Tender For Supply Of Cardiac Cathlab Consumables in India

Work Detail

Tender For Supply Of Cardiac Cathlab Consumables-1 .010 One Piece core wire with joint less Spring coil length 15cm, cone tip with a tip load of 1.7gm .190cm length tip radiopacity 15cm( Gaia I type) 2 .011 One Piece core wire with joint less Spring coil length 15cm, cone tip with a tip load of 3.5gm190cm length tip radiopacity 15cm Gaia 2 Type) 3 .012 One Piece core wire with joint less Spring coil length 15cm, cone tip with a tip load of 4.5 gm 190cm length tip radiopacity 15cm (Gaia 3 type) 4 .014 Extra support One Piece core extra-support wire with jointless Spring coil with Sion Tech, having composite core with ACTONE Inside, tip load .5g, length tip radiopacity 3cm( Sion Blue ES Type) 5 .014 Extra support One Piece core wire with jointless Spring coil with Sion Tech, having composite core with ACTONE Inside, lowest tip load .3g, length tip radiopacity 3cm, pre-shaped tip, 52 cm hydrophilic coating, available in 190 and 300cm lengths (Suoh type) 6 .014 One Piece core specialty wire with jointless spring coil tapering to .010; 16cm polymer sleeve length with slip coat coating over the polymer sleeve,190cm length; tip radiopacity 16cm (XT R Type) 7 .014 One Piece core specialty wire with jointless spring coil tapering to .010; 1gf of tip load; 16cm polymer sleeve length with slip coat coating over the polymer sleeve,190cm length; tip radiopacity 16cm ( XT A Type) 8 .014 One Piece core wire with jointless spring coil and slip coat on the spring coil, PTFE coating over the shaft, tip load 3g, ,180cm length with tip radiopacity 11cm (Ultimate bros) 9 .018 stainless support guide wire with various tip length 3cm / 5cm with shape able straight & j tip 10 .035 extra support type 190cm/exchange length 11 0.014 guidewire for exchange of microcatheters and other over-the-wire devices; length 165 cm 12 0.75 mm CTO balloon with a tip entry profile of 0.015” and ultra low crossing profile of 0.020” with a proprietary distal welding technology, 2.2F distal shaft, Rated Burst Pressure of 20 ATM and Average Burst Pressure of = 28 ATM. Diameters from 0.75mm, 1.0mm, 1.25mm, 1.50mm, 1.75mm & 2.0mm and lengths from 5mm, 8mm, 10mm, 15mm, 20mm, 25mm & 30mm. 13 0.75mm Uitra low-profile balloon, SF Guide compatible with a tip entry profile of 0.015 and crossing profile of 0.020 with dual hydrophilic coating and a proprietary distal welding technology. 14 014 One Piece core workhorse wire with jointless Spring coil, with Polymer Jacket with Sion Tech, having composite core with ACTONE Inside, length 28cm, with tip load .8g ,180cm length tip radiopacity 3cm( Sion Black type) 15 1.7 F & 1.9F(Tapered tip of 1.4F) Microcatheter -PTFE Inner Layer, Stainless steel braided middle layer, variable Ny-bax outer layer, Proximal OD-2.5F, Distal OD-1.7/1.9F with length 130,150 & 160Cm 16 14 F depth locator designed to measure the distance from the arteriotomy to the skin surface following the use of 10-14F devices or sheaths (12-18F OD) in endovascular catheterization procedures prior to 14F Vascular closure device 17 14 Fr Biomechanical Vascular Closure Device designed specifically for large bore femoral arterial access site closure following the use of 10-14 Fr. devices or sheaths (maximum O.D. of 18 Fr.), An over the wire design with a resorbable anchor & Collagen , sliding suture knot , Visual and auditory cues and simple lever rotation. The Vascular device comes along with depth locator, sheath & introducer. 18 14 Fr Inception Introducer sheath, compatible with all Myval sizes, usable length of 30 cm. 19 14F Catheter with 6 F Pigtail, Peakflow-4.3L/Min, Max Mean-3.7L/Min, Speed Range-0-46000rpm, Interventional Length -92-98Cm 20 18 Fr Biomechanical Vascular Closure Device designed specifically for large bore femoral arterial access site closure following the use of 15-18 Fr. devices or sheaths (maximum O.D. of 25 Fr.)., An over the wire design with a resorbable anchor & Collagen , sliding suture knot , Visual and auditory cues and simple lever rotation. The Vascular device comes along with depth locator, sheath & introducer. 21 2 ml disposable leur lock syringe 22 3 Port Color Coded Manifold with left-off /right off orientation 250 pascal per square inches -500 Pascal per square inches rating and wide port spacing. Clear polycarbonate body to provide durability and visibility Airless rotator and large bore inner lumen throughout 23 3-port manifold with pressure rating up to 250 to 500psi, clear body allowing easy visibility for de-bubbling, easy rotating handles, rotating leur for secure connection, optional extension tubing and on/off handle for options 24 3T Full Body 24/7 MRI Guard- CLS, 14 years battery, Life time warranty , Slimmest pacemaker, VP suppression 25 3T Full Body 24/7 MRI Guard -CLS, 15years battery, Wireless ECG, Atrial ATP, Life time warranty, VP suppression, 26 3T Full Body 24/7 MRI Guard -CLS, Upto 15 years battery, Wireless ECG, Atrial ATP, 20 Recordings , Life time warranty, Slimmest pacemaker, VP suppression, 27 3T MRI COMPATIBLE Dual CHAMBER LEADLESS PACEMAKER WITH ACCESSORIES-Dual Chamber/DDDR, Full dual chamber pacing capability with atrial Pacing. Should have option of retrieval catheter for chronic and acute retrieval, Specialized Helix Fixation Design for atrial and ventricular fixation, System should have option of Mapping before fixation, Should be supplied with compatible introducer and deluery catheter set, Physiological rate response pacing option 28 3T MRI COMPATIBLE Single Chamber VVI/VVIR LEADLESS PACEMAKER WITH ACCESSORIES, Should be supplied with compatible introducer and deluery catheter set,Long lasting with option of chronic and acute retrieval, Physiological rate response pacing option, Should have option of upgrading to dual chamber Pacing, Specialized Helix Fixation Design for ventricular fixation,System should have option of Mapping before fixation 29 40Mhz,5F/1.67mm, 0.026 entry profile,3.1F crossing Profile,rotational,6mm penetration diameter,Bioslide coating 30 40Mhz,6F/2mm, 0.017 entry profile,3.1F crossing Profile,rotational,6mm penetration diameter,ZGlide coating 31 60Mhz,5F/1.67mm, 0.026 entry profile,3.1F crossing Profile,rotational,6mm penetration diameter,Bioslide coating 32 8F depth locator designed to measure the distance from the arteriotomy to the skin surface prior to the dilation of the artery site > 8F 33 A