|
Completion Of Unfinished Construction And Assembly Works: Reconstruction Of The Basement Rooms Of The School Complex Building In Lipusz (Record No. 310/10, Lipusz District) And Adaptation Of Them Into A New Place For Active Leisure. (Guaranteed Part) General Construction Works Consist In The Reconstruction And Renovation Of Rooms In The Scope Of: 1. External Stairs: - Installation Of A Powder-Coated Steel Balustrade Filled With Glass, - Installation Of A Powder-Coated Steel Handrail On Brackets. 2. Water Supply Installation: - Installation Of Standing Washbasin Faucets With A Nominal Diameter Of 15 Mm.3. Room Heating: - Installation Of Double-Plate Steel Radiators With A Height Of 600-900 Mm And A Length Of Up To 1600Mm, - Installation Of Radiator Valves With A Diameter Of Nominal 15 Mm - Thermostatic Straight, - Installation Of Thermostatic Heads For Thermostatic Radiator Valves - With Protection For Public Places, Reinforced, Vandal-Proof, With A Liquid Sensor, 8-26 Degrees.4. Mechanical Ventilation Installation: - Installation Of Duct Fans, - Installation Of Circular Roof Air Intakes Or Exhaust Outlets Type C For Ducts With A Diameter Of Up To 315 Mm, - Activation Of The Ventilation System, 5. Electrical And Telecommunications Industry: - Assembly Of Lighting Fixtures On A Ready-Made Surface With Connection, Ordinary Screw-On End Fittings (20W Led Fitting, Ip44, Dali), - Assembly Of Lighting Fittings On A Ready-Made Surface With Connection, Ordinary Screw-On End Fittings (Led Fitting 20W, Ip44), - Assembly Of Lighting Fittings On A Ready-Made Surface With Connection, Ordinary Screw-On End Fittings (Led Fitting 35W, Ip44, Dali),- Installation Of Lighting Fixtures On A Ready-Made Surface With Connection, Ordinary Screw-On End Fittings (35W Led Fitting, Ip44),- Assembly Of Lighting Fittings On A Ready-Made Surface With Connection, Ordinary Screw-On End Fittings (Led Fitting 63W, Ip44),- Installation Of Lighting Fittings On A Ready-Made Surface With Connection, Ordinary Screw-On End Fittings (Led Fitting 35W, 120Cm, Ip44), - Installation Of Lighting Fixtures On A Ready-Made Surface With Connection, Ordinary Screw-On End Fittings (Emergency Led Fitting With A Pictogram, Ip20), - Assembly Of Lighting Fittings On A Ready-Made Surface With Connection, Ordinary Screw-On End Fittings (Emergency Led Fitting, Universal Installation, Corridor), - Assembly Of Lighting Fittings On A Ready-Made Surface With Connection, Ordinary Screwed End Fittings (Emergency Led Luminaire, Universal Installation, Open Zone), - Installation Of Electrical Devices Weighing Up To 2.5 Kg (Motion And Presence Sensor With Dali Control), - Installation Of Electrical Devices Weighing Up To 2.5 Kg (Motion And Presence Sensor With Control), - Installation Of Electrical Devices Weighing Up To 10 Kg, - Call Installation In The Toilet For The Disabled: Signaling Device, Power Transformer, Reset Button, 2 Call Buttons, Cabling, - Installation Of Flush-Mounted, Single, 2-Pole, Straight-Thro
|
