|
1.1. Glue Vk-3 Ost 1 90281-86 Is Intended For Gluing Metals And Non-Metallic Materials, Including Honeycomb Structures, As Well As For The Production Of Film Phenolic Rubber Adhesive Of The Same Brand. Operating Temperature Range From Minus 60 To Plus 80 0C. 2. Requirements For The Supplied Goods Name Parameter Appearance Viscous Liquid From Gray To Light Brown Color Without Foreign Impurities Or Lumps Viability, H 6-24 Ultimate Shear Strength Of Adhesive Joints Made Of Clad Aluminum Alloy D16at, Mpa At A Temperature Of 20 °C 16.66 At A Temperature Of 80 °C 10.78 2.1. The Glue Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. Vk-3 Glue Must Be Category 1, Produced In The Manufacturer’S Packaging, Ensuring Tightness And Safety In Any Climatic Conditions, With Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate). The Container Must Be Without Any Deformations Or Abrasions. The Shelf Life Of The Product Should Be No More Than 20% Of The Assigned Shelf Life. Metal Containers For Pouring Containers., 1.1 Transistors 2T610b Silicon Epitaxial-Planar Structures N-P-N Microwave, Amplifying. Designed For Use In Voltage And Power Amplifiers. Used To Work In Special-Purpose Electronic Equipment. Available In A Metal-Ceramic Housing With Flexible Strip Leads. They Are Marked With A Alphanumeric Code On The Transistor Body. The Type Of Device Is Indicated On The Label. The Mass Of The Transistor Is No More Than 2.0 G. Case Type: Kt-16-2. Type Of Climatic Modification: “Uhl”. Quality Category: “Vp”, “Osm”. Specifications: - Acceptance Of “Vp” Ya53.365.009Tu; - Acceptance Of “Osm” Ya53.365.009Tu, P0.070.052. Foreign Equivalent: 2Sc3596c. The Guaranteed Shelf Life Of Transistors Is 25 Years From The Date Of Acceptance, And In Case Of Rechecking Of The Product - From The Date Of Rechecking. Warranty Time: - 25,000 Hours - In All Modes Allowed By The Specifications; - 40,000 Hours - In Light Mode. Warranty Operating Time Is Calculated Within The Warranty Storage Period. 1.2. Main Technical Characteristics Of The 2T610b Transistor: Transistor Structure: N-P-N; Pk Max - Constant Collector Power Dissipation: 1.5 W; Fgr - Cutoff Frequency Of The Transistor Current Transfer Coefficient For A Circuit With A Common Emitter: Not Less Than 700 Mhz; Ukbo Max - Maximum Collector-Base Voltage At A Given Collector Reverse Current And Emitter Open Circuit: 26 V; Uebo Max - Maximum Emitter-Base Voltage At A Given Reverse Emitter Current And Open Collector Circuit: 4 V; Iк Max - Maximum Permissible Direct Collector Current: 300 Ma; Ikbo - Reverse Collector Current - Current Through The Collector Junction At A Given Reverse Collector-Base Voltage And Open Emitter Terminal: No More Than 0.5 Ma (26V); H21e - Static Current Transfer Coefficient Of The Transistor For Circuits With A Common Emitter: 20...250; Ск - Collector Junction Capacitance: No More Than 4.1 Pf; Ksh - Transistor Noise Figure: No More Than 2 Db At A Frequency Of 200 Mhz;, 1.1. Heat-Shrinkable Tubes With A Diameter Of 3 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break Not Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1.1. Heat-Shrinkable Tubes With A Diameter Of 15.8 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break Not Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1.1. Sealing Mastic Gost 18680-73 Is Used For Sealing Devices, Components And Assemblies For Sealing Control Sockets Of Radio-Electronic Equipment, Units Of Electrical Machines, Household Appliances, Etc. 2. Requirements For The Supplied Goods. 