|
Tender For Building Work Construction Of Resource Room With Smart Class Room And All Necessary Equipment At Agriculture Campus Primary School At Eru, Di Navsari-1 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto All lift and lead.(A) Loose or soft soil 2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto All lift and lead .(B) Dense or Hard soil 3 Filling in foundation and plinth with sand in layers of 20 cm. Thickness including watering ramming and consolidating etc. comp. 4 Filling available excavated Earth (Excluding Rock) in trench plinth side of foundation . in layer not excluding 20 cm in depth consolidation each deposited layer by ramming and watering etc. complete 5 Filling foundation and plinth with murrum or selected soil in layer of 20 cm in thickness including ramming watering and consolidating etc. complete 6 Applying general insecticide pest control treatment to floors, cupboards etc including labour material etc. complete. Using Imidacloprid 30.5 SC. As Per 6313 Part -II (0.075% concentration by mass) is recommended 10.5ml chemical diluted with 5 liters of water application 0.5 liters chemical/ sqm of surface is recommended as per I.S. 7 Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- machine cut stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth 8 Providing and laying controlled cement concrete M150 for curing complete including cost of formwork but excluding the cost of reinforcement for reinforced concrete work in PCC 9 Providing and laying controlled cement concrete M250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work for Foundations, Footings , Mass concrete 10 Providing and laying controlled cement concrete M250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work for Column up to GL 11 Providing and laying controlled cement concrete M250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work for Ground/Plinth Beam 12 Providing and laying controlled cement concrete M200 and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Plinth Slab 13 Providing and laying controlled cement concrete M200 and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Column Up to First Floor 14 Providing and laying controlled cement concrete M200 and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Beams for Up to First Floor 15 Providing and laying controlled cement concrete M200 and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Chhajja Up to First Floor 16 Providing and laying controlled cement concrete M200 and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Lintal Up to First Floor 17 Providing and laying controlled cement concrete M200 and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Slab Up to First Floor 18 Providing and laying controlled cement concrete M200 and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Stair Up to First Floor 19 Providing and laying controlled cement concrete M200 and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Coping Up to First Floor 20 Providing IS Mark TMT FE-550D bar reinforcement for RCC work including bending & placing in position complete up to All floor Level 21 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional below plinth 22 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional Up to First Floor 23 Half Brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - coarse sand ) in foundation and plinth (B) Conventional in super structure. for Up to First Floor 24 Providing and fixing 150 mm wide, approved quality chicken wire mesh at junction of brick work and RCC work or two dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag before applying the plaster, including curing, scaffolding all complete as directed. 25 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) For Up to First Floor 26 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand). Up to First Floor 27 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. 28 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 29 Applying two coats of Acrylic lapy (putty) & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. 30 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. 31 Painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated ceiling surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. 32 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete 33 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid with 100mm brick bat concrete over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed. and Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (A) 40mm thick. 34 Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc 35 Providing and fixing 38 mm thick solid core type-I Single Flush door shuttered having factory made & stamped I.S 12823 grade-I three layered resin flushed door having decorative lamination on both sides & 12 mm thick teak wood beading fixed around the door including melamine polished at edges , fixing by Zinc coated hinges for durable grip including 15cm long stainless steel handle, Aldrop , stopper and necessary Locking system, S.S. fixtures & fastenings etc. directed by engineer in charge. The door from “NOVAPAN” OR Equivalent company holding licence for minimum 5 years. 36 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for DARK shade 37 Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36'' in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3-coarse sand ) finishing with flush pointing in white cement. 