Tender For Vertical Axial Flow Pump, At Karukodi Padasekharam(Pulincunnu Grama Panchayat), Padinjare Munduve ... in India

Work Detail

Tender for Vertical Axial Flow Pump, At Karukodi Padasekharam(Pulincunnu Grama Panchayat), Padinjare Munduveliparamb Padasekharam(Ramankary Grama Panchayat), Thaiparamb Thekk Padasekharam(Veliyanad Grama Panchayat), Ramankary Block, Alappuzha , Supply, Installation, Erection, Testing And Commissioning Of Vertical Axial Flow Pumpset Suitable For Handling Fresh And Silty Water With Rpm 960( Syn) Or Less. The Material Of Construction Of Flange, Suction Bell, Bowl, And Shroud Shall Be Ci With 2% Nickel, Impeller, Shaft, Shaft Sleeve, Fasteners And Suction Pipe Shall Be Of Ss Of Suitable Grade. Delivery Pipe Should Be In Ss(Is 226) With 6Mm Thick Of Suitable Length(Varies From 6-10 M) As Per Site Condition. The Prime Mover Of The Pump Is To Be 3Phase Tefc Induction Motor With Isi Certification Operating At 415V +/- 10%, +/- 5%, 50 Hz +/- 5% Connection With F Class Insulation, 10 Mm 3 Core Water Proof Copper Power Cable, 20M As Per Site Condition. Cubicle Type Fully Wired Panel Board With All Necessary Protection Units And Instrumentation. Auto Transformer Starter Of Reputed Make, Mccb, Led Indicators, Selector Switch, Single Phase Dry Running Preventer, Suitable Capacitor. Wiring And Earthing Should Be As Per Regulations And Specifications Of Kseb And Electricalinspectorate. A Screen With 6Mm Gi Welded Mesh With 50Mm X 50Mm Opening Size About ( 20 Sq.M Area) Formed In Gi Angles And Gi Tubes Fitted At The Opening On Top And Sides Of Sump To Prevent Entry Of Unwanted Materials To The Pump Through Inflow Water. Proper I - Section Should Be Provided For Supporting The Motor Mountings And Pedestal. Suitable Chain Block And Tripod Facilities To Be Provided For Lifting The Motor At Least 1.00 M Above Maximum Flood Level. The Rate Quoted Should Inclusive Of All The Charges For Supply, Installation Including Trail Run And Commissioning, All Type Of Transportation And Conveyance, Loading And Unloading Charges, Charges For Factory Testing, Excluding Gst. , Duty Point Head (M)=4.0,

Contact Information