2.1. Mastic Is Made On The Basis Of Petroleum Bitumen, Plasticizing Resin And Mineral Filler. In Mastics It Is Used In A Form Heated To A Plastic State. The Softening Temperature Of Bitumen Mastics Is From 70 To 800C. Heated Bitumen Sealing Mastic Is Poured Into The Sealing Areas And The Stamp Is Pressed. The Operating Temperature Range Of The Mastic Is From -60 To +1000C. 2.2. The Mastic Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., Capacitor K52 Oxide-Electrolytic Volumetric Porous Tantalum Polar. Compact, In A Cup Metal Case With Multi-Directional Wire Leads. Designed To Work In Dc And Pulsating Current Circuits. Used In Special-Purpose Equipment Operating In Harsh Conditions And Requiring Increased Stability Of Electrical Parameters. Manufactured In All-Climate Versions And In Versions For Moderate And Cold Climates. Quality Category: “Vp”, “Os”. Technical Conditions: Acceptance “5” Ozh0.464.049 Tu; Acceptance “9” Ozh0.464.049 Tu, Ozh0.464.200 Tu. Main Technical Parameters Of The K52-2 Unit: Nominal Capacity 10. 1000 Μf; Nominal Voltage 6; 15; 25; 50; 70; 90 V; Permissible Deviations Of Capacity. ±10; ±20; ±30; +50/-20%; - Loss Tangent. 2.30 Leakage Current 7.0. 60.0 Μa; Relative Air Humidity At A Temperature Of +35 C 98%; Operating Temperature Range -60 +155 C; Minimum Operating Time, Not Less Than . 10000 H; Shelf Life, Not Less Than .15 L; Weight, No More Than 22.0 G. Explanation Of The Abbreviated Designation Of An Oxide-Electrolytic Tantalum Volumetric Porous Capacitor: K52-2 25 V 30 Uf Only For Defense Products - The Absence Of A Letter Indicates The Quality Category “Vp”, The Presence Of The Letters “Osd”, “Osm”, “Os” Indicates The Corresponding Quality Category; K - Letter Denoting A Subclass Of Capacitors, Where K - Constant Capacitance Capacitors; 52 - Number, Indicates The Group Of Technological Design, Where 52 - Oxide-Electrolytic Tantalum Volumetric Porous Capacitors; 2 - Digit, Determines The Serial Number Of The Design Development Of A Specific Type Of Capacitor; 25 V - Designation Of The Rated Voltage Of The Capacitor In Volts; 30 Μf - Designation Of The Nominal Capacitance Of The Condenser In Microfarads. Example Of Full Designation When Ordering: Capacitor Bm-2-200-4700Pf±10% 2.1. Capacitors Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner., Capacitor K52 Oxide-Electrolytic Volumetric Porous Tantalum Polar. Compact, In A Cup Metal Case With Multi-Directional Wire Leads. Designed To Work In Dc And Pulsating Current Circuits. Used In Special-Purpose Equipment Operating In Harsh Conditions And Requiring Increased Stability Of Electrical Parameters. Manufactured In All-Climate Versions And In Versions For Moderate And Cold Climates. Quality Category: “Vp”, “Os”. Technical Conditions: Acceptance “5” Ozh0.464.049 Tu; Acceptance “9” Ozh0.464.049 Tu, Ozh0.464.200 Tu. Main Technical Parameters Of The K52-2 Unit: Nominal Capacity 10. 1000 Μf; Nominal Voltage 6; 15; 25; 50; 70; 90 V; Permissible Deviations Of Capacity. ±10; ±20; ±30; +50/-20%; - Loss Tangent. 2.30 Leakage Current 7.0. 60.0 Μa; Relative Air Humidity At A Temperature Of +35 C 98%; Operating Temperature Range -60 +155 C; Minimum Operating Time, Not Less Than . 