|
Portable Fire Extinguisher, With 6 Kg Capacity: In Compliance With Abnt Nbr 15808, For Application In Class Abc Fires, Containing Dry Chemical Powder (Pqs)., For Application In Class Bc Fires, Wall Support – For Installation Of Portable Fire Extinguisher, With 6 Kg Capacity, Powder Chemical., Portable Potable Water Fire Extinguisher, With Nominal Capacity Of 10 Liters: Manufactured In Compliance With Brazilian Standards (Abnt Nbr 15808), Including Nitrogen Propellant Gas, Designed Specifically To Fight Class A Fires, With Wall Mounting Bracket And Inmetro Seal., Portable Co2 Extinguisher, For Application In Fires., 09/02/2026 - 17:24:09, Recharging And Maintenance Of 2 Level Portable Fire Extinguisher, With A Capacity Of 4 Kg: In Compliance With Abnt Nbr 15808, For Application In Class A, B And C Fires, Containing Dry Chemical Powder (Pqs), Accompanied By Installation, Support Wall Mounting And Inmetro Seal, Recharging And Maintenance Of 2Nd Level Of Portable Fire Extinguisher, With A Capacity Of 6 Kg Bc: With Us Monoammonium Phosphate Extinguisher (Nh₄h₂po₄), With Minimum Concentration Of 55%, For Fire Classes Bc, Following Abnt Standards (Nbr 12962, 11716) And Inmetro, With Extinguishing Capacity Tests Indicated By Numbers And Letters., Recharging And 2Nd Level Maintenance Of Fire Extinguishers Using Potable Water As Extinguishing Agent And Nitrogen As Propelene Gas: The Water Must Be Of Certified Quality To Ensure That There Are No Impurities That Could Damage The Equipment Or Impair Performance. Recharging And Maintenance When Necessary Of Water Extinguishers Must Be Carried Out Annually, Or Immediately After Any Use, Even Partial. The Entire Process Must Comply With Abnt Nbr 12962, Which Establishes The Requirements For Inspection, Maintenance And Recharging Of Fire Extinguishers. Abnt Nbr 15808 Must Also Be Followed, Which Also Defines The Specifications For Portable Fire Extinguishers. Follow The Abnt Nbr 13434-2 Standards And The Technical Instructions Of The State Fire Department, With A Red Background And A White Pictogram (Extinguisher Symbol) Indicating “Abc Powder”, Made Of Self-Extinguishing Pvc And With Light Intensity Requirements, Ensuring Visibility And Legal Compliance., Fire Extinguisher Signaling Board Drinking Water And Gas Propellant: When Measuring, They Must Have Photoluminescent Signage (Which Glows In The Dark); Follow The Abnt Nbr 13434 And Nbr 16820 Standards, In Addition To The Technical Instructions From The State Fire Department. It Must Be Made Of Self-Extinguishing Material (Does Not Spread Flames), Such As 2Mm Expanded Pvc, Measuring At Least 20Cmx15cm. With Double Sided Tape Ready For Installation., Ground Supports - Floor Support For Fire Extinguisher Tripod Model In Carbon Steel With Rubberized Feet For Fire Extinguisher Ap10l., Photoluminescent Signaling Plate Measuring Minimum 20X15cm, In Pvc, 2Mm, For Escape Route Identification Model S1 In Compliance With Requirements Required By The Fire Department And Nbr 13434-2. Ready For Installation With Double Sided Tape, For Identification Of Escape Route Model S2 In Compliance With Requirements Demanded By The Fire Department And Nbr 13434-2. Ready For Installation With Double Sided Tape, Emergency Light
|
