|
Shelter For Hydrant Hose 90 Cm X 60 Cm X 17 Cm. The Shelter For Fire Hydrant And Fire Hose, With Dimensions Of 90 Cm In Height, 60 Cm In Width And 17 Cm In Depth, Must Be Manufactured In High-Resistance Carbon Steel Sheet, Finished In Anti-Corrosive Electrostatic Paint In Red, Guaranteeing Durability And Protection Against Bad Weather. The Equipment Must Be Compatible With Overlay Installation, Have A Door With A Transparent Acrylic Display, An Internal Half-Moon Support To Accommodate The Hose, Ventilation Fins For Air Circulation, Reinforced Hinges And Pressure Latch Closure, And May Include A Drip Tray Or Feet As Required. The Shelter Must Accommodate 15 To 20 Meter Hoses (Or According To Project Specification), Nozzles, Valves And Fire Fighting Accessories, Allowing Quick Visual Inspection And Safe Access In Emergency Situations. The Product Must Meet Applicable Technical Standards, Be Supplied Ready For Installation, With Bushings And Screws Included, Approximate Weight Of 10 To 12 Kg, And A Minimum Guarantee In Accordance With Manufacturer Standards., Pump Driver With Conventional On/Off Button. The Equipment Must Have A Maximum Operating Voltage Of 250Vac And Support Currents Of Up To 10A At 120V Or 6A At 250V. The Standby Key Mechanism Must Be Composed Of Pulsing In Green Color And Pulsing Nf In Red Color. Activation Must Occur By Heating The Protective Glass And Then Pressing The Button. The Product Must Operate In A Temperature Range Approximately Between -10°C And 50°C, With Relative Air Humidity Tolerance Of Up To 95%, Without Condensation. The Minimum Degree Of Protection Required Is Ip20. The Weight Of The Equipment Should Be Approximately 185 G And Its Dimensions Should Be Approximately 110 X 100 X 48.5 Mm. The Mandatory External Color Is Red. The Housing Must Be Made Of Abs Material, Accompanied By Glass And Steel Components. The Product Must Be Non-Perishable, Shelf Life Is Indefinite, And Have A Minimum Warranty Of 12 Months Against Manufacturing Defects., Addressable Manual Activator For Fire Alarm Systems. The Addressable Manual Actuator For Fire Alarm Systems Must Comply With The Abnt Nbr Iso 7240-11 Standard, Operate At A Continuous Voltage Between 16 Vdc And 30 Vdc, With A Maximum Supervision Current Of 1 Ma And An Alarm Current Of Up To 7 Ma. The Activation Must Be Carried Out By Frontal Pressure With Resettable Acrylic, With A Visual Indicator In Red Led, Allows Installation In Class A Or B Loops, With Address Range From 1 To 250, And Has Protections Against Polarity Reversal, Overvoltages And Atmospheric Discharges. The Body Must Be Made Of Abs Plastic In Corvermelha, With A Minimum Degree Of Protection Ip20, Suitable For Operation Between -10°C And +50°C And Humidity Of Up To 95% Without Condensation, Also Having A Dry Contact Output, A Minimum Guarantee Of 12 Months And An Indefinite Validity Period As It Is A Non-Perishable Product., Brass Storz Adapter - 2.1/2 X 1.1/2. The Storz Brass Adapter 2.1/2 Mechanical Resistance, Durability And Tightness. It Must Have An Input With A 2.1/2” Female Thread (5 Wires – Nbr 5667) And An Output With A 1.1/2” Typestorz Quick Coupler, In Compliance With Abnt Nbr 14 Standards.
|