unique Five-layer shaft construction that provides flexibility, torque and tracking over a 0.014 guidewire , Distal 3 cm nylon coil provides rotational assistance for impressive trackability for complex antegrade. Radiopaque tip. 60 cm hydrophilic coating. Distal tip OD 1.6F & Distal tip length 11mm. 34 A unique Five-layer shaft construction that provides flexibility, torque and tracking over a 0.014 guidewire , Distal 3 cm nylon coil provides rotational assistance for impressive trackability, Gold-plated, threaded metallic tip and distal nylon coil for enhanced advancement for antegrade. Radiopaque tip. 60 cm hydrophilic coating. Distal tip OD 2.1F & Distal tip length 2mm. 35 A unique Five-layer shaft construction that provides flexibility, torque and tracking over a 0.014 guidewire , Dual coil tapers down to single coil 21cm from distal tip for lower profile for frontline retrograde. Radiopaque tip. 60 cm hydrophilic coating. Distal tip OD 1.6F & Distal tip length 10mm. 36 Ablation Catheter (non- temperature guided) 37 Ablation Catheter (temperature guided) 38 AGILIS Sterable Introducer Dual-Reach 39 Angio Syringe (10/12/20 ml) 40 Angio Touch Hand Controller Kit 41 Angiographic catheter 4F all shapes and lengths 42 Angiographic catheter 5F all shapes and lengths 43 Angiographic catheter 6F all shapes and lengths 44 Angiography catheter, double Wire Braided with Flextrusion Technology, Radiopaque tip, 100cm length ,sizes (5F,6F), ,CE,DCGI 45 Angioplasty Peripheral Kit 46 Antibiotic impregnated ponch (tyr x Type), All sizes 47 ASD Closure Deluery cable (AGA type) 48 ASD Closure Deluery cable (Non-AGA type) 49 ASD Closure Deluery sheath (AGA type) 50 ASD Closure Deluery sheath (Non-AGA type) 51 ASD Closure Device (AGA type) 52 ASD Closure device (Fenestrated) 53 ASD Closure Device (Non- AGA type) 54 ASD sizing plate (4-38 mm) 55 ASD/PDA/VSD Sizing balloon 56 Atraumatic laser-cut hypo tube design. Maximized ID, Minimized OD- The ID of CAT 7D is 93% the size of the ID of CATD. 7F (2.3mm), 50cm length- 7F sheath Compatible & - 0.014-0.038” wire compatible. XTORQ Tip shape- 28.3mm circumferential sweep. Compatible with Separator 7D. 57 Autologous blood return system with a 60 cc reservoir with sideport and quick release connector compatible with the Inari large-bore syringe having a removable 40 micron filter, US FDA Approved 58 Balloon floatation catheter (Angio-burman ) 59 Balloon floatation catheter (Swan-Ganz) 60 Balloon in Balloon Cather, All sizes 61 Bard pacing lead 62 Biodegradable Polymer Sirolimus Eluting Coronary Stent with Co-Cr Platform having Microporous surface, abluminal coating and shellac resin with Strut Thickness 68µm (SV), 79µm (MV). 63 Biolimus Drug (BA9) coated stent without any polymer or drug carrier 64 Biolimus Drug (BA9) eluting stent with abluminal biodegradable polymer and Cocr stent platform 65 Biomechanical Vascular Closure Device-14 Fr Biomechanical Vascular Closure Device designed specifically for large bore femoral arterial access site closure following the use of 10-14 Fr. devices or sheaths (maximum O.D. of 18 Fr.), An over the wire design with a resorbable anchor & Collagen , sliding suture knot , Visual and auditory cues and simple lever rotation. The Vascular device comes along with depth locator, sheath & introducer.-Size: 14F 66 Biomechanical Vascular Closure Device-18 Fr Biomechanical Vascular Closure Device designed specifically for large bore femoral arterial access site closure following the use of 15-18 Fr. devices or sheaths (maximum O.D. of 25 Fr.)., An over the wire design with a resorbable anchor & Collagen , sliding suture knot , Visual and auditory cues and simple lever rotation. The Vascular device comes along with depth locator, sheath & introducer.-Size: 18F 67 Bipolar Pacing Lead 68 Blade Septostomy Catheter 69 Bleed back Control Valve with twin seals: bleed-back seal and clamp seal - permits high pressure injections up to 400 PSI. Easy grip push-pull knob for single operator use and complete hemostasis. 70 Bovine Pericardium Tri - leaflet Valve, Nickel Cobalt Alloy Frame with Hybrid honeycomb cell design having frame height of 17mm-20mm with 100% External and internal skirting. Navigator balloon with proximal and distal Stoppers and proximal, middle and distal markers/ 14 Fr Python Expandable introducer sheath with one-way haemostatic valve and 24 Fr Proximal entry port MyVal sizes:- 20mm,21.5mm,23mm,24.5mm,26mm,27.5mm,29mm and 32mm 71 Bovine Pericardium Tri - leaflet Valve/Nickel Cobalt Alloy Frame/Hybrid honeycomb cell design/Frame height of 17mm-20mm/External PET buffing/Internal PET sealing/Navigator balloon with proximal and distal Stoppers and proximal, middle and distal markers. With Intermediate Sizing upto 35mm 72 C3 Ref patch for 3D mapping 73 Cable For Indefference Patch Compatible with Current RF Generator 74 Catheter System with Conduction System Pacing compatible with Active Fixation Pacing lead-Catheter should be able to deluer all Active Pacing fixation leads with diameter of 6Fr or below. Catheter should have outer diameter of 9fr or less , The system should have facility of tool to lock the Helix during fixation to avoid helix retraction , Should be supplied with compatible 0 .035” guidewire and slitter 75 CE Approved, balloon expandable transcatheter heart valve systme with two row hybrid interlaced octagon, available in large size matrix. Comes with 14F python introducer sheath compatible. 76 Check flow S.S. braided arrow- 11cm, 16cm, 24cm 77 Circular mapping catheter for pulmonary vein isolation 78 Closure Device for vsacular access site (Angioseal) 79 Cobalt chromium stent with abluminal in groove design (Sirolimus eluting) 80 Coil deluer catheter 81 Coils for coronary perforations All sizes 82 Confida wire for TAVI 83 Connector of Halo catheter (Cordis type) 84 Connector of Halo catheter (St. Jude type) 85 Connectors of ablation catheters (non-temperature guided) (Cordis type) 86 Connectors of ablation catheters (non-temperature guided) (St. Jude type) 87 Connectors of ablation catheters (temperature guided) (St. Jude type) 88 Connectors of ablation catheters(temperature guided) (Cordis type) 89 Connectors of diagnostic decapolar catheters (Cordis type) 90 Connectors of diagnostic decapolar catheters (St. Jude type) 91 Connectors of diagnostic quadripolar catheters (Cordis type) 92 Connectors of diagnostic quadripolar catheters (St. Jude type) 93 Connectors of Duo-Decapolar Catheter (Cordis type) 94 Connectors of Duo-Decapolar Catheter (St. Jude type) 95 Connectors of Lasso catheter (Cordis type) 96 Connectors of Lasso catheter (St. Jude type) 97 Contact Force Sensor Enable Catheter 98 Cool point tubing for radio frequency ablation 99 Coronary Angioplasty balloons (non-compliant) (1.5-4.5mm) 100 Coronary Angioplasty balloons (Semi compliant) 101 Coronary Microcatheter with tapered stainless steel braid construction and inner PTFE Layer, flexible distal portion of catheter has higher PIC to increase flexibility , Distal outer diameter of 1.8F and proximal outer diameter 2.5 F , has a distal 40 cm Hydrophilic coating , available in catheter length 130cm for antegrade approach and 150cm for retrograde approach & has platinum-iridium marker for better visibility under fluoroscopy. 