10000 H; Shelf Life, Not Less Than .15 L; Weight, No More Than 22.0 G. Explanation Of The Abbreviated Designation Of An Oxide-Electrolytic Tantalum Volumetric Porous Capacitor: K52-2 25 V 30 Uf Only For Defense Products - The Absence Of A Letter Indicates The Quality Category “Vp”, The Presence Of The Letters “Osd”, “Osm”, “Os” Indicates The Corresponding Quality Category; K - Letter Denoting A Subclass Of Capacitors, Where K - Constant Capacitance Capacitors; 52 - Number, Indicates The Group Of Technological Design, Where 52 - Oxide-Electrolytic Tantalum Volumetric Porous Capacitors; 2 - Digit, Determines The Serial Number Of The Design Development Of A Specific Type Of Capacitor; 25 V - Designation Of The Rated Voltage Of The Capacitor In Volts; 30 Μf - Designation Of The Nominal Capacitance Of The Condenser In Microfarads. Example Of Full Designation When Ordering: Capacitor; K52-1-70-47 2.1. Capacitors Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner., 1. Description Of The Product 1.1. The 6Lr61 Battery Is An Alkaline (Alkaline) Battery With A Voltage Of 9V. 6Lr61 Batteries Are Used To Power Devices With Low And Constant Power Consumption - Alarm Clocks, Microphones, Remote Controls For Television And Audio Systems, Etc. The Batteries Are Packed In A Blister, 1 Piece Each. Name Parameter Size Crown, 6F22, 6Lr61, E, Pp3 Voltage, V 9 Chemical Composition Of Manganese-Zinc Alkaline (Zn-Mno2) Height, Mm 48.5 Weight, G 46.0 Blister Packaging Type Quantity Per Package, Pcs. 1 Capacity, Mah 565 Waterproof Housing Yes Overall Dimensions, Mm 25.5X16.5X47.5 Service Life, G 3 Warranty Period, G 1 2. Requirements For The Supplied Goods 2.1. The Power Battery Must Be Manufactured In Accordance With The Requirements Of Established Standards, According To Technological Regulations Approved In The Prescribed Manner. 2.2. The Product Must Be Category 1, Supplied In The Manufacturers Packaging, Ensuring Tightness And Safety, With Accompanying Documents Confirming The Origin Of The Product (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture)., 1.1. Heat-Shrinkable Tubes With A Diameter Of 6.4 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break Not Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1.1. Heat-Shrinkable Tubes With A Diameter Of 4.8 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break Not Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1.1. Heat-Shrinkable Tubes With A Diameter Of 5 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break Not Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., Transistors 2T803a Are Intended For Use In Stabilizers And Voltage Converters, Pulse Modulators. The Case Is Metal With Glass Insulators And Rigid Leads. The Mass Of The Transistor Without A Cap Flange Is No More Than 22 G. The Weight Of The Slip-On Flange Is No More Than 12 G. Case Type: Ktyu-3-20. Technical Specifications: Ge3.365.007 Tu. Transistors 2T803a Silicon Mesaplanar Powerful N-P-N Switching Structures. Basic Technical Characteristics Of Transistor 2T803a: Transistor Structure: N-P-N; H21e - Static Current Transfer Coefficient, (Uke=10V, Ik=5A): No Less Than 18, No More Than 80. Iker - Reverse Collector-Emitter Current (Uce=60V, Reb=100 Ohm): No More Than 5 Ma. Ieb0 - Emitter Reverse Current (Ueb = 4 V): No More Than 20 Ma. Ukenas - Collector-Emitter Saturation Voltage (Ic=5A, Ib=1A): No More Than 2.5V. U21e 2 - Statistical Slope Of Direct Transmission, (Uke=10V, Ik=5A): At Least 2 A/V H21e - Current Transfer Coefficient Module (Uke=10V, Ik=0.5A, F=10Mhz): At Least 2. Uke Max - Maximum Permissible Dc Collector-Emitter Voltage: 60V. Uebmax - Maximum Permissible Emitter-Base Blocking Voltage: 4 V. Uce And Max - Max Permissible Collector-Emitter Pulse Voltage, (At Rbe≤1Kohm, Τi≤10Μs, Q≥2): 80 V Pσ Max - Maximum Permissible Total Power Dissipation: 60 W Ik Max - Maximum Permissible Direct Collector Current: 10 A. Tper. Max - Maximum Permissible Transition Temperature - 150 ºс. Tcorp.Max - Maximum Permissible Case Temperature - 125 ºс. 2. Requirements For The Supplied Goods. 2.1. Transistors Must Be Manufactured In Accordance With The Requirements Of Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. Transistors Must Be Category 1, Supplied In Manufacturers Packaging, Ensuring Tightness And Safety, With Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture)., 1.1. Moisture-Resistant Paper Sandpaper Is Designed For Abrasive Processing Of Various Materials With And Without The Use Of Cutting Fluid. Moisture-Resistant Paper Sandpaper Must Comply With Gost 10054-82. Supplied In Sheets 30X30 Cm. Brand No. 240 Sheets Width, Mm (Limit Deviation ±2.0) Length, Mm (Limit Deviation ±5.0) 140; 230 320; 280; 310 280 310 320 320 Must Be Made With 16-M14 Grit From Grinding Materials: Type Of Abrasive Brand Of Abrasive Normal Electrocorundum 15A; 14A; 13A Green Silicon Carbide 64C; 63С Black Silicon Carbide 54C; 53C; 51C Sanding Paper Base: Name Of Paper Symbol Wet-Resistant M Water-Resistant With Polymer Latex Coating L1; L2 The Abrasive Material Must Be Firmly Bonded To The Base With Varnishes Of The Yan-153 And Pf-587 Grades According To Industry Normative And Technical Documentation. The Number Of Sheets Must Correspond To No. 100-8 M2; No. 240-8 M2; 320-8 M2. Sanding Sheets Should Be Packed In Packs Of (50±1) Pieces. Or (100±2) Pcs. The Packs Are Sealed With Paper Or Paper Sanding Tape With A Grain Size Of 10 Or Less, With A Width Of At Least 30 Mm Across The Width Of The Sheets., 1.1. Moisture-Resistant Paper Sandpaper Is Designed For Abrasive Processing Of Various Materials With And Without The Use Of Cutting Fluid. Moisture-Resistant Paper Sandpaper Must Comply With Gost 10054-82. Supplied In Sheets 30X30 Cm. Brand No. 100 Sheets Width, Mm (Limit Deviation ±2.0) Length, Mm (Limit Deviation ±5.0) 140; 230 320; 280; 310 280 310 320 320 Must Be Made With 16-M14 Grit From Grinding Materials: Type Of Abrasive Brand Of Abrasive Normal Electrocorundum 15A; 14A; 13A Green Silicon Carbide 64C; 63С Black Silicon Carbide 54C; 53C; 51C Sanding Paper Base: Name Of Paper Symbol Wet-Resistant M Water-Resistant With Polymer Latex Coating L1; L2 The Abrasive Material Must Be Firmly Bonded To The Base With Varnishes Of The Yan-153 And Pf-587 Grades According To Industry Normative And Technical Documentation. The Number Of Sheets Must Correspond To No. 100-8 M2; No. 240-8 M2; 320-8 M2. Sanding Sheets Should Be Packed In Packs Of (50±1) Pieces. Or (100±2) Pcs. The Packs Are Sealed With Paper Or Paper Sanding Tape With A Grain Size Of 10 Or Less, With A Width Of At Least 30 Mm Across The Width Of The Sheets., 1.1. Electric Brushes Po-750A-2S Are Designed For Transmitting Electricity In Moving Mechanisms. The