Tender For Repair And Maintenance Of Furniture Items Of 14 Asc Af Under Age I R D Kochi - Removing The Worn ... in India

Work Detail

Tender For Repair And Maintenance Of Furniture Items Of 14 Asc Af Under Age I R D Kochi - Removing the worn out unserviceable plastic cane from the furniture items & in the existing holes at equal distance of 12.5mm from centre to centre and carry out recanning as per Godrej pattern, using white/ coloured, having2.00mm minimum width and 0.4mm thick for chairs except chair varandhah for chair verandah 4mm width and 0.6mm thick half round, gola type weighing not less than 6 gms per running mtr including making provision of an additional strand, ie. total 3 strands, in place of two for the centre holes, when the total span of caning work exceeds 350mm all as specified and as directed by Engineer-in-Charge for the following furniture items :- (FD-75 (M)) 2 Chair CB steel without arms (seat & back).(FD-75 (M)) 3 Chair CB Steel with arms (Seat & Back) (FD-75M) 4 Chair verandah (FD 19/256) 5 Removing unserviceable locking system and provided new locking system for Almira large/medium etc all as specified and as directed(FD- 67(M), 243 (M)). 6 Removing unserviceable handleand provided new handle superior quality suitable for Almira large/medium etc all as specified and as directed(FD- 67(M), 243 (M)). 7 Removing the old unserviceable/ damage writing pad of Chair Writing Ply propylene and providing new writing padof 18 mm pre-laminated particle board of best quality and sun mica beading all around the writing pad and painting the complete chair with two coats of synthetic enamel paint. 8 S&F table top for table office clerk/general/typist steel of 18mm thick pre laminated teak veneered particle board, with 4mm thick teak wood beading all side duly polished, fixing the top to the table top frame with screws from bottom complete fixed in repairs all as directed by the Engineer-in-Charge (FD-84(m)/FD-1004). 9 All as per item No. 05 above but for table office officer steel top of size 1370mmx760mm x18mm thick(FD- 84 (M) /FD 1003). 10 Removing the unserviceable/broken /damaged parts of hard beds and providing new one and re-assembling and tighteningthe frame work for the following furniture items :- 11 Ply wood top 12 mm thick for hard bed of size 6x3 commercial grade ISI marked (FD-246).. 12 Preparation of old painted steel surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying Two coats of synthetic enamel paint Olive green to all outside/exposed surfaces of the item (inside areas of almirahs/drawers etc totally closed are not to be painted.But open shelves exposed to view are to be painted) all as directed by the Engineer-in-Charge for the following furniture items:- 13 Chair Writing Ply propylene with writing pad 14 Preparation of old painted steel surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust/oily spots etc and applying one coat of synthetic enamel paint Olive green to all outside/exposed surfaces of the item (inside areas of almirahs/drawers etc totally closed are not to be painted.But open shelves exposed to view are to be painted) all as directed by the Engineer-in-Charge for the following furniture items:- 15 Almirah steel large with shelves (FD-67(M)/1031). 16 Almirah medium steel with shelves (FD-243/350) 17 Preparing old painted steel/wooden surfaces of any description width or girth of following furniture items and applying one coat of synthetic enamel paint (OG) on steel surfaces and one coat of synthetic enamel paint (black) on wooden surfaces, such as arms rest of chair etc all as specified and directed. 18 Chair CBA steel without arms (FD-75(M). 19 Chair CBA steel with arms (FD-75(M). 20 Table office clerk steel (FD-3811/84(M)). 21 Table office officer steel(FD-84/1002/1003). 22 Removing the old unserviceable/ damage writing pad of Chair Writing Ply propylene and providing new writing padof 18 mm pre-laminated particle board of best quality and sun mica beading all around the writing pad and painting the complete chair with two coats of synthetic enamel paint.

Contact Information