38 Providing and laying 10 to 12mm thick ready made Full body vitrified anti skid Flutes step tiles of 120x30cm Tread, 120x15cm riser & 60x60cm Landing with 1cm projecting, nosing half rounded moulding in tread , laid over 12 mm (av.) thick bases of cement mortar 1:3 (1-cement : 3-coarse sand) jointed with grey or colour cement slurry including rubbing and polishing incl. Full body vitrified tiles approved by directed engineer in charge. 39 Providing and fixing mirror polished 18 mm thick Marble stone with full round edge and polished of approved quality in clading on sill and around the doors/ windows/ ventilation with 12 mm thick cement mortor CM (1:4) and fixing with cement slurry & adhesive including moulding of exposed edges as directed by engineering in charge etc. complete. 40 Providing and fixing M.S Safty Grills having 12mm Solid MS Squre bar Horizontally at every equal 0.10m C/C distance and 2 no of bar Vertically at every equal 0.375m C/C distance Fixing on around (5x40) mm Solid MS Patti including cutting, welding and fabrication etc; including one coat of primer of approved quality and two coats of oil painting as per detail drawing etc. complete as per directed Engineer in charge. 41 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. 42 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 110mm dia. 43 Providing laying and jointing in true line and level 200mm dia. Form core Pipe for drainage including fittings as approved by Engineer In Charge. Pipe shall be fixed on existing structure, Wall or ground with the help of clamp or shall be canceled as directed including necessary fittings, etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 44 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight (i) Square mouth traps (B) 150mm x 100mm size P or R type 45 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm intenal dimensions with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4- graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete (i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line. 46 Constructing brick masonry chamber for underground C.I. Inspection C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover 500mmx 700mm intenal dimensions with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete (i) Inside dimensions 500mmx 700mm and 450mm deep for single pipe line. 47 Extra over items for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry chamber.(i) for 455mm x 610mm size. 48 Extra over items for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry chamber.(i) for 500mm x 700mm size. 49 Providing and fixing in position 150 mm high, English letters made from 1.0 mm thick stainless steel sheet as directed by Engineer in charge with all necessary tools & plants etc. complete. 50 Charges for making holes from 50mm to 160 mm dia in RCC wall, slabs or any other RCC members Brick work by diamond core cutting machine HILTI or equivalent including disposing the debris. For all floors . 51 Providing & fixing 25mm thick cupboards plywood shutter including fixing 19 mm and 6mm thick back to back flush all proof plywood including with Teak Wood frame 50 mm x 50 mm size as directed etc. complete including necessary both side lamination 1 mm thick outer side 0.80mm thick inner side fixing by necessary hinges, handles, magnet, stoppers, etc. as directed including fevicol, and other hardware material required. Plywood and all fixture shall be of ISI quality and as approved by engineer-in-charge including cost of teak wood beading, one coat primer and two coats of oil painting or polishing directed. 52 Providing and fixing 25 mm thick polished kota stone Shalve with full round edge and double side polished of any required and fixing with cement slurry & adhesive including both exposed edges cut and Smooth Finished as directed by engineering charge etc. complete. 53 Supply, installation, testing and commissioning Smart Classroom including: Interactive Flat Panel Display 65 inch or above with 4K UHD resolution and multi-touch capability; Desktop/Mini PC with Intel i5 processor or higher, minimum 8 GB RAM and 256 GB SSD / 1 TB HDD with licensed operating system; 1 KVA UPS with adequate backup; wall mount bracket; in-built / external speakers; wireless keyboard and mouse; licensed educational / digital teaching software aligned NCERT / State syllabus; all required cabling, connectors and electrical accessories; on-site installation, configuration and basic teacher orientation; complete solution with minimum year comprehensive onsite warranty. 54 Supply, installation, testing and commissioning of Music System suitable for classroom use including: Audio Amplifier of adequate output power; minimum two (02) speakers suitable for indoor classroom acoustics; minimum one wired microphone and/or one wireless handheld microphone; all required stands, cables and connectors; complete system integration, testing and demonstration; minimum 1-year comprehensive onsite warranty. 55 Supply and installation of licensed Speech Therapy Software suitable for school children including: digital tools for speech, language and communication development; modules for articulation, pronunciation, fluency and language comprehension; age-appropriate interactive exercises; progress tracking and reporting features; compatible with Windows / Android platforms; single-user or classroom license as applicable; installation, configuration and basic user orientation; minimum 1-year license validity with updates and support. 56 Supply, installation and commissioning of basic Soundproof / Acoustic Cabin suitable for speech therapy and inclusive education use, comprising: lightweight prefabricated structure or partitionbased enclosure; internal acoustic sound-absorbing panels / foam sheets for noise reduction and echo control; partial sound insulation suitable for classroom environment; enclosed space adequate for one therapist and one student; curtain/door or lightweight panel closure; basic ventilation arrangement; internal LED light; necessary fittings and accessories; complete installation and handover; minimum 1-year warranty. 57 Supply of Musical Instruments Set suitable for school students and classroom/co-curricular activities, comprising: Drum set (student model); Nagara; Tabla set with dayan & bayan including hammer and cover; Manjira (pair); Khanjri; Harmonium (student grade, portable); Casio / electronic keyboard (minimum 49 keys, student model); Acoustic guitar (student grade) with carry bag; all instruments of standard make, durable quality suitable for regular school use; complete set inclusive of necessary accessories; minimum 1-year warranty where applicable. 58 Supply and fixing of Bulletin Board suitable for school use, comprising: soft board / notice board made of high-quality pin-up surface; sturdy wooden / aluminium frame with laminated finish; minimum size approx. 3 ft × 4 ft or equivalent; wallmountable with all necessary fittings, screws and accessories; suitable for display of notices, student work and information; complete installation and handing over. 59 Supply of Physiotherapy / Exercise Ball suitable for school children and therapeutic use, made of highquality, burst-resistant PVC material; anti-slip surface; suitable for balance training, posture correction, muscle strengthening and physiotherapy exercises; diameter approx. 55–65 cm (or as required); air pump included; durable and safe for regular use in school environment. 60 Supply, installation and commissioning of 12 feet diameter Bouncy Jumping Trampoline suitable for school physical activity and inclusive education use, comprising: heavy-duty galvanized steel frame; high-quality jumping mat with durable springs; fullheight safety enclosure net with padded support poles; protective spring cover; entry ladder; stable base structure; designed for safe jumping and fitness activities; load bearing capacity up to minimum 200 kg; suitable for indoor/outdoor school use; complete with all accessories and fittings; installation and handover at site; minimum 1-year warranty against manufacturing defects. 161 Supply of Acupressure Mat and Pillow Set suitable for school wellness, physiotherapy and inclusive education (CWSN), comprising: acupressure mat of approx. Length 65–70 cm × Width 40–45 cm and acupressure pillow of approx. Length 35–40 cm × Diameter 12–15 cm; made of durable cotton/fabric base with high-quality ABS plastic acupressure points; evenly distributed pressure points for back, neck and shoulder stimulation; non-toxic, skinfriendly material; easy to clean and maintain; complete set inclusive of carry bag 62 EVA foam interlocking mats, non-toxic, washable; tile size approx. 600 mm × 600 mm, thickness 10–12 mm; suitable for play & therapy flooring. 63 Manual wheelchair for CP child; seat width 30–35 cm; safety belt, armrest, footrest, solid rear wheels, anti-tip support. 64 Pediatric therapy tricycle with adjustable seat & handle; wheel size 12–14 inch; safety belt and back support. 65 Child-friendly table, rounded edges; approx. size 900 × 600 × 500 mm (L×W×H); wooden / plastic laminated top. 66 Matching child chair; seat height 280–320 mm; lightweight, durable plastic/wood. 67 Travel size bocce balls Ø 65 mm; complete set with 8 balls and storage case. 68 Standard braille slate with stylus; durable plastic/metal; student size. 69 Complete braille learning kit as specified; includes slate, stylus and accessories with TD0S23+ TD0S03+TD1N70 70 Smart Cane – Type I Assistive smart cane for visually impaired; lightweight aluminium/fiber body; folding type with safety features. 71 Adjustable physiotherapy parallel bars; length 2–3 m, height adjustable 700–1000 mm; steel frame with anti-slip base. 72 Wooden/HDPE balance board; approx. 400–450 mm diameter; non-slip surface. for adult child 73 Annie Device Therapy device for sensory/upperlimb activity; standard school therapy model. 74 Balance bar,Balance training bar; length 2–3 m, height 150–300 mm; wooden/steel construction. 75 Educational lock board with multiple locks/latches; approx. 400 × 300 mm wooden board. 76 Exercise Cycle,Stationary exercise cycle; adjustable seat & resistance; child/adult therapy use. 77 Shoulder Wheel,Wall-mounted shoulder wheel; diameter 600–700 mm; smooth rotation for physiotherapy. 78 Shoulder Ladder,Wall-mounted shoulder ladder; height 1800–2000 mm; wooden/plastic rungs. 79 Carpet,Soft carpet/mat for therapy area; thickness 6–10 mm; easy to clean. 80 Ring Puzzel Toy,Educational ring puzzle set; nontoxic plastic/wood; multi-colour rings. 81 Loop Induction for HI Child,Hearing loop induction system suitable for classroom; amplifier, loop cable, microphone. 82 Manka Ghodi,Therapeutic rocking horse; sturdy wooden/fiber body; child-safe design. 83 Standing Table for CP Child,Adjustable standing table; height 700–1100 mm; safety straps & support pads. 84 Padded physiotherapy bed; approx. 1800 × 600 × 750 mm; steel frame with mattress. 85 Kids slide for indoor/outdoor use; height 1–1.2 m; safe plastic/fiberglass material.
|
