|
Rental, Installation, Maintenance And Removal Of Luminous Figure In The Shape Of An Easter Egg With Bow And Polka Dots, Three-Dimensional, With Flat Faces. The Figure Must Have Proportional Dimensions, Being: Minimum Dimensions Of 1.45M High, 1.00M Wide And 0.25M Deep, Reaching Maximum Dimensions Of 1.55M High, 10M Wide And 0.35M Deep. The Structure Must Be Produced In Metalon 15.00Mm X 15.00Mm And Flat Bar In Measurements Of 1/8 X 3/8 And 1/2 The Lighting Must Consist Of An Incandescent Luminous Hose In Crystal Color, Made Of Extruded Flexible Pvc, With A Diameter Of 13.00Mm, Containing 36 Micro Lamps Per Meter, Operating At A Voltage Of 220V. The Internal Filling Must Be Carried Out With Led Lamps In Different Colors, Using 2 X 0.5Mm² Electrical Wire, With A Cable Made Up Of 12 0.12Mm² Copper Wires. Pink Girls And Blue Eyes, Pushing A Wheelbarrow With Two Colored Eggs Inside. The Rabbit, Eggs And Wheel Of The Wheelbarrow Must Be Produced In Fiberglass, With A Smooth Finish, Painted In Synthetic Enamel And Application Of Glossy Automotive Varnish. The Structure Of The Wheelbarrow Must Be Made Of Pine Wood, With A Bottom Made Of Marine Plywood And A Glossy Automotive Varnish Finish. The Proportional Dimensions Of The Rabbit Sculpture Must Be, At A Minimum, 0.96M High, 0.40M Wide And 0.60M Long, And Can Reach A Maximum Of 10M High, 50M Wide And 0.70M Long. The Wheelbarrow Must Have Proportional Dimensions Between 0.15M And 0.25M In Height, 28M And 0.38M In Width, And Between 0.85M And 0.95M In Length. The Eggs Must Have Proportional Dimensions With A Height Between 0.21M And 0.31M And A Diameter Between 0.13M And 0.23M., Wearing A Pink Blouse, Maintenance And Removal Of A Stake For Isolation Of Scenes, Made From Processed And Autoclaved Pine Wood. When Used On A Surface That Allows Burial, The Stake Must Have Approximate Dimensions Of 0.95M In Total Height, With 0.60M In Apparent Height And 0.35M Intended For Burial, With 0.045M In Width And 0.045M In Length. When Used On A Rigid Surface That Requires Fixing Using Screws, 60M High, 045M Long, In Which Case It Must Be Equipped With A Suitable Metal Support. The Finishing Must Be Carried Out With Synthetic Enamel Painting In White. Maintenance And Removal Of Metallic Gold Cord, Intended For The Insulation Of Decorative Scenery, With An Approximate Thickness Of 5Mm. The Cord Must Be Composed Of Material Consisting Of 68% Polyester And 32% Metallized Thread, Presenting A Finish Suitable For Decorative Application. 02/09/2026 - 08:52:58, Maintenance And Removal Of Bullet-Shaped Bench Seat, In Green And Pink Colors, With Brown, Three-Dimensional Cover. The Seat Must Be Made Of Fiberglass, With A Smooth Finish And Painted In Glossy Synthetic Automotive Enamel. The Proportional Dimensions Of The Seat Should Be 85M High, 75M Wide And 0.65M Deep, 95M High, 85M Wide And 0.7
|
