|
Fastener/Support, For Signs, In Galvanized Metal, With Base, With Approximate Measurements Of 3.50 Plate. Prismatic Reflective Films - Type I, Abnt: Nbr 14 644 Must Be Used On The Letters, Edges And Bottom Of Regulatory Plates. Centers Of The Holes Must Be 22.5 Cm Away From The Center Of The Regulation Plate. - Shape And Colors – The Signs Will Be Manufactured In Accordance With The Octagonal Format, With A 60 Cm Diameter Of The Inscribed Inner Circle, A Side Of 25 Cm, And The Technical Standards Described In Volume I – Vertical Regulatory Signage, Of The Brazilian Traffic Signage Manual., With Anti-Rust Treatment And Electrostatic Painting Finish In Black Color On Both Sides Of The Plate. Prismatic Reflective Films – Type I, Abnt: Nbr 14 644) Must Be Used On The Stripe. Black Film, Type Iv, Must Be Used For The Symbols And Letters On The Plates, 5 Cm From The Center Of The Regulatory Plate. - Shape And Colors – The Signs Will Be Manufactured In Compliance (Dimensions Of 0.60 M) And In Compliance With The Technical Standards Described In Volume I – Of Vertical Regulatory Signage, With Anti-Rust Treatment And Finishing, With Black Electrostatic Painting On Both Sides Of The Sign. Prismatic Reflective Film, Type I, Abnt: Nbr 14 644, Must Be Used On The Outer Edge And Bottom Of The Warning Plates. The Symbols, Numbers, Inner Edge And Legends Of The Warning Plates Must Use Black Film, Abnt: Nbr 14 644). The Plates Must Have 04 (Four) Holes In A Diameter Of 1/4.5 Cm From The Center Of The Warning Plate. - Shape And Colors - The Warning Signs In Dimensions (0.60 16:00:38, Paints And Textures, Asphalt Paint, For Road Signage, White Color., Yellow., Black Color., Blue., Solvent, Suitable For Acrylic Resin Paint, In 18 Liter Can., Glass Microsphere, Type Ii, 25 Kg Bag., Tack, In Polyester Based Acrylic Resin, In White Color, Format Trapezoidal With Rounded Edges, Bidirectional, With Dimensions In The Lower Base Area Of 80 Mm (+/-2) The Height Must Be 20 Mm. The Reflective Parts In White (Crystal). It Must Also Contain A Centered Pin, Galvanized With A Threaded Surface, Or In Another Form Of Groove In The Transverse Direction For Fixing, With 5/16” In Diameter And 5.00 Cm In Free Length, Studded, In Yellow, Trapezoidal Shape, Bi-Reflective, Rounded Edges, Lower Base Dimensions Of 250 Mm (+/- 2) X 150 Mm (+/-2), And Upper Base Of 165 Mm (+/- 2) 500 Mm (+/-2) Free In Length And
|
