|
1.1. - Supply And Placement Of Construction Sign Made Of Galvanized Sheet 26, Esp. 0.45Mm, Dimension (3X1.5)M, Plotted With Vinyl Adhesive, Affixed With Rivets. 4, 8X40mm, In 20X20mm Metal Structure, Special. 1.25Mm, Including Support In Autoclaved Eucalyptus Painted With Pva Paint Two (2) Coats, 1.2 - Manual Excavation Of Trench With A Depth Of Less Than 1.5M, Including Side Discharge, 1.3 - Preparation Of The Bottom Of A Trench With A Width Of Less Than 1.5 M., 1.4 - Manual Backfilling Of Trenches, With Compactor Of Percussion Solos. Af_08/2023, 1.5 - Regularization And Compaction Of Subgrade Of Predominantly Sandy Soil, For Pavement Deconstruction Works. Af_09/2024, 2.1.1 - Lean Concrete Ballast, Applied To Floors, Slabs On Ground Or Radiators. Af_01/2024, 2.1.2 - Formwork And Stripping Of Board And Batten, Reuse (3X), Excluding Shoring, 2.1.3 - Cutting And Bending Of Ca-50 Steel, Diameter Of 8.0 Mm. Af_06/2022, 2.1.4 - Cutting And Bending Of Ca-60 Steel, Diameter 5, 2.1.5 - Concrete Fck 25Mpa, Ratio 1:2, 3:2, 7 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With Concrete Mixer 600 L. Af_05/2021, 2.2.1 - Slim Concrete Ballast, 2.2.2 - Board And Batten Formwork And Shaping, 2.2.3 - Ca-50 Steel Cutting And Bending, 2.2.4 - Ca-60 Steel Cutting And Bending, 2.2.5 - Fck 25Mpa Concrete, 3.1.1 - Ca-50 Steel Cutting And Bending, 3.1.2 - Cutting And Bending Of Ca-60 Steel, 3.1.3 - Fck 25Mpa Concrete, 3.2.1 - Cutting And Bending Of Ca-50 Steel, 3.2.2 - Cutting And Bending Of Ca-60 Steel, 3.2.3 - Fck 25Mpa Concrete, 3.2.4 - Precast Slab D 8 Cm, Concrete 1:2:4 With Resin Eform Frame, 3.2.5 - Supporting For Pre-Cast Slab With Metal Shoring, Type A, Height From (200 To 310)Cm, Inclusive, 3.2.6 - Ca-60 Steel Mesh Reinforcement, Welded Type Q-92, Diameter Ø4, 2Mm, Weft With Dimension (150X150)Mm, , 4.1 - Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, 5.1 - Fence Masonry Made Of Horizontally Drilled Ceramic Blocks Of 9X14x19 Cm (Thickness 9 Cm) And Laying Mortar With Manual Preparation. Af_12/2021., 5.2 - In Situ Cast Concrete Lintel, 20 Cm Thick. Af_03/2024, 5.3 - Framed In Situ In Concrete, 20 Cm Thick. Af_03/202, 5.4 - Chapisco Applied To Masonry (With The Presence Of Gaps) And Concrete Facade Structures, Using A Trowel. Mortar Trace 1:3 With Manual Preparation. Af_10/2022, 5.5 - Single Putty, In 1:2:8 Mortar Mix, Mechanical Preparation, Manually Applied On Internal Walls Of Rooms With An Area Between 5M² And 10M², And 17.5Mm, With Taliscas. Af_03/2024, 5.6 - Premium Acrylic Latex Paint, Manual Application On Walls, Two Coats. Af_04/2023, 5.7 - Acrylic Sealer Base, Manual Application To Wall, One Coat. Af_04/2023, 5.8 - Ceramic Coating For Internal Walls With Enamelled Plates Of Dimensions 60X60 Cm Applied To The Entire Height Of The Walls. Af_02/2023_Pe, 6.1 - Supply Of Metallic Structure And Metallic Framing, In Steel, For Roof, Excluding Tile, Including Manufacturing, Transport, Assembly And Application Of Anticorrosive Preparation Base On Metallic Surface, One (1) Coat, 6.2 - Covering In Trapezoidal Galvanized Metallic Tile, Simple Type, 50Mm, Natural Finish, Including Accessories For Fixing, Supply And Installation., 7.1 - Beaded Wooden Door Kit, Semi-Hollow (Light Or Medium), Medium Standard, 80X210cm, Thickness 3.5Cm, Items Included: Hinges, Assembly And Stopper Installation, Without Lock -Supply And Installation. Af_12/
|
