Materials, With An Approximate Capacity Of 560 Liters And A Temperature Operating Range Between 2 C And 8 C, Factory Programmed At 4 C. It Has A Microprocessed Digital Temperature Controller, With Security Password, Minimum And Maximum Temperature Recording With Reset Function, Audiovisual Alarms For Open Door, Temperature Deviation And Operating Faults, In Addition To A Traceable Calibration Certificate. The External Structure Is Made Of Carbon Steel With Anti-Corrosion Treatment And Electrostatic Painting, And The Internal Coating Is Made Of Polished Stainless Steel. It Has A High-Performance Hermetic Compressor Refrigeration System, Low Energy Consumption And Cfc-Free Ecological Refrigerant Fluid, Forced Air Circulation With Excellent Thermal Uniformity And Thermal Insulation In High-Density Polyurethane With A Thickness Of Approximately 75 Mm. It Has A Triple Glass Door With Anti-Fog System, Internal Led Lighting With Activation Automatic, Automatic Dry Defrost, Door Locking At 90 And Automatic Closing, In Addition To Key Access. It Has A Remote Monitoring System Via Wi-Fi Connectivity For Data Extraction, Graphs And Reports, An Internal Battery For Maintaining Alarms In Case Of Power Outages And An Automatic Telephone Dialer For Alerts. It Operates On Automatic Bivolt Voltage (127/220 V 50/60 Hz), And Is Mounted On Rotating Casters With Brakes And Meets Current Technical Standards, Being Indicated For Laboratory And Institutional Use. Approximate External Dimensions Of 1900 × 780 × 1020 Mm (H × W × D) And Internal Dimensions Of 1090 × 643 × 810 Mm (H × W × D), With A Minimum Warranty Of 12 Months. Carbon Steel Metallic, Must Contain Anti-Rust Treatment And Electrostatic Epoxy Painting. It Must Have A Top Made Of Smooth Polymeric Material, Divided Into Two Recessed Modules. It Must Contain A Drawer With At Least Four Drawers, One With A Subdivided Internal Tray For Storing Medicines, Two Conventional Drawers For Instruments And A Drawer With Greater Capacity For Larger Volume Materials. It Must Have A Side Tray With 360 Free Rotation, Designed To Accommodate A Defibrillator, Multiparametric Monitor Or Cardioverter. It Must Contain An Integrated Electrical System, With A Three-Pole Power Cable And Four Standard 2P+T Sockets For Powering Hospital Equipment. It Must Be Equipped With Four Swivel Castors With 360° Movement, And Must Contain A Brake And Two Castors. It Must Have A Rubberized Bumper Along The Entire Side Perimeter. It Must Contain A Drawer Locking System, With A Front Closure For A Seal Or Padlock And An Additional Locking System With A Security Key. It Should Come With An Iv Stand With Adjustable Height, A Support For An Oxygen Cylinder And A Rigid Board For Cardiac Massage. It Must Present Dimensions Compatible With Hospital Use, Guaranteeing Stability, Mobility And Ergonomics. It Should Be Indicated For Hospital And Institutional Use, Not Intended For Home Use., 0036903 - Pulse Oximeter - The Portable Pulse Oximeter Should Be Intended For Non-Invasive Monitoring Of Peripheral Saturation
|
