|
Countertop With Cuba. The Bench With The Sink Must Be Made Of Stainless Steel Or Equivalent Material With A Brushed Finish, Which May Be Aisi 430, 304 Or 316, Depending On The Technical Specification And Environment Of Use. The Top Must Have A Minimum Thickness Of 0.8 Mm, With Folded Edges And Lower Reinforcement For Greater Resistance, Supporting A Distributed Load Of Up To 100 Kg. The Basin Must Be Integrated Or Welded To The Top, With Minimum Standard Dimensions Of 50 Cm (Length) X 40 Cm (Width) X 30 Cm (Depth), And A Polished Internal Finish. The Structure May Include Metal Tube Feet With Adjustable Leveling Shoes, Rear Mirror For Liquid Containment And Water Rim For Retention. The Bench Must Contain A Flat Or Fenestrated Lower Shelf With A Minimum Capacity Of 60 Kg Distributed. The Minimum Total Dimensions Must Be Approximately 180 Cm Long, 60 To 70 Cm Wide And 90 Cm High. The Product Can Be Delivered Assembled Or Disassembled, With Assembly Manual In, Auxiliary Cart. The Auxiliary Carriage Must Be Made With A Tubular Structure In Stainless Steel Aisi 430, 201 Or Equivalent, With A Polished Finish And Folded Edges For Safety. It Must Have At Least Three Flat Shelves Made Of Stainless Steel Sheet With A Minimum Thickness Of 0.80 Mm, All Equipped With Lateral Containment Edges Or Gratings. The Structure Must Include Front Or Double Side Handle Made Of Stainless Steel Tube And Rubber Bumpers On The Four Corners, When Applicable. The Equipment Must Be Mounted On Four 3” Or 4” Polypropylene Swivel Casters, At Least Two Of Which Have A Diagonal Braking System Or Individual Locks. The Base May Include Leveling Shoes To Adjust Stability. The Minimum Required Load Capacity Is 60 Kg Per Shelf, Which Can Reach Up To 80 Kg. The Minimum External Dimensions Must Be In The Range Of 85 Cm To 105 Cm In Height, 45 Cm To 60 Cm In Width And 90 Cm To 100 Cm In Length. The Product Must Be Delivered Assembled, With Finish, Plastic Container. The Plastic Container Must Be Made Of High Density Polyethylene (Hdpe), With Uv Additive For Protection Against Ultraviolet Rays And Resistance To External Use. The Lid Must Be Articulated To The Body, With A Front Pedal Opening System, And May Include A Shock Absorber To Reduce Impact And Noise. The Pedal Must Be Integrated Into The Drive System And Can Be Made From Painted Or Galvanized Carbon Steel. The Structure Must Include Side Trunnions For Tipping Into Mechanized Collection Equipment, A Lower Drain For Draining Liquids And A Washable Surface With Rounded Internal Corners To Facilitate Cleaning. The Container Must Be Mounted On Four 8 Rubber Swivel Wheels, With A Turning Angle Of 360°, Two Of Which Have A Braking Or Parking System. The Volumetric Capacity Must Be At Least 660 Liters, With A Minimum Nominal Load Of 264 Kg. The Minimum Dimensions Must Be In The Range Of 1380 Mm Wide, 772 Mm D, Industrial Hood. The Industrial Hood Must Be Made Of Aisi 430 Or Aisi 304 Stainless Steel, With A Brushed Or Polished Finish, Ensuring High Resistance To Corrosion, Ease Of Cleaning And Durability In Intensive Cooking Environments. Tig Process. The Minimum Dimensions Required Are 200 Cm Wide, 95 Cm Deep And 45 Cm High.
|