102 Coronary Microcatheter with tapered stainless steel braid construction and inner PTFE Layer, pre shaped angled tip ( 45°, 90°, 90°XT, 120°), Distal outer diameter of 1.8F and proximal outer diameter 2.5 F , has a distal 72 cm Hydrophilic coating for better access in tortuous & angulated lesions , available in catheter length 130cm for antegrade approach and 150cm for retrograde approach & has platinum-tungsten marker for better visibility under fluoroscopy, . 103 Coronary micro-Guide catheter with 15 CM floppy distal segment for Improved navigation in tortuous anatomy. Must Have 1.7 Fr tapered distal tip for superior crossability and guidewire handling and 75cm distal hydrophilic coating for 130cm and 95cm distal hydrophilic coating for 150cm. Must be available in Catheter Length 130cm for antegrade approach and 150 cm for retrograde approach 104 Coronary Sirolimus Drug eluting Balloon, 2.5, 2.75mm, 3.0mm, 3.5mm 105 Covered coronary stent, All sizes 106 Covered Stent for coronary use (balloon expandable) 107 Covered Stent for peripheral use (Balloon expandable) different sizes 108 Covered stent system using a cobalt chromium platform with proBIO amorphous silicon carbide coating and an electrospun polyurethane membrane. Size range includes diameters 2.5–5.0 mm and lengths 15–26 mm. 109 CP stent for coractation covered 110 CP stent for coractation non covered 111 CrossFlex Dual-layer balloon technology, OTW .035 guide wire compatible, 5F sheath compatible to 4 to 7 mm diameter with faster deflation, Usable Catheter length 135cm for all sizes diameter 4mm to 14mm up to 250mm length 112 CrossFlex Dual-layer balloon technology, OTW 014 guide wire compatible, 4F sheath compatible for dia 1.5 to 5 mm length upto 200mm, Usable Catheter length 150cm for all sizes, 113 CrossFlex Dual-layer balloon technology, OTW 018 guide wire compatible, 5F sheath compatible to diameters from 2mm to 5.5 mm & 6mm Length- 20mm to 200mm, Usable Catheter length 150cm for all sizes 114 CTO Channel dilator (corsair) 135 115 CTO Guidewire having Durasteel Core, Intermediate Polymer Sleeve available in tipload between 4.5-4.8gm Tipload and penetration power of 40 kgpsin 116 CTO Guidewire having Durasteel Core, Intermediate Polymer Sleeve available in variable tipload between 4.5-13.0gm and variable penetration power between 40 kgpsin-200kgpsin 117 CTO Guidewire having Durasteel Core, Micro textured tip and Pre-Shaped Micro-J Tip with a length of 1 mm at an angle of 25°. Tipload between 11gm and penetration power of 167 kg/in2. 3 cm Radiopaque Tapered Platinum Nickel (PtNi) Tip Coil 118 CTO Guidewire having Durasteel Core, Micro textured tip and Pre-Shaped Micro-J Tip with a length of 1 mm at an angle of 25°. Tipload between 14gm and penetration power of 224kg/in2. 3 cm Radiopaque Tapered Platinum Nickel (PtNi) Tip Coil 119 CTO Penetration catheter (Tornus) 120 CTO Reentry catheter (CrossBos) 121 CTO Reentry wire (String ray system Boston) 122 CTO wire—0.014; all length 123 Cutting balloon (peripheral) 124 Cutting Balloon- 6F guide catheter compatible PTCA Scoring balloon with 3 electro polished helical Nitinol scoring elements having rectangular edges with a large working range of 2-20 atm available in 2.0, 2.5, 3.0 and 3.5 diameters and lengths of 6, 10 and 15mm. 125 Cutting balloon with blades(coronary) 126 Cutting balloon with wire (Angioscore type) 127 CVi Manifold Kit 128 Cyanoacrylate Glue for Coronary injection 129 DCB- Rapid Exchange, paclitaxel Coated Drug Eluting balloon. (Semi Compliant) with drug concentration of 3.00 µg/mm2. 130 DCB-Lux Coating Technology for rapid drug absorbtion. 5F guide comaptiable usable length 140 cm , Dia 2.0 -4.0 mm 131 DCB-Paclitaxel Drug coated balloon 2microgram/mm2,ATBC excipient (TransPax coating in a ratio of 1:4),built on semicompliant baloon platform,0.014 guidewire (and 5F Guide Catheter) 132 DCB-Paclitaxel Eluting Balloon, with wing seal technology, PVP carrier, M3 Durg release technology Assorted sizes with EU-MDR Certified. 133 Decapolar catheter (Deflectable) 134 Decapolar catheter (Fixed curve) 135 Dedicated balltoon for proximal and distal optimisation of bifurcation lesions with Ultra short shoulder of 0.6 mm and RBP of 22 ATM with hydrophillic coating for bailoon surface and Silicone coating for inner lumen. (POT-PTCA Type) 136 Dedicated dual lumen micro catheter for side branch access 137 Dedicated guidewire for externalization with tip load of 3g length 330cm (RG3Type) 138 Deep Penetration: 21mm maximum depth for complete vessel wall visualizationHigh-Frequency Imaging: 50 MHz for optimal resolution-penetration balance with pullback speeds of 0.5mm/s, 1 mm/s and 10mm/s and pullback length of 150mm. Frame rates of 30 fps and 80 fps allows for complete vessel wall assessment, deep tissue imaging, chronic total occlusion evaluation, long-segment vessel analysis 139 Defibrillator Patch Electrode (NIHON KOHDEN) 140 Deluery Catheter System (DCS) (TAVI) Medtronic 141 Deluery Catheter System (DCS) (TAVI)Edward (Baloon expandable type) 142 Deluery Catheter System Navigation (DCS) Meril 143 Device & catheter systems to remove clot from arteries and veins in peripheral vasculature and for the treatment for pulmonary embolism 144 Diagnostic Angiography catheters (all sizes) 145 Diagnostic Angiography catheters (5-8F) (coronary shapes) 146 Diagnostic Angiography catheters for Radial Use (5- 7F) coronary shape, Non- Terumo type 147 Diagnostic Angiography catheters for Radial Use (5- 7F), coronary shape, Terumo type 148 Diagnostic angiography wires (.025) 150 cm 149 Diagnostic angiography wires (.025) 260 cm exchange 150 Diagnostic angiography wires (.035) 150 cm 151 Diagnostic angiography wires (.035) 260 cm exchange 152 Diagnostic Baby J wire with 1.5mm J tip,Must have radius of 1.5 mm. Super elastic Nitinol alloy, M coat hydrophilic coat, One piece construction for one-to-one torque & Radiopaque polyurethane jacket. Must Have Tungsten-infused polyurethane jacket. 