Tenders Are Invited For Preparation Of Design Documentation And Construction Works As Part Of The Task: Reno ... in Poland

Work Detail

I. Preparation Of Workshop, Multi-Discipline Design Documentation In The Field Of Engineering, Prepared On The Basis Of The Attached Functional And Utility Program And The Preliminary Program And Spatial Concept Ii. Scope Of Construction And Assembly Works Of Stage Ii: 1. Disassembly Of Suspended Ceilings And Floors In Rooms And Communication Areas (In Accordance With The Scope Marked In Annex 2)2. Replacement And Construction Of Electrical, Telecommunications And Low-Current Installations To The Necessary Extent (In Accordance With The Scope Marked In Annex No. 2 To The Opz).3. Finishing Of All Walls, Columns And Other Surfaces In Accordance With The Scope Indicated In Annex 2 To The Opz, Including Painting In Accordance With The Guidelines Contained In Ffu Point 5.1.13 (Pages 31-32). The Walls Should Be Made Using The Q3.4 Plaster Standard. Location Of The Slats On The Walls Of Rooms A, B, C And D And On The Arched Wall In The Hall, In Accordance With The Ffu Point 5.1.11 (Page 30), Colors In Accordance With The Ffu Page 41 And Location In Accordance With The Drawings Of The Ffu, Pages 42–45, As Well As The Scope Marked In Annex No. 2 To Opz.5. Construction Of A Ventilation Distribution System, In Accordance With The Scope Marked In Annex No. 2. In The Scope Of Rooms A And B And Adjacent Communications, It Is Based On The Existing Supply And Exhaust Air Handling Unit With A Heat Exchanger And Supply And Exhaust Ducts Supplied To The Rooms. For Rooms C And D And The Adjacent Corridor, A Separate Mechanical Supply And Exhaust Ventilation System With Heat Recovery Should Be Installed, With A Controller Enabling Control Based On Modbus Tcp/Ip With A Capacity Appropriate To The Planned Number Of People In The Rooms And The Possibility Of Local Control. Presentation Of The Ventilation Solution - On The Contractors Side.6. Replacement Of Radiators - In Accordance With The Scope Indicated In Annex 2. The Contractor Is Responsible For Presenting A Room Heating Solution.7. Replacement Of Radiators Located In The Circulation Area Near The Window Facade, With The Ordering Party Allowing The Use Of Radiators Other Than Channel Radiators - E.G. Panel Radiators. The Ordering Party Expects Partial Development Of The Canal To The Extent Possible While Maintaining Appropriate Heating Parameters.8. Air Conditioning Of Conference Rooms And Communication Areas, In Accordance With The Scope Indicated In Annex 2. Dismantling Of Old Internal Devices, Installation Of New Ones, Including Installation Of Aggregates/Outdoor Units, E.G. On The Roof Of The Building. Avoid Visibly Placing The Units In Front Of The Façade Or On The Front Wall. Out Of Scope - Removal Of Old Units Located In Front Of The Window Facade (This Is The Responsibility Of The Ordering Party).9. Checking The Condition Of The Hydrant Supply Installation Within The Scope Specified In Annex 2 To The Opz, If Poor Technical Condition Is Found - Replacing The Pipes. Replacement Of The Wall Hydrant In Room C

Contact Information