|
Signaling Cone: Made Of Rubber (Extra Flexible), Unbreakable, Weather Resistant, Height 75Cm And Weight Between 3Kg To 4Kg; It Must Be Made Up Of A Single Piece; It Must Have Flexibility Such That, When Under The Impact Of Traffic, It Is Asked To Bend At 90º, It Does Not Present Rupture And Returns To The Initial Position By Itself, Without Presenting Permanent Deformations; It Must Be Predominantly Orange With Two Retro-Reflective, Self-Adhesive, Flexible, White Strips Measuring 10Cm Wide Each. Retro-Reflective Strips Must Be Reflective; Just Below The Lower Band, There Must Be An Engraving Of The Inscription Pmc In Relief (Black), In An Indelible Manner, Measuring Approximately 18Cm Wide By 5Cm High; It Must Have Slits For Insertion Of Zebra Tape And Adaptable To The Finished Board. The Specifications Of The Cone Materials Must Meet The Requirements Contained In Nbr 15071 And 9735., Traffic Bollard Post 75 Cm: Type Ii Bollard Post For Traffic Signaling With 75 Cm High Reflective, With 03 (Three) Reflective Strips Of 10 Cm. Base With Holes For Fixing To The Floor In Orange And White Color. The Specifications Of The Bollard Post Materials Must Meet The Requirements Contained In Nbr 16.658/2019., Bh Plastic Barrier For Road Signage: Bh Plastic Barrier For Road Signage, With A Tubular Fitting System For Fixing The Barriers So That Traces Can Be Formed To Direct The Flow Of Vehicles. The Reflective Strips Are Arranged Vertically, With 3 Strips On Each Of The Two Sides, In Color: Orange With A White Reflective Strip. Minimum Dimensions: Height: 600 Mm; Block Width: 600Mm; Top Width: 600Mm; Block Length: 1020Mm; Total Length: 1110Mm. The Specifications Of The Materials Of The Plastic Barrier Must Meet The Requirements Contained In Nbr 16.331/2014., Reflective Pantographic Barrier: Reflective Pantographic Barrier Is A Portable Device For Signaling, Directing And Blocking Traffic. Features: Vivid Orange Color; Protection Against Uv Rays, Pvc Or Rubber Shoes For Stability, Extendable Up To A Minimum Of 6.00 Meters, Compact, Made Of Virgin Polyethylene, Hot-Pigmented In Orange, With White Reflective Strips. The Specifications Of The Pantographic Barrier Materials Must Meet The Requirements Contained In Nbr 14.644/2014., Traffic Channeling Cylinder: Vibrant Orange Color, Fitting For Placing Signals, With Square Base, Cylindrical Body, With Anatomical Handle, Made With Polyethylene, Hot Pigmented (Extruded) In Orange Color, Protection Against Uv Rays, With Reflective Tape Around Your Surroundings. The Specifications Of The Pantographic Barrier Materials Must Meet The Requirements Contained In Abnt Nbr 15692/2020., Solar Road Sign: Solar Road Sign Suitable For Signaling Accidents, Diversions, Inspection And Works. Features: Manufactured With Double Lens In Amber Color, Top Rotates 360 Degrees, Approximate Diameter Of 180 Mm And Approximate Height Of 300 Mm, Minimum Of 10 High Intensity Leds (Minimum Of 12 Candelas), Internal Battery Rechargeable To Sunlight, Support For Cone Fixation And Top Type T, With At Least 3 Functions., Signal Stick: Electronic Traffic Signal Stick, Impact Resistant, Length Of At Least 52 (+/- 5) Cm, Fluorescent Red Reflective Area Of 30 (+/- 5) Cm Long And 4 Cm In Diameter, Composed Of At Least 6 High-Brightness Red Leds. Cable
|