|
Tender For Sewing Machinery , Chain Stitch Machine A. Max. Sewing Speed: 6,000 Sti/Min B. Max. Stitch Length: 4Mm C. Lift Of The Presser Foot: By Hand: 5.5Mm , By Knee: 10Mm D. Needle Bar Stroke: 30Mm E. Needle (At The Time Of Delivery): Tv×7 (#14) #9-#21 F. Thread Take-Up; Needle Bar Thread Take-Up G. Stitch Length Adjustment: By Stitch Dial (Lockstitch) H. Condensation Stitches: By Lever For Condensation Stitching I. Looper System: Rocking Type Looper J. Looper Stroke: 22.6Mm K. Lubrication: Automatic L. Lubricating Oil: Juki New Defrix Oil No.1 (Equivalent To Iso Vg7) , Botton Hole Stitch Machine A. Max. Sewing Speed: Max. 4,200 Stitches/Min ,Normal: 3,600 Sti/Min, When The Non-Lubricated Hook(Optional)Is Used: 3300Sti/Min B. Buttonhole Length: Max. 41Mm (Optional Accessories Available For Up 70Mm, 120Mm Or 220Mm Depending On Subclass Model) C. Stitch Patterns :31 Standard Patterns (Max. 99 Patterns Can Be Input) D. Needle (At The Time Of Delivery) : Dp×5 (#11J) #11J~#14J E. Bar Tacking Width: Max. 5.0Mm (With Special Specification Part: Max.10Mm). F. Lift Of Work Clamp : 14Mm (17Mm When The Reverse-Rotation Needle-Up Function Is Used) G. Motor Type :Compact Ac Servomotor (Direct-Drive System) H. Thread Tension :Active Tension (Electronic Thread Tension Control System) I. Lubrication : Only The Hook Section Needs A Minute -Quantity Lubrication.(No Lubrication Is Required When The Non-Lubricated Hook(Optional)Is Used). J. Control Panel : User-Friendly Lcd Panel With Standard Usb Port And Nfc Capability K. Power Requirement : 3-Phase 200~240V/250Va. , Top And Bottom Cover Stitch Machine (Flat Lock Stitch) A. Stitch Type : 3-Needle, 5-Thread Top And Bottom Cover Stitch (Stitch Type 401) B. Max. Sewing Speed: 6,500 Stitches/Min C. Stitch Length: 1.2 - 3.6 Mm (Adjustable Up To 4.4 Mm) D. Needle System : Uy128gas (#10S )#9S, ~ #12S E. Needle Gauge (Spacing) : 5.6 Mm (Standard, Other Options Available) F. Differential Feed Ratio: 1:0.7 To 1:2.0 G. Presser Foot Lift: 5 Mm (With Top And Bottom Cover Stitch); 8 Mm (With Bottom Cover Stitch Only) H. Lubrication System :Automatic (Forced Lubrication By Gear Pump) I. Lubricating Oil : Juki Machine Oil 18 (Equivalent To Iso Vg18) J. Power Requirement : Single-Phase 100-120V / 200V-240V, 3-Phase 200-240V(With Automatic Thread Trimmer) , 5 Thread Over Lock Machine A. Machine Type: High-Speed, 2-Needle, 5-Thread Over Lock/Safety Stitch B. Max. Sewing Speed: 7,000 Stitches Per Minute C. Stitch Length: 0.6 ~ 3.8 Mm (Max 4.5 Mm) D. Needle Gauge : Typically 3.0, 5.0 Mm Or 3.0 + 2.0 Mm (Varies By Subclass) E. Over Edging Width: Typically 3.0 Mm - 4.0Mm F. Bottom Differential Feed Ratio: Gathering 1:2 (Max. 1:4), Stretching 1:0.7 (Max. 1:0.6) G. Needle System: Dc×27 (Standard, Excluding Some Subclass Model) H. Lubrication: Automatic(The Needle Bar Mechanism And Upper Loop Mechanism Do Not Require Lubrication.) I. Motor Type: Energy-Saving, Direct-Drive J. Weight Of Machine Head: 27 Kg K. Required Additional Spares And Amc. , Button Stitch Machine-Lock Stitch A. Max. Sewing Speed ; 2,700 Sti/Min B. Stitch Length : 0.1-10 Mm (0.1 Mm Step) C. Needle Bar Stroke : 45.7 Mm D. Needle (At The Time Of Delivery) : Dp×17 (#14) E. Lift Of Work Clamp Foot: Max. 13 Mm (Standard Model) F. Button Size : Round-Shaped ,Flat Buttons, F8-F32 Mm (2-Holed, 4-Holed)(Varies By Sub-Model) G. Number Of Patterns : 50 Standard Patterns; 999 Patterns Can Be Input H. Memory: Max. 500,000 Stitches Can Be Stored In Memory I. Motor : Compact Ac Servomotor (Direct-Drive System) J. Lubrication :Hook: Minute-Quantity Lubrication K. Control Panel :Integrated With Machine Head (Standard Lcd Panel With Usb Port) L. Power Supply: Third-Phase 200-240V / 230Va M. Weight : Machine Head (Control Box, Motor, Panel): 56.9 Kg , Single Needle Lock Stitch Machine A. Application: Light To Medium-Weight Materials B. Max. Sewing Speed: 5,000 Stitches/Min C. Max. Stitch Length :5 Mm D. Needle System: Db × 1 (#14) #14~#18 E. Presser Foot Lift :By Hand: 5.5 Mm; By Knee: 13 Mm F. Motor : Direct-Drive Servo Motor G. Lubrication : Juki Machine Oil 7 H. Power Consumption : 210 Va I. Machine Head Weight : 34 Kg (Includes Motor, Control Box, Cover) J. Needle Bar Stroke: 35 Mm , Straight Knife Cutting Machine A. Motors; 110V, 1Ph, 50/60Hz 220V, 1Ph Or 3Ph, 50/60Hz 380V, 3Ph, 50Hz Standard: Single Speed Optional: Dual Speed B. Horsepower ; 65Hp, 1Ph .93Hp, 3Ph C. Weight : 34 Lbs. (15.4Kg) D. Blades : Standard: Carbon Steel Optional: High Speed Steel, Ptfe Coated, Wave Edge, Wave Groove, Angled Tip E. Belts; Standard: Medium Grit Optional: Fine, Coarse, Rough F. Options: Micro Fog, Plastic Master, Auto Stop Note: Autostop, Micro Fog And Plastic Master Are Only Available In 6 In. And 8 In. G. Stroke Sizes : 1.125 In. (2.86Cm) 1.25 In. (3.18Cm) 1.5 In. (3.81Cm) 1.75 In. (4.45Cm) H. Blade Sizes :5 In. (12.7Cm) 6 In (15.2 Cm) 7 In. (17.7 Cm) 8 In. (20.3 Cm) 9 In. (22.8 Cm) 10 In. (25.4 Cm) 11.5 In. (29.2 Cm) 13 In. (33 Cm) I. Cutting Capacity : 3.5 In (8.9Cm) 4.5 In. (11.4Cm) 5.5 In (13.9Cm) 6.5 In (16.5Cm) 7.5 In. (19.1Cm) 8.5 In. (21.5Cm) 10 In. (25.4Cm) 11.5 In. (29.2Cm)
|
