Tender For Purchase Of Electronics Lab Equipment in India

Work Detail

Tender For Purchase Of Electronics Lab Equipment , Electronics Lab Equipment , Multi Output Regulated Dc Power Supply: Specification: Input Voltage : 230V ±10% Ac 50 Hz Output Voltage Current : (A) 0-30V Dc/2Amp (B) 0-± 15 Vdc/1Amp (C) 0 - 5V Dc / 5Amp Load Regulation (Cv) : 0.05 % ± 3Mv From No Load To Full Load Load Regulation (Cc) : 0.05% ±1 Ma From No Load To Full Load Line Regulation (Cv) : 0.01 % ±3Mv For 10% Variation Input Voltage Line Regulation (Cc) : 0.01% ±1 Ma For 10% Variation Input Voltage Operating Mode : Independent And Tracking Mode Ripple : Less Than 1 Mv Meter : (1) Two Digital Meters To Monitor The Output Voltage Current Of Output A (2) One Digital Meter To Monitor The Output Voltage Of Output B , Selectable By Switch (3) One Digital Meter To Monitor The Voltage Of Output C Protection : Against Short Circuit And Overload Warranty Should Have 3 - Years Warranty. , Cathode Ray Oscilloscope: • Dual Trace Dual Channel Oscilloscope • Bandwidth: 30Mhz • Full Bandwidth Sweeping Circuit Is Used In The Sweeping System • The Flexible And Convenient Triggering Mode Has The Functions For Selecting Signals From One Channel Or Triggered By Extension Signals • Alt Trigger To Observe Signals From Two Irrelative Channels • The Instrument Has The Functions Of Tv-H / Tv-V Synchronization And Trigger-Lock To Observe All Kinds Of Signals Stably • From The Terminal For Trigger Input, Ch1 And Ch2 Signals Can Be Output Along With The Triggering Channel To Connect The Extension Frequency Counter • Y Deflection Operation: Y1, Y2, Alt, Chop, Add, Mode X-Y • Vertical Deflection: 5Mv/Div To 20V/Div In Factor 1-2-5 Sequence In 12 Steps • Rising Time: 18Ns • Maximum Input Voltage: 400V (Dc +Acp-P) • Triggering Source: Y1, Y2, Alt, Power, Extension • Trigger Coupling: Ac/Dc (Ext), Norm/Tv-H, Tv-V • Horizontal Sweep Mode: Auto, Trig, Lock, Single • Sweep Time Factor: 0.1Us/Div To 0.2S/Div In 1-2-5 Sequence In 20 Steps. • Magnification: X10 • X-Y Mode Input: X-Axis Yi And Y-Axis Y2 • Z Axis Minimum Input Level: Ttl Level • Calibration Signal: Square Wave Of 0.5V At 1Khz • Ctr Display Size: 8Cm X 10Cm. Warranty: Should Have 3 - Years Warranty. , Arbitrary Function Generator: • Make: Htc Fg2002 • Frequnecy Range • 0.1Hz-2Mhz (Fg-2002) • 0.1Hz-10Mhz (Fg-2010) • Waveforms • Sine Wave, Square Wave, Triangle Wave, Positive & Negative Sawtooth And Positive & Negative Pulse • Square-Wave Front • 0.1Hz-2Mhz100ns • 0.1Hz-10Mhz35ns • Sine Wave Distortion • 1% (10Hz-100Khz) • Frequency Response • 0.1Hz-100Khz±0.5Db • 100Khz-5Mhz±1Db • 100Khz-2Mhz±1Db • Ttl/Cmos Output • Level: Ttl Pulse Low Level Is No More Than 0.4V, High Level Is No Less Than 3.5V • Rissing Time: No More Than 100Ns • Output: Impedance: 500±10% • Amplitude: No Less Than 20Vp-P (Empty Load) • Attenuation : 20Db 40Db • Dc Bias 0-±10V (Continously Adjustable) • Adjustment Range Of Symmetry: • 90:10-10:90 • Vcf Input • Input Voltage: 5V-0V±10% • The Maximum Voltage Ratio: 1000:1 • Input Signal: Dc-1Khz • Frequency Meter • Mesuring Range: 1Hz-20Mhz • Input Impedance: No Less Than 1M?/20Pf • Sensitivity: 100M Vrms • The Maximum Input: 150V (Ac+Dc) With Attenuator • Input Attenuation: 20Db • Mesurement Error: 0.003%±1Digit • Voltage: 220V±10% (110V±10%) • Frequency: 50Hz±2Hz (220V±10%)

Contact Information