153 Diagnostic Catheter All Sizes JL/JR/AL/AR/Pigtail/Tiger 154 Diagnostic Catheter with unique hydrodynamic surface,available in 5 fand 6 f , large inner lumen, Superior kink resistance,1-to1 torque, with double wire stainless steel braiding in 6f,Atraumatic soft tip 155 Disposable circular fenestrated lead free absorbable sterile barrier pad for protection during fluoroscopy for coronary interventional procedures with a minimum thickness of 0.25 mm lead equivalence, with patented bi-layer homogenous sheet tested & certified to IEC 61331-1:2014, ASTM F3094-14, DIN 6857-1, , ISO 13485 & BARC certified with attenuation greater than 92% at 90kVp. Dimensions: 12” x 17”, Fenestration: Circle Fenestration: 1.5” 156 Disposable Diaphragm Domes and kits with Disposable Domes 157 Disposable ELR 14 Days 158 Disposable ELR 21 Days 159 Disposable ELR 7 Days 160 Disposable non fenestrated lead free absorbable sterile barrier pad for protection during fluoroscopy for coronary interventional procedures with a minimum thickness of 0.25 mm lead equivalence, with patented bi-layer homogenous sheet tested & certified to IEC 61331-1:2014, ASTM F3094-14, DIN 6857-1, , ISO 13485 & BARC certified with attenuation greater than 92% at 90kVp. Dimensions: 12” x 17” 161 Disposable non fenestrated lead free absorbable sterile barrier pad for protection during fluoroscopy for peripheral interventional procedures with a minimum thickness of 0.25 mm lead equivalence, with a minimum length of 34 inches and covering the length from hip to toe; with patented bi-layer homogenous sheet tested & certified to IEC 61331-1:2014, ASTM F3094-14, DIN 6857-1, , ISO 13485 & BARC certified with attenuation greater than 92% at 90kVp. Dimensions: 12” x 34” 162 Disposable non fenestrated lead-free absorbable head cap for protection during fluoroscopy for interventional procedures with a minimum thickness of 0.25 mm lead equivalence 163 Disposable pressure transducer kits with single dome or double dome combinations 164 Disposable Radiation Protection Gloves. Thickness Should be 0.10mm or more than 165 Disposable scoop fenestrated lead free absorbable sterile barrier pad for protection during fluoroscopy for coronary interventional procedures with a minimum thickness of 0.25 mm lead equivalence, with patented bi-layer homogenous sheet tested & certified to IEC 61331-1:2014, ASTM F3094-14, DIN 6857-1, approved, ISO 13485 & BARC certified with attenuation greater than 92% at 90kVp. Dimensions: 12” x 17”, Fenestration: 3.5” x 1.5” 166 Disposable Surgical Gown sterile (Higher end with absolutely front area and cuffs) 167 Dose Control Syringe 12ml dose contriol syringe with clear scale measurements with rotating type connector having finger rings for better grip having CE approval 168 Double disc PDA device 169 Double lumen catheter (Sasuke) 170 Drug eluting balloon- 0.018 paclitaxel eluting balloon with drug-dosage of 2microgm per sq.mm. available in diameters ranging between 2mm to 4mm and lengths ranging between 80mm to 150mm 171 Drug eluting balloon- 0.035 paclitaxel eluting balloon with drug-dosage of 2microgm per sq.mm. available in diameters ranging between 5mm to 7mm and lengths ranging between 100mm to 150mm 172 Drug eluting balloon Paclitaxel eluting (Coronary) 173 Drug eluting balloon Paclitaxel eluting (Peripheral) 174 Drug eluting balloon Sirolimus eluting (Coronary) 175 Drug eluting balloon Sirolimus eluting (Peripheral) 176 Drug eluting balloon-0.014 paclitaxel eluting balloon with drug-dosage of 2microgm per sq.mm. available in diameters ranging between 4mm to 6mm and lengths ranging between 40mm to 150mm-.014 guidewire compatible, diameters ranging between 4mm to 6mm and lengths ranging between 40mm to 150mm 177 Drug eluting stents Biolimus with Stainless steel platform abluminal coating 178 Drug eluting stents Biolimus with Stainless steel platform quadrature link design 179 Drug eluting stents Everolimus with Cobalt chromium platform 180 Drug eluting stents Everolimus with platimum chromium platform 181 Drug eluting stents Sirolimus with Cobalt chromium platform 182 Drug eluting stents Sirolimus with Cobalt chromium platform bioabsorbablenpolymer with hybrid design , with abluminal fusion coating, data in diabetic patient 183 Drug eluting stents Sirolimus with Cobalt chromium platform biodegradable polymer 184 Drus Eluting stent Everolimus-eluting with HeliCore™ design on a CoCr platform,with 65 µm struts and 50 µm mid-to-mid S-link connectors, with durable biocompatible polymer. 5Fr Guiding catheter Compatible, with size matrix – diameter 2 to 4.5mm, length from 8 to 47mm, and having Nominal Pressure at 9 ATM, and RBP of 16 ATM. 185 Dual-chamber pacemaker with a compact 8 cc volume and extended battery longevity of up to 12 years. Fully MRI-compatible with Auto MRI mode for 1.5T and 3.0T full-body scans. Integrated sleep apnea monitoring enables continuous detection of nocturnal respiratory disturbances. advanced atrial fibrillation (AF) management algorithms, including support for patients with sinus node dysfunction, ensuring optimal atrioventricular synchrony and reduced ventricular pacing 186 Dual-chamber pacemaker with a compact 8 cc volume and extended battery longevity of up to 12 years. Fully MRI-compatible with Auto MRI mode for 1.5T and 3.0T full-body scans. Integrated sleep apnea monitoring enables continuous detection of nocturnal respiratory disturbances. advanced atrial fibrillation (AF) management algorithms, including support for patients with sinus node dysfunction, ensuring optimal atrioventricular synchrony and reduced ventricular pacing 187 Dual-chamber pacemaker with MRI compatibility (3.0T), automatic MRI mode activation. dual sensor technology (accelerometer and minute ventilation) Includes integrated sleep apnea monitoring and & advanced arrhythmia detection, lead integrity monitoring, and remote follow-up capability with Safe R algorithm 188 Dual-chamber pacemaker with MRI compatibility (3.0T), automatic MRI mode activation. dual sensor technology (accelerometer and minute ventilation) Includes integrated sleep apnea monitoring and & advanced arrhythmia detection, lead integrity monitoring, and remote follow-up capability with Safe R algorithm 189 Dudecapolar catheter 190 Duodecapolar catheter H- curve 191 DVD-R with Jewel thick case 192 Effectively minimizes blood loss and provides a smooth channel for interventional device deluery. Easy Push-Pull mechanism allows single handed operation 10F Bore Size for usage with a variety of devices. DCGI Approved. 