Unit On Which It Is Installed Is The Converter Po-750A 555.119 Brush Brand – Mgs-8 Drawing Number – 555.119 Size – 8X16x23 Number Of Brushes In A Group – 1 Number Of Groups In The Product – 4 2. Requirements For The Supplied Goods 2.1. Electric Brushes Must Be Category 1 And Must Not Have Mechanical Damage, Chips, Scratches, Or Traces Of Oxidation On The Terminals. Each Brush Should Be Wrapped In Paper. The Supplied Batch Must Have Accompanying Documents (Passports Or Labels, Quality Certificate) Confirming The Origin Of The Goods., Transistors 2T808a Are Intended For Use In Stabilizers And Voltage Converters, Pulse Modulators. The Case Is Metal With Glass Insulators And Rigid Leads. The Mass Of The Transistor Without A Cap Flange Is No More Than 22 G. The Weight Of The Slip-On Flange Is No More Than 12 G. Case Type: Ktyu-3-20. Technical Specifications: Ge3.365.007 Tu. Transistors 2T808a Silicon Mesaplanar Powerful N-P-N Switching Structures. Basic Technical Characteristics Of The 2T808a Transistor: Transistor Structure: N-P-N; H21e - Static Current Transfer Coefficient, (Uke=3V, Ik=6A): Not Less Than 10, Not More Than 50. Iker - Reverse Collector-Emitter Current (Uce=200V, Reb=10 Ohm): No More Than 3 Ma. Ieb0 - Emitter Reverse Current (Ueb = 4 V): No More Than 50 Ma. Ubenas - Base-Emitter Saturation Voltage (Ic=6A, Ib=0.6A): No More Than 2.5 V. H21e - Current Transfer Coefficient Module At Frequency F=3 Mhz (Uke=10V, Ik=0.5A): Not Less Than 2.5. Sc – Collector Junction Capacitance (Ukb=10V, F=1 Mhz): No More Than 500 Pf. Tras – Resorption Time (Ic=6A, Uc=15V, Ibs=Ibzap=2 A): No More Than 2 Ns. Uke Max - Maximum Permissible Constant Collector-Emitter Voltage (Reb=10 Ohm): 120 V. Ueb Max - Maximum Permissible Emitter-Base Blocking Voltage: 4 V Uke And Max - The Maximum Permissible Collector-Emitter Pulse Voltage (With A Blocking Voltage Ueb = 2 V Or Reb = 10 Ohm): 250 V. Iк Max - Maximum Permissible Direct Collector Current: 10 A. Ib Max - Maximum Permissible Base Current: 4 A. Rk Max - Maximum Permissible Constant Dissipated Power Of The Collector: 50 W. Tper. Max - Maximum Permissible Transition Temperature: 150 ºс. Tcase.Max - Maximum Permissible Case Temperature: 125 ºс. Transistors Must Be Manufactured In Accordance With The Requirements Of Established Standards According To Technological Regulations, Transistors Must Be Category 1, Supplied In Manufacturers Packaging That Ensures Tightness And Safety, Accompanied By Accompanying Documents Confirming The Origin Of The Goods, 1.1. Heat-Shrinkable Tubes With A Diameter Of 19.0 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break Not Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1. Product Description 1.1. Heat-Shrinkable Tubes With A Diameter Of 4 Mm Radplast-T2 Must Comply With Tu 6-19-299-2010, Used For Insulating Electrical Connectors And Connections Of Power Cables, Wires And Communication Cables, Sealing And Insulating Wire Connections, Creating A Protective Coating From Mechanical And Chemical Influences, Phasing, Bundling And Marking Of Wires, Repairing Damaged Insulation And Sheathing Of Cables And Wires, Connection And Repair Oil And Gas Pipelines, Creation Of Decorative And Protective Coatings. 2. Requirements For The Supplied Goods. 2.1. The Tube Material Does Not Support Combustion And Has A Low Smoke Emission Index “Ng-Ls”. Tnt Heat-Shrinkable Tubes Are Particularly Elastic And Shrink At Lower Temperatures. Main Parameters: Delivery Form: Cut In 1 M Tubes Shrinkage Ratio 2:1 Material Polyolefin, Halogen-Free Colors Black, White, Red, Blue, Yellow, Green, Yellow-Green Specifications Elongation At Break Not Less Than 300% Shrinkage Temperature 130°C To 150°C Operating Temperature (With Flame Suppression) -60°C To +135°C Operating Temperature (Without Combustion Suppression) From -60°С To +60°С Tensile Strength Not Less Than 12 Mpa Electric Strength Not Less Than 15 Kv/Mm Operating Voltage Up To 600 V Specific Volumetric Electrical Resistance 1014 Ohm/Cm 2.2. Heat-Shrinkable Tubes Must Be Category 1, Accompanied By Accompanying Documents (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture And Quality Certificate)., 1.1. Moisture-Resistant Paper Sandpaper Is Designed For Abrasive Processing Of Various Materials With And Without The Use Of Cutting Fluid. Moisture-Resistant Paper Sandpaper Must Comply With Gost 10054-82. Supplied In Sheets 30X30 Cm. Brand No. 320 Sheets Width, Mm (Limit Deviation ±2.0) Length, Mm (Limit Deviation ±5.0) 140; 230 320; 280; 310 280 310 320 320 Must Be Made With 16-M14 Grit From Grinding Materials: Type Of Abrasive Brand Of Abrasive Normal Electrocorundum 15A; 14A; 13A Green Silicon Carbide 64C; 63С Black Silicon Carbide 54C; 53C; 51C Sanding Paper Base: Name Of Paper Symbol Wet-Resistant M Water-Resistant With Polymer Latex Coating L1; L2 The Abrasive Material Must Be Firmly Bonded To The Base With Varnishes Of The Yan-153 And Pf-587 Grades According To Industry Normative And Technical Documentation. The Number Of Sheets Must Correspond To No. 100-8 M2; No. 240-8 M2; 320-8 M2. Sanding Sheets Should Be Packed In Packs Of (50±1) Pieces. Or (100±2) Pcs. The Packs Are Sealed With Paper Or Paper Sanding Tape With A Grain Size Of 10 Or Less, With A Width Of At Least 30 Mm Across The Width Of The Sheets., 1.1. Epoxy Adhesive 88P (Glue 88 Np) Is Used For Cold Gluing Of Rubbers Based On General Purpose Rubbers To Metal, Including Painted Surfaces, Glass, Wood And Other Materials, And Is Also Used For Gluing Rubber To Rubber. Products Glued With 88P Glue Are Operational At Temperatures From -500C To +700C. Products Glued With 88P Glue (With Sealed Ends And Edges) Can Be Used In Sea And Fresh Water. Glue 88P Does Not Cause Corrosion Of Steel And Aluminum Alloys. Adhesive 88P Is Made On The Basis Of Rubbers Nk, Skn, Skb, Sks, Skms, And Nayrite. Name Of Indicator Norm According To Gost (Tu 38.105540-85) Exposure Time From 5 Minutes To 2 Hours Complete Curing Time, H 24 Viscosity V3-246, C Not Less Than 45 Number Of Layers 1-2 Shelf Life, L 5 Packaging, L 20 2. Requirements For The Supplied Goods 2.1. The Glue Must Be Manufactured In Accordance With Established Standards According To Technological Regulations Approved In The Prescribed Manner. 2.2. The Glue Must Be Category 1, Produced In The Manufacturers Packaging, Ensuring Tightness And Safety In Any Climatic Conditions, Accompanied By Accompanying Documents Confirming The Origin Of The Goods (Labels, Passports Indicating The Product Nomenclature, Batch, Date, Year Of Manufacture, As Well As A Quality Certificate). The Container Must Be Without Any Deformations Or Abrasions. The Shelf Life Of The Product Should Be No More Than 20% Of The Designated Shelf Life.
|
