|
Scraper-Planner. 1. Volume Of Transported Soil: At Least 11 Cubic Meters. 2. Width: At Least 3.7 Meters 3. Weight: Not Less Than 3850 Kg. 4. For Tractors From 165 - 240 Hp. 5. Productivity: From 8 – 10 Hectares Per Day When Using A Ripper And A Leveling System With 2 Antennas. 6. Functionality: Scraper Work And Finishing Layout. The Machine Combines Two Functions: Scraper Work With Soil Movement And Finishing Leveling To The Design Mark (+/- 3 Cm). 7. The Presence In Applications For Participation In The Competition Of Potential Suppliers Of Copies Of Letters (Certificates, Certificates) From Manufacturers Or Their Official Representatives (Dealers Or Distributors), Technical Passports, Certificates Of Product Conformity Specified In The Technical Specifications., 1. Seed Counter 2. Counting Seeds Ranging In Size From 1.0 Mm To 18.0 Mm. 3. -Counting Speed: Up To 2500 Seeds Per Minute. 4. -Counting Of Any Given Number Of Seeds. 5. -Seeds Can Be Loaded Into Bags During Counting. 6. Control Panel With Symbols On The Buttons And A Display To Display The Counting Result. 7. Availability Of A Bluetooth Port. 8. The Counting Result Can Be Transferred To A Computer For Further Processing In Excel Format Or Using Other Software. 9. -Compatible With Seiko Label Printer 10. Briefing Before Putting Equipment Into Operation. 11. The Presence In Applications For Participation In The Competition Of Potential Suppliers Of Copies Of Letters (Certificates, Certificates) From Manufacturers Or Their Official Representatives (Dealers Or Distributors), Technical Passports, Certificates Of Product Conformity Specified In The Technical Specifications Of The Potential Supplier., Pyrolysis Equipment For Processing Agricultural Waste Into Biofertilizers. 1. Capacity Of At Least 5.2 M3/Day (Up To 4 Tons At The Entrance) Operating Temperatures Up To 600C. 2. Dimensions No Less Than 3.3X2.5X5.6 M 3. Set: Pyrolysis Module 1 4. Retort With Lid Assembly 2 5. Refrigerator-Heat Exchanger 1 6. Collector-Separator 1 7. Service Area 2 8. Oven Transport Stand 1 9. Pipelines And Shut-Off Valves Kit 10. Gas Burner 1 11. Passport 1 12. Control Panel 1 13. Installed Power 1.1 Kw 14. Retort Volume, M3 2.6 15. Rated Supply Voltage, V 380 16. Rated Current Frequency, Hz 50 17. Briefing Before Putting Equipment Into Operation. 18. The Presence In Applications For Participation In The Competition Of Potential Suppliers Of Copies Of Letters (Certificates, Certificates) From Manufacturers Or Their Official Representatives (Dealers Or Distributors), Technical Passports, Certificates Of Conformity Of Products Specified In The Technical Specifications., Trailed Corn Forage Harvester. 1. Trailed Corn Forage Harvester 2. Weight (Kg) No Less Than 1388, Length (Mm) No Less Than 2850, Height (Mm) No Less Than 3770, 3. Productivity Not Less Than 40-50 Tons/Hour, Power Consumption (Hp) - 80-100 4. Knives (Pieces) No Less Than 12, Width (Mm) No Less Than 1250. 5. The Presence In Applications For Participation In The Competition Of Potential Suppliers Of Copies Of Letters (Certificates, Certificates) From Manufacturers Or Their Official Representatives (Dealers Or Distributors), Technical Passports, Certificates Of Product Conformity Specified In The Technical Specifications., The Tractor Is Small In Size. 1. 3-Cylinder Engine, Diesel 2. Engine Power Of At Least 50 Hp 3. Transmission: 8 Forward Gears/4 Reverse Gears, Max. Speed 32 Km/H 4. All-Wheel Drive 4Wd 5. Cabin With Heater And Air Conditioner. 6. Hydraulics 36 L/Min 7. Independent Pto 540 Rpm. 8. Front Wheels 8 X 18, 8Pr 9. Rear Wheels 14.9 X 28, 12Pr 10. Fuel Tank Capacity Is At Least 60 Liters. 11. Rear 3-Point Hitch Category Ii 12. 1 Mechanical Scv Valve 13. Front Weight Holder 60 Kg 14. 4 Weights With Quick Coupling, 200 Kg Each 15. Heavy Duty Fuel/Water Separator 16. Hitch 30Mm 17. Dimensions No Less Than 3430X1830x2600 Mm, Wheelbase 1970 Mm 18. Ground Clearance 430Mm The Presence In Applications For Participation In The Competition Of Potential Suppliers Of Copies Of Letters (Certificates, Certificates) From Manufacturers Or Their Official Representatives (Dealers Or Distributors), Technical Passports, Certificates Of Product Conformity Specified In The Technical Specifications Of The Potential Supplier.
|