193 Embolic Protection device (Coronary), 194 Embolic Protection device (Periphearl), 195 Endomyocardial biopsy forceps Femoral 196 Engine Powerful aspiration pump with 29-inch HG deep vacuum. Canister with integrated clot catheter. LED Canister should be sleek and simple design 197 Ensite Array (for non-contact mapping) 198 Ensite NavX patch 199 Everolimus drug eluting Cobalt chromium thin strut thickness 0.0032’’/ 81 µm, DES coated with Durable Biocompatible Fluorinated copolymer, Multi Link platform with Peak to Valley-3-3-3 taller nonlinear links, Single layer 72D Pebax Balloon with 5 folds, Assorted sizes from 2.0mm to 3.25 with 3.75mm as expansion - 3.5 to 4.00mm with maximum expansion of 5.5mm, Lower Crossing profile of 0.039 and Flexible distal tip and Co-axial Positioning System. 200 Everolimus drug eluting Cobalt chromium thin strut thickness 0.0032’’/ 81 µm, DES coated with Durable Biocompatible Fluorinated copolymer, Multi Link platform with Peak to Valley-3-3-3 taller nonlinear links, Single layer 72D Pebax Balloon with 5 folds, Assorted sizes from 2.0mm to 3.25 with 3.75mm as expansion - 3.5 to 4.00mm with maximum expansion of 5.5mm, Lower Crossing profile of 0.039 and Flexible distal tip and Co-axial Positioning System. 201 Everolimus drug eluting stent system, open & closed hybrid cell design, ultra thin 60 microns struts & 40 microns connectors with hydrophilic coated balloon deluery system having diameters 2 mm to 5.00 mm and lengths 08 mm to 48 mm . 202 Everolimus Drug Eluting Stent/Cobalt Cromium Platfrom with Ultra Low Profile of 0.037 mm ,Ultra-thin biodegradable polymer (PLLA + PLGA) with high stent surface finish, Strut thikness of 65 micron & Over Expanison Capacity more than 5mm & longer lengths of 50mm -52mm 203 Everolimus Drug Eluting Stent-Cobalt Cromium Platfrom with Ultra Low Profile of 0.037 mm ,WitH Lower Concetration of Drug dose on strut <1.4 µg/mm2 ,U LINK with Open Cell Design ,Lower Strut thikness of 65 micron & Over Expanison Capacity more than 5mm & longer lengths of 50mm -52 204 Everolimus Eluting Cobalt chromium DES, thin strut thickness 0.0032’’ , Durable Biocompatible Fluorinated copolymer , Multi Link 8, Multilayer pebax balloon mounted, Mid Marker stent placement , with RBP of 18ATM with assorted Sizes till 38mm length, indicated for complex and CTO lesions. With advanced technologies like Skive and CPS with robust hypotube. Along with 12 CE indications with the shortest DAPT indication of 28 days in HBR patients. 205 Everolimus Eluting Cobalt chromium DES, thin strut thickness 0.0032’’ , Durable Biocompatible Fluorinated copolymer , Multi Link 8, Multilayer pebax balloon mounted, Mid Marker stent placement , with RBP of 18ATM with assorted Sizes till 38mm length, indicated for complex and CTO lesions. With advanced technologies like Skive and CPS with robust hypotube. Along with 12 CE indications with the shortest DAPT indication of 28 days in HBR patients. 206 Everolimus eluting coronary stent system, Cobalt-chromium platform with strut thickness of 50 µm,biodegradable and biocompatible polymer, hybrid cell design, 5F guide catheter compatible. 207 Everolimus-eluting PtCr stent having strut thickness of 89um with Synchrony abluminal bioabsorbable polymer with 4um thickness , designed for large vessels 12 peak design and post expasion limit of 6.0mm available in diameters 3.50–5.00 mm and lengths 8, 12, 16, 20, 24, 28, 32 mm 208 Everolimus-eluting PtCr stent with abluminal bioabsorbable (4um) PLGA polymer (resorbs ~4 months) and XD flexible deluerysystem (with 127mm long stainless steel hypotube midshaft having ~700 lasercuts and polyamide cover with hydrophillic bioslide coating), lesion entry profile ~1.0–1.1 mm, crossing profile ~0.039”, available in diameters 2.25–5.00 mm and lengths 8, 12, 16, 20, 24, 28, 32, 38 mm 209 Exicemer Laser catheter X-80 catheters with guidewire compatanility of 0.014 inch , Guiding catheter compatability of 6F, Maximum tip outer diameter ofm 0.038 inch , Maximum Shaft outer diameter of 0.049 inch with a working length of 100 mm , capability to generate a fluence of 30-80 mJ/mm2 with a repitation rate of 25-80 Hertz. Available in 0.9 mm and 1.4 mm sizes. 210 Extra Support Durasteel CTO Guidewire with Full Polymer Cover, Gold Marker at 4.5cm from distal tip and tipload between 2.5-2.7gm 211 Extra Support Durasteel Guidewire with Full Polymer Cover, Marker at 4.5cm from distal tip and tipload between 1.3-1.5gm 212 Femoral Introducer sheath available in 11 cm, 5F-8F Atraumatic tapered tip minimizing vascular damage, enhanced pushability and flexibility, enlarged inner diameter for ultra smooth transition between dilator and sheath. lubricant coating and specially designed 213 FFR wire with 0.014” optical pressure guidewire, 185 cm length, shapeable atraumatic tip, platinum radiopaque 3 cm tip, 1:1 torque response, hydrophilic distal & hydrophobic proximal coating, dual markers at 90 cm & 100 cm, compatible with POLARIS/AVVIGO systems. 214 Flexible wire-reinforced IAB catheter for kink-resistance,Pre-wrapped double-lumen 7.5 Fr catheter, Wire-reinforced shaft with repositioning sleeves,Pre-mounted peel-away hemostasis device for sheathless insertion,Driveline tubing with locking quick-connect interface, Each pack includes separately packaged driveline gas tubing compatible with Datascope and Arrow Teleflex systems,Large-bore connector designed to maximise gas flow, Universal insertion kit for sheath or sheathless technique 215 Flexible, soft catheter design,7.0 Fr and 8.0 Fr catheter,Polyurethane catheter shaft with soft, flexible feel,Cardiothane® II balloon membrane,0.027 central lumen (0.025 guidewire compatible),Centimetre markings on catheter body for placement guidance, Hydrophilic coating on balloon,Optional hemostasis device,Driveline gas tubing compatible with Datascope and Arrow Teleflex systems, Minimises clotting, reduces maintenance, and maintains arterial pressure waveform quality 216 Front cutting burr that rotates concentrically over a guidewire and differentially ablates plaque and calcium to optimally prepare the vessel prior to stenting compatible with ROTAPRO system, burr sizes from 1.25 mm to 2.5 mm 217 Gladius wire (Asahi type) 218 Glide catheter/support catheter 219 Guide catheter for intracoronary OCT, 0.014 guidewire, and 6 F guide catheter compatibility. Lubricous hydrophilic coating and low tip entry profile for crossing tight, distal lesions.2.7 F crossing profile and supportive proximal shaft provide superb deluerability to the area of interest. Lens marker is immediately proximal to imaging lens and the distance of lens marker from tip should be 23 mm and proximal marker at 82 mm from the lens marker. 220 Guide extension catheter 5.3F to 4.7F/5.0F Tapered tip Guide extension catheter with a non metallic resinious atraumatic tip, braided and hydrophillic coated with a unique large entry port available with inner diameter of 1.33 mm or 1.43 mm 221 Guide Extension Catheter available in variable diameters of 4.7F and 5.0F for accessing distal anatomy and deluering high profile devices; Guide Extension Catheter with a tapered distal shaft for accessing distal and challenging coronary anatomy; Guide Extension Catheter with a Resinous atraumatic tip; Guide Extension Catheter with a large entry port design for easy device insertion 222 Guide extension catheter with single wire braided, 6F,7F, 6F Long,Hydrophilic coating,stailess steel hypotube,polymer catheter segment 1*1 wire braiding,Z glide Coating. 223 Guide-extension catheter with a 17 cm Half-Pipe section using Half-Pipe Technology to align devices and minimise collar interaction. Stainless-steel push rod with a 150 cm working length and a 25 cm rapid-exchange segment. Two radiopaque markers located at the distal tip and RX transition, and two white positioning markers at 95 cm and 105 cm. Coil-reinforced distal extension for kink resistance and stable deep seating. Available in 5.5 F to 8F and compatible with standard guide catheters. 224 Guideliner catheter 225 Guidewire support microcatheter with advanced hydrophilic coating and unique shaft design that has fluoro-resin inner surface to provide reinforced lubricity: advanced braiding technology in the shaft of the microcatheter Tip Profile 1.4 fr. Distal profile 1.7 fr length: 135cm, 150cm 226 Guidewire support microcatheter with advanced hydrophilic coating and unique shaft design that has fluoro-resin inner surface to provide reinforced lubricity: advanced braiding technology in the shaft of the microcatheter Tip Profile 1.5 fr. Distal profile 1.8 fr length: 135cm, 150cm 227 Guiding catheter with inner Material PTFE,4*2 Braided,Soft atraumatic radiopaque tip,100cm, 6-8 Fr available curves-JL, JR, CLS, FL, FR, AL, AR, IM, MP, VL, ART3, LeftBU, KR, Kimny, Q Curve, Voda Left 228 Guiding catheter with outer material- polyester ether, inner material -PTFE, 2*2Braided ,Soft Atraumatic Radiopaque tip, 6F,7F,8F,100cm length Available curves are- JL, JR, CLS,FL, FR, AL, AR, IM, MP, VL,Kimny, ART3,HS, Q-Curve,Voda Left Curve 229 Guiding Catheters for Angioplasty (all shapes, 5-7 F, coronary, Radial route) Terumo type 230 Guiding Catheters for Angioplasty (all shapes, 5-8 F, coronary, Radial route) Non-Terumo type 231 Guiding Catheters for Angioplasty (all shapes, 6-8F) for Renal use 232 Guiding Catheters for Angioplasty (all shapes, 6-8F, coronary, Femoral route) 100cm 233 Guiding Catheters for Angioplasty (all shapes, 6-8F, coronary, Femoral route) 90 cm 234 Hair clipper disposable 235 Halo catheter 236 Hat-shaped designed PDA occluder device,Platinum coating of using nano fusion technology,Polypropylene fabric sewn inside the occluder device, Extended retention portion provides proper positioning of the device in the ductus arteriosus, 5F and 6F deluery cables available in individual packaging, Clinically proven safe and effective PDA occlude, Publications demonstrating minimal nickel leaching up to six months follow-up 237 Hemostatic valve with push-pull button valve opener minimizes blood back flow Usable Length: 10 cm Guidewire Compatibility: 0.010 to 0.035 mm 238 High pressure coronary indiflation device 50 atm 239 High-Speed Imaging: 100 kHz A-scan rate for real-time visualization. Max frame rate of 180FPS for plaque analysis and stent assessment. High-resolution plaque characterization, stent deployment assessment, thin-cap fibroatheroma detection, precise vessel sizing. Dual pullback length of 54mm and 90mm with pullback speeds of 18mm/s, 27mm/s, 36mm/s. Has scanning range of >11mm and optical sensitivity of >100db 240 Holter recorder (1-7 days) with per day quote 241 Hybrid aortic stent graft 242 Hydrophilic-coated guide-extension catheter designed to enhance deluerability in complex anatomies. Provides smooth advancement through proximal, stenotic, bifurcation, tortuous, and distal lesions with reduced friction.17 cm rapid-exchange section with 150 cm working length for easy device loading and control.Radiopaque distal marker and proximal white positioning markers for accurate placement. 243 Hydrophillic Precoated wire. In diameter 0.035 inches. Length 150 cm and 260 cm long. Available as straight & J-Shaped tip. DCGI Approved 244 I.V Flow regulators with injection ports or with I.V. Sets 245 Impella 5 pump, 9f system 246 Intra cardiac echocardiography with tip deflection viewflex Xtra ICE catheter 247 Introducer Needle-Size Available 18G (pink and white hub) with superior back cut technology 248 Introducer Needle-Size Available 21G( white hub) with superior back cut technology 249 Irriagted ablation catheter for 3 D mapping 250 Irriagted ablation catheter for 3D mapping with flexible tip and laser cut technology 251 Irrigated Bidirectional 16 Electrode High Density Mapping Catheter Compatiable with Ensite 3d System with Connector 252 IVL Catheter and Connector Cable,- Intravascular Lithotripsy Intuitive Catheter with Rx system for treating highly calcified lesions,- Integrated 12mm SC balloon,- NP – 6atm/ RBP – 10 atm,-Diameters:2.5,3.0,3.5,4.0mm,- 2 emitters (120 pulses per catheter) 253 IVL Catheter and Connector Cable,- Intravascular Lithotripsy Intuitive Catheter with Rx system for treating highly calcified lesions,- Integrated 40mm SC balloon,- NP – 6atm/ RBP – 10 atm,-Diameters:2.5,3.0,3.5,4.0mm,- 4 emitters (160 pulses per catheter) 254 IVL Catheter and Connector Cable,- Intravascular Lithotripsy Intuitive Catheter with Rx system for treating highly calcified lesions,- Integrated 60mm SC balloon,- NP – 6atm/ RBP – 10 atm,-Diameter 8mm 5 emitters (300 pulses per catheter) 255 IVL catheter C2+ 256 IVUS Catheter with unique plug-and-play intravascular imaging catheter, GlyDx hydrophilic coating for increased lubricity, a long, rapid exchange lumen for improved pushability, three radiopaque markers, compatibility with SyncVision co-registration with angiography 257 Japanese PMDA approved Scoring Balloon with triple nylon microtomes with 120 degree angle between them . A working length of 142Cm with 2.1F proximal shaft and 2.6F distal shaft and an RBP of 24 atmosphere. Large bore mechanical aspiration catheter for aspiration Pulmonary thrombectomy/ Deep venous thrombectomy -Computer Aided Vaccum thrombectomy catheter kit for VTE Mechanical Aspiration with working length of 115 cm. Should have multi-pitch, laser-cut stainless steel hypotube for 1:1 torque transfer & advance deliverability. Catheter Should have ID of (3.33 mm), OD of 12 Fr with HTORQ tip with 50 mm circumferencial sweep. It should be compatible with 12 Fr sheath & wire platform (.014-.038) with proprietory seperator technology. Aspiration tubing Audio visual cues to help indicate location of clot in system & compatible with engine with (-29.2) inHg deep vaccum-Working length 115 cm, ID of 3.33 mm, OD of 12 Fr; Large bore mechanical aspiration catheter for aspiration Pulmonary thrombectomy/ Deep venous thrombectomy-Computer Aided Vaccum thrombectomy catheter kit for VTE Mechanical Aspiration with working length of 100 cm with flash mode designed for expedited venous clot removal. Should have multi-pitch, laser-cut stainless steel hypotube for 1:1 torque transfer & advance deliverability with Lightning Flash tubing + Flash Catheter +Accessories + Select Catheter. Catheter Should have ID of 4.5mm, OD of 16 Fr with HTORQ tip with 50mm circumferencial sweep.It should be compatible with 16 Fr sheath & wire platform (.014-.038) with proprietory seperator technology. Should have Catheter hub port +Aspiration tubing port + flow cap + Flush port as RHV Packaged with 6F Select Catheter with BER or H1 tip to further aid in vessel selection. Dual clot Detection Algorithems with Max ID Technology. Aspiration tubing Audio visual cues to help indicate location of clot in system & compatible with engine with (-29.2) inHg Deep vaccum-Working length 100 cm, ID of 4.5mm, OD of 16 Fr Large bore mechanical aspiration catheter for aspiration Pulmonary thrombectomy/ Deep venous thrombectomy-Computer Aided Vaccum thrombectomy catheter kit for VTE Mechanical Aspiration with working length of 100 cm. Should have multi-pitch, laser-cut stainless steel hypotube for 1:1 torque transfer & advance deliverability. Catheter Should have ID of (3.33 mm), OD of 12 Fr with HTORQ tip with 50 mm circumferencial sweep. It should be compatible with 12 Fr sheath & wire platform (.014-.038) with proprietory seperator technology. Aspiration tubing Audio visual cues to help indicate location of clot in system & compatible with engine with (-29.2) inHg deep vaccum-Working length 100 cm, ID of 3.33 mm, OD of 12 Fr; Large bore mechanical aspiration catheter for aspiration Pulmonary thrombectomy/ Deep venous thrombectomy-Computer Aided Vaccum thrombectomy catheter kit for VTE Mechanical Aspiration with working length of 115 cm with flash mode designed for expedited venous clot removal. Should have multi-pitch, laser-cut stainless steel hypotube for 1:1 torque transfer & advance deliverability with Lightning Flash tubing + Flash Catheter +Accessories + Select Catheter. Catheter Should have ID of (4.5 mm), OD of 16 Fr with HTORQ tip with 50 mm circumferencial sweep. It should be compatible with 16 Fr sheath & wire platform (.014-.038) with proprietory seperator technology. Should have Catheter hub port +Aspiration tubing port + flow cap + Flush port as RHV Packaged with 6F Select Catheter with BER or H1 tip to further aid in vessel selection. Dual clot Detection Algorithems with Max ID Technology. aspiration tubing Audio visual cues to help indicate location of clot in system & compatible with engine with (-29.2) inHg deep vaccum-Working length 115 cm, ID of 4.5mm, OD of 16 Fr Large bore mechanical aspiration catheter for aspiration Pulmonary thrombectomy/ Deep venous thrombectomy-Computer Aided Vaccum thrombectomy catheter kit for VTE Mechanical Aspiration with working length of 80 cm with flash mode designed for expedited venous clot removal. Should have multi-pitch, laser-cut stainless steel hypotube for 1:1 torque transfer & advance deliverability with Lightning Flash tubing + Flash Catheter +Accessories + Select Catheter. Catheter Should have ID of 4.5 mm, OD of 16 Fr with HTORQ tip with 50 mm circumferencial sweep. It should be compatible with 16 Fr sheath & wire platform (.014-.038) with proprietory seperator technology. Should have Catheter hub port +Aspiration tubing port + flow cap + Flush port as RHV Packaged with 6F Select Catheter with BER or H1 tip to further aid in vessel selection. Dual clot Detection Algorithms with Max ID Technology. Aspiration tubing Audio visual cues to help indicate location of clot in system &compatible with engine with (-29.2) inHg deep vaccum-Working length 80 cm, ID of 4.5mm, OD of 16 Fr 263 Large bore Pulmonary thrombectomy catheter-Large bore - 16F pulmonary thrombectomy/embolectomy catheter, length 105 cm-Large bore catheter 16F, length 105cm 264 Large bore Pulmonary thrombectomy catheter-Large bore - 20F pulmonary thrombectomy/embolectomy catheter, length 90 cm-Large bore catheter 20F, length 90cm 265 Large bore Pulmonary thrombectomy catheter-Large bore - 24F pulmonary thrombectomy/embolectomy catheter, length 90 cm-Large bore catheter 24F, length 90cm 266 Laser lead extraction sheath- 12 F, 14 F and 16 F 267 Lassocatheter 268 Lead extraction serial dilators. 269 Lead extraction sheath with active cut mechanism 270 Lead locking catheters for lead extraction 271 Lead locking device for lead extraction 272 Leadless VVI pacemaker endocardial implant deluery system 273 Left atrial appendage closure device deluery cable (AGA) 274 Left atrial appendage closure device deluery sheath (NON AGA) 275 Loading System (LS) LS- ENVEOR-23 (TAVI) Medtronic 276 Loading System (LS) LS- ENVEOR-2629 Medtronic 277 Long sheath 70- 110cm (4fr-10fr) 278 Manual Aspiration Aspire Max Aspiration system 279 Manual Aspiration catheter (Coronary) 280 Mapping catheter for 3 D mapping 281 Marker Pigtail 282 MCS intracardiac pump (meryl) 283 Mechanical Thrombectomy device kit for Deep Vein Thromboisis 284 Micro Catheter 1.9F to 1.4F Tapered Tip coronary micro catheter with flatwire braiding, Hydrophillic coating and inner PTFE lining having a Tip entry profile of 0.019 285 Microcatheter (.014 wire compatible) 286 Micropuncture set all sizes 287 Mitral valve balloon dilatation catheter (Inoue type) size- 24, 26, 28 mm 288 Mitral valve balloon dilatation catheter (Non -Inoue type) size- 24, 26, 28 mm 289 Mitral Valve Dialaltion Balloon (Non-inoue) 290 Mitral Valve Dialaltion Balloon Accessories (inoue) 291 Mitral Valve Dialaltion Balloon Accessories (Non inoue) 292 Mitral Valve Dialaltion Balloon Accessories (Non- Inoue) 293 Mother and child (Heart Rail) catheter 294 Mullins sheath 295 Multi-layered, multiple-lobed Nitinol mesh design for rapid embolization within the vessel To embolize medium and high-flow vessels Guide Catheter or Sheath Deluerable: Compatible with 4-7 F sheaths Or 5-9 F guide catheters depending on device size 296 Multi-Use Syringe Kit 297 Myocardial biopsy instrument (Biop) 298 Navigator balloon to mount tanscatheter valve 299 Navistar Thermocool 300 Near infrared spectrascopy & Intravascular Imaging catheter for detection of Lipid Core Plaques (LCP) and assessment of vessel structure with an automatically adjustable frequency bandwith of 35-65 MHz depending on the need of the calcium with a pulback speed upto 2mm/sec and a pullback lenght if 150 mm. Catheter working length of 160 cm 301 Nitinol core workhorse PTCA guidewire with a tip load of 0.50- 0.80 gram 302 Nitinol mesh based self expandable , mushroom shaped PDA with retention skirt and polyster fabric. The retention discs to be cylindrical plugs with flange having low profile retention discs. Available in thickness of 70,100, 150 microns with sheath compatibility of 6F - 12F and deluery system lenght of 856mm, sizes - 4X6 , 6X8, 8X10, 10X12, 12X14, 14X16, 16X18, 18X20, 20X22, 22X24mm, DGCI approved 303 Nitionl wirew mesh based self expandable, double disc having a short cylindrical waist between the two discs. Sewn with polyster fabric increasing crossibility. Having wire thickness of 100,150,180 and 200 microns with deluery system. Length of 865 mm and sheath compatibility from 7F -14F, sizes - 6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40 &42mm, DGCI approved 304 Non compliant balloon from 2.0mm diameter to 5.0mm diameter with 6-30 mm, length, soft rounded tip and trifold technology and 0.16inch crossing profile 305 Non-complaint coronary balloon with single piece outer member and multilayer CrossFlex Balloon Technology made up of pebax (1.5mm to 5.00mm) & grilamid (5.5mm-6.00mm). Faster deflation time of ~ 7secs. Round Tip with Lesion Entry Profile of 0.020” available in diameter 1.5mm-6mm and lengths in 6mm-25mm with Skive Technology on Mid shaft of Dilatation Catheter. 306 Non-compliant PTCA Balloon Dilatation Catheter, 6F KBT including sizes 3.5 mm diameter for all lengths, Diameter from 2-5mm and lengths from 6mm - 30 mm Soft Multi-layered Polyamide ,Trifold (2-5mm), Selective hydrophilic coating at distal shaft including balloon tip, Two platinum-iridium markers 307 Non-Compliant rapid exchange PTCA Balloon, with enhanced push ability, trackability and kink resistance, RBP 22 ATM, Average Burst Pressure of 30 atm; tip entry profile = 0.016”. Diameters 2.00mm, 2.25mm, 2.5mm, 2.75mm, 3.0mm, 3.25mm, 3.5mm, 3.75mm, 4.0mm, 4.5mm & 5.0mm-5.0 mm, lengths from 8mm, 10mm, 12mm, 15mm & 18mm 308 Non-Irrigated ablation catheter for 3 D mapping 309 Nucath wedge pressure catheter 310 OmniWire - Physiology Wire combines a unique solid core workhorse design with iFR proven outcomes and iFR Co-registration compatibility, with easy-to-use physiology throughout complex cases. Nitinol distal core increases durability and shape recovery. * Unique solid core improves torque and pushability. * Integrated conductive bands for greater signal reliability. 311 One Piece core wire with jointless Spring coil with slip coat coating over the spring coil tapering to .009, tip load 9g to 20g ,180cm length tip radiopacity 20cm( Conquest pro type) 312 Orbital Atherectomy device 6F compatible with 1.25mm diamond coated crown designed for bidirectional superficial calcium sanding and modify deep calcium through pulsatile forces to facilitates stent deluery and expansion in severely calcified lesions with durable nitinol guidewire with 0.12” proximal and 0.14” distal end along with viper slide lubricant. 313 Pacemaker and ICD Lead extraction catheter with lead locking system 314 Pacemaker Drape (87 in. x 135 in., SMS Fabric, AAMI Level-4) 315 Pacing lead -flexible type (bipolar) 316 Palmaz Stent for Aorta (Bare) 317 Paravalular leak closure device 318 Patch Electrode for hands off defibrillator 319 Patch Electrode for RF ablation 320 Patch electrodes for hands off defrillator 321 PDA Closure Deluery Cable (Accessories) (AGA type) 322 PDA Closure Deluery Cable (Accessories) (non-AGA type) 323 PDA Closure Deluery sheath (Accessories) (AGA type) 324 PDA Closure Deluery sheath (Accessories) (non-AGA type) 325 PDA Closure Device (AGA) nitinol 326 PDA Closure Device (AGA) stainless steel 327 PDA Closure Device (non- AGA type) 328 PDA coil deluery catheter 4F 329 PDA Occlusion (ADO II type) 330 Pediatric Introducer sheath available in 7.5cm, 5F-6F Atraumatic tapered tip minimizing vascular damage, enhanced pushability and flexibility, enlarged inner diameter for ultra smooth transition between dilator and sheath. lubricant coating and specially designed 331 Percutaneous Bi-caval valve system for treating tricuspid valve regurgitation, preloaded valves, dry tissue. 332 Percutaneous transcather mitral edge to edge repair. 333 Percutaneous Transcatheter Self-expanding intra-annular bovine tissue heart valve for Aortic Heart position available in sizes 23mm-29mm with low profile Deluery System, Unique Valve design with Intra-annular leaflets, Valves should have Anti-calcification treatment, Polyethylene fabric material with dynamic cuff that synchronizes with the cardiac cycle, Should have , EU-MDR, Canada and