|
Foldable Infant High Chair, With Removable Tray Dimensions And Tolerances- • Height- 1050 Mm +/- 50Mm • Width- 560 Mm +/- 50 Mm • Depth- 680 Mm +/- 50 Mm • Side Protection- Minimum 140 Mm, Measured From The Top Of The Side Protection To The Surface Of Seat. • Backrest Height - Minimum 250 Mm, Measured In Vertical Position, • Backrest Angle - Minimum 60º In Relation To Horizontal (If Lower, The Minimum Backrest Length Must Be 400 Mm), • Front Edge Of The Seat - Minimum Radius Of 5 Mm. Features- • Supports Up To 15 Kg, • Folding Chair, With Tubular Structure With Circular Section In Carbon Steel, • Seat And Back Padded With Foam Covered In Vinyl Canvas Laminated With Fabric, • Armrest Or Device For Side Protection, • Tray In (Pp) Injected Polypropylene, In White, Removable Or Articulated With Rounded Edges On The Sides For Liquid Retention, • Footrest In (Pp) Injected Polypropylene, Removable Or Articulated, • Non-Slip Shoes With Rubberized Parts In Contact With The Floor. • Suspender Belt With A Minimum Width Of 25Mm, Equipped With Retention Points Between The Legs, Lap Straps And Shoulder Straps. The System For Attaching The Belt To The Chair Must Provide Safety Against Falls And Ensure The Childs Stability. •Painting Of Metallic Elements In Hybrid Epoxy/Polyester Powder Paint, Electrostatic, Glossy, Polymerized In An Oven, Minimum Thickness Of 40 Micrometers, Two-Seater Sofa Dimensions And Tolerance- • Width- 1250Mm +/- 50Mm, • Depth- 750Mm +/- 50Mm, • Height730mm +/- 30Mm. Features- • Upper Coating In Pvc Laminate With Reinforcement In Blanket (Korino) Cv 20, • Lower Finish In Raffia Fabric, • Structure- - Pine And Eucalyptus Wood From Reforestation Communization Against Mold, Termites And Microorganisms. - Seat And Back Support With High-Resistance Elastic Straps. -Structure Locking With Staples Fixed With Pneumatic Staplers. • Polyurethane Foams - - Seat - Densityd-23 - Armrest - Density D-20 - Backrests - Density D-20, Work Table Description- • Work Table With Rectangular Top In Mdf Covered With Melamine Laminate, Mounted On A Metal Support With Two Feet. Dimensions And Tolerances- • Rectangular Top- 1200 Top Thickness- 25.8Mm +/- 0.6Mm, • Paint Layer Tolerances- Minimum 40 Micrometers / Maximum 100 Micrometers. Features- • Mdf Top, 25Mm Thick, Covered On The Lower Side With Low Pressure Melamine Laminate (Bp), And On The Top Side With Dealta Pressure Melamine Laminate, 0.8Mm Thick, Gray Or White, Textured Finish. • Edges Headed With A Solid 180º Extruded Profile, In Gray Or White, With The Same Tone As The Laminate Of The Top, Allowing For Small Variations Arising From The Characteristics Of Each Material (Gloss, Texture). The Profile Must Be Fitted And Fixed With Adhesive To The Worktop, And Be Level With Its Surfaces. • Structure Consisting Of - - Carbon Steel Structure With Two Feet, With Lock In Mdfbetween Them. - Fixing The Top To The Structure Using Threaded Screws With Metal Plugs. • Adjustable Shoes Made Of Injected Nylon Or Polypropylene. • Plastic Pipe Terminations
|
