Repair Work Of Unit 184 - Rig Career 184, Dismantling The Mast Jack By Cutting The Nuts And Bolts With A Gas ... in India

Work Detail

Repair Work Of Unit 184 - Rig Career 184, Dismantling the mast jack by cutting the nuts and bolts with a gas cutter and using a crane. Removing it from the mast, repairing it, and fitting it to the crane. Jack repair work Dismantling the jack, installing a new oil seal, polishing the jack rod, sizing it, testing it, and refitting it. Pressure testing for leaks. Dismantling the rotary motor, removing the old gasket, and fitting a new gasket. Inserting a new seal and ring for the hydraulic motor. 184 Compressor truck repair Repairing four cracks in the compressor truck frame by welding an extra support. Fabricating a heavy-duty mild steel ladder and welding it to the compressor truck frame. Removing the motor hub bolt and threading it back in, fitting a new bolt. Repairing the drilling rod lifting system. Making and welding and turning the collar of the motor sub. Making a new bush and fitting the shaft's grape bolt. Welding and fitting a new 25 mm and 16 mm plate for the road carrier. New 30 mm and 9 inch pins for the new carrier. Making Turning a 25 mm plate on a lathe, making a new spanner for the drilling rod. Making a new tool for removing the drilling rod. 184 Drilling truck and rig Filling the drilling rod removal tool with material, welding it, turning it, and repairing it by removing the band. Making a new drilling rod removal tool. Dismantling and welding the gear shaft of the rotary motor of the drilling machine. Boring and repairing it on the lathe machine. Refurbishing the ring accelerator of the drilling machine. Turning, welding, and fitting the relay air line shaft on the lathe. Making a new air line shaft with a 70 mm OD and 250 mm length. Refurbishing the rig's accelerator system. Welding and fitting the lever rest pipe. Welding angles to drilling stand and fitting them. Removing bends, repairing and refitting them.

Contact Information