|
3/4 Hydrometer 3/4 Hydrometer: Magnetic Multijet, Metrological Class B, Maximum Flow Of 5M3/H, For Installation In Horizontal Position, Body In Brass Metal Alloy, With At Minimum 60% Copper, 3/4 Nominal Diameter, Sapphire Turbine Bearings, Recording Mechanism Located In Totally Dry Space, With Display That Enable Direct Visual Reading, Through Cyclometric Cylinders With Resolution For Consumption Of Less Than 1 M3; Dome With High Resistance To Weather And Impact, Sealed To The Watchmaker By Fitting, With Gasket, Avoiding Infiltration Problems, Protection Against The Influence Of The External Magnetic Field, Sealing System Against Fraud, Accompanied By A Lid, Washers, Nuts And Tubes. Manufactured In Accordance With Abnt Standards And Inmetro Approval. -The Connections Must Come Packed Separately. -The Connections Must Be Made Of Bronze Or Brass. -Hydrometers Must Have A Minimum Warranty Of 1 Year., Hydrometer 1 1/2Hydrometer 1 1/2 Hydrometer 1 1/2: Magnetic Multijet, Nominal Diameter 1 1/2, Using Cyclometric Cylinders With Resolution For Consumption Less Than 1 M3/M. Consumption Less Than 1 M3/M. High Dome High Resistance To Weather And Impact, Protection Against The Influence Of External Magnetic Field, Nuts And Tubes Manufactured In Compliance With Abnt Standards And Inmetro Approval., Hydrometer 1 1/2 Flanged Hydrometer 1 1/2 Flanged Hydrometer 1 1/2: Magnetic Multijet, Hydrometer 1/2Hydrometer 1/2: Multijet, Magnetic, Maximum Flow Rate Of 3 M3/H, With At Least 60% Copper. Inclination At 45°, Nominal Diameter Of 1/2; Sapphire Turbine Bearings; Recording Mechanism Located In Total Dry Space With Display That Enables Direct Visual Reading, Through Cyclometric Cylinders, With Resolution For Consumption Less Than 1M3; Dome Highly Resistant To Weather And Impact, Sealed By Fitting, Avoiding Infiltration Problems; Protection Against External Magnetic Field Influence; Fraud Sealing System. Accompanied With Lid, Nuts And Tubes. The Dome Must Be Supplied In High-Resistance Transparent Polycarbonate As Provided In Standard Abnt Nm 212, They Must Be Manufactured In Compliance With Abnt Standards Nm 212, Ordinance 246/2000 And Abnt 8194 They Must Be Approved By Inmetro. -The Connections Must Come Packed Separately. -The Connections Must Be Made Of Bronze Or Brass. -Hydrometers Must Have A Minimum Warranty Of 01 (One) Year., Hydrometer 1Hydrometer 1: Multijet, Maximum Flow Rate 10 M3/H, With At Least 60% Copper. Nominal Diameter 1, Sapphire Turbine Bearings; Recording Mechanism Located In Totally Dry Share; With Dials That Enable Direct Visual Reading, Through Cyclometric Cylinders; High Resistance To Weather And Impact Dome; Watch Sealed By Fitting, Protection Against External Magnetic Field Influence; Fraud Sealing System; Accompanied With Lid, Nuts And Tubes; Manufactured In Accordance With Abnt Standards And Inmetro Approval. -The Connections Must Come Packed Separately. -The Connections Must Be Made Of Bronze Or Brass. -The Hydrometers Must Have A Minimum Warranty Of 01 Year., 02/02/2026 - 17:34:52, Hydrometer 2 Flangedhydrometer 2 Flanged: Magnetic Multijet, Nominal Diameter 2, Hydrometer 2Hydrometer 2/; Multijet, Maximum Flow 30M3/H, Nominal Flow 15M3/H, Cast Iron Body.
|
