Bids Are Invited For Hiring Of Company(S) To Supply Consumable Materials, Ppe (Personal Protective Equipment ... in Brazil

Work Detail

Spiral Wire Organizer 6Mm 1/4 Black, Spiral Wire Organizer 16Mm Color Pca9685 16 Channels For Servo Motor Information Servo Motor Control Module And Pwm Ports Operating Voltage: 3.3 To 5 Vdc Terminal Block For External Power Supply Compatible With Microcontrollers 3, 3 And 5V Has 12 Bits Of Resolution Information Address Selection I2c Frequency 40 To 1Khz Dimensions 62 Mm X 20 Mm X 25 Mm Peso 11G, 06/02/2026 - 15:48:58, 06/02/2026 - 15:49:02, 06/02/2026 - 15:49:03, Microcontrolador Pic12f675 Dip-8 * 12F675 * Tipo De Encapsulamento: Tht Tipo De Montagem: Tht Number Of Pins: 8 Eeprom Memory: 0.13 Kb Total Capacity Of The Ram Memory Module: 0.06 Kb Flash Memory: 1.75 Kb, Pic Microcontroller Pic Pic16f877a-I/P - Features 0.001Kb Of Ram Memory. Tht Assembly. Has Dip42 Encapsulation., Arduino Uno R3 With Usb Cable. Specifications: Operating Voltage: 5 V; Input Voltage: 7-12V; Digital Ports: 14 (6 Can Be Used As Pwm); Analog Ports: 6; I/O Pin Current: 40 Ma; Pin Current: 3.3V 50 Ma; Flash Memory: 32 Kb (0.5 Kb Used In Bootloader); Sram: 2 Kb; Eeprom: 1 Kb; Clock Speed: 16 Mhz., Esp32 Wroom-32 Wifi And Bluetooth Module Expansion Shield Board - 30 Pins And Usb Micro/Type C Specifications: Compatible Module: Esp32-Wroom-32; Dc Power Jack: 6.5A 16V; Micro Usb And Usb Type C: 5V; Approx Dimensions: 16Mm X 54Mm X 69Mm; Weight: 24G., Esp-Wroom-32 Model: Esp32 - Esp32 Devkit (30 Pins) Supply Voltage: 4. 5 ~ 9V Dc Operating Current (Typical): 80 Ma Logic Level: 3.3 V Controller: Esp-Wroom-32 Microprocessor: Tensilica X Tensa 32-Bit Lx Clock: Up To 240 Mhz Sram: 520 Kb Adc Pin: 18 12-Bit Adc Pins External Flash Memory: 4Mb Gpio With Pwm, I2c, Spi Functions Wifi Network Support: 802.11 B/G/N (2.4 To 2.5 Ghz) Security: Wpa/Wpa2/Wpa2-Enterprise/Wps Encryption: Aes/Rsa/Ecc/Sha Operating Mode: Station / Softap / Softap + Station/ P2 Bluetooth: V4.2 Br / Edr E Ble (Bluetooth Low Energy) Gpio Digital Pins: 11 (All With Pwm) Pwm Resolution: Up To 16 Bits Does Not Require The Use Of Arduino Integrated Antenna Supports Remote Firmware Upgrade, Wemos D1 Mini Pro Wifi Esp8266, Board Nodemcu Esp8266 Base Specifications: Base Plate: Nodemcu Adapter: For Nodemcu Expansion Compatible: With Nodemcu Lolin Fixing: Through 4 Holes On The Board Has All Nodemcu Pins Jack P4 For External Power Compatibility: Nodemcu Lolin External Power: 6 A 24Vdc Dimensions (Lxwxh): ~60X59x12mm Weight: 25G, Nodemcu V3 Lolin - Development Kit With Esp8266 Programming And Power Supply Via Micro-Usb; Ch340 Usb Serial Chip; Operating Voltage: 5V - 9V (Via Microusb And Vin Pin); Operating Current: On Average 70 Ma (With Peaks Of 200Ma); Wifi Chip Esp8266 - 12E With Standard Wifi Connection 802.11 B/G/N And Built-In Antenna; Antenna Range: 90M; Ram Memory: 20 Kb; Flash Memory: 4Mb; 10 (Ten) Gpio S Ports: With Miso, Mosi, Sck, Pwm, Spi And Rx, Tx (Serial Communication) Functions 01 (One) Adc Port - 10 Bits Resolution; 03 (Three) Operating Modes: Access Point /Station /Access Point + Station; Supports Up To 5 Tcp/Ip Connections And Tcp And Udp Communication; Extra Pins For Access To Gnd, Vin (Input Voltage) And 3.3V; Operating Temperature: - 40ºc To +125ºc; Programming Modes: (Ide Arduino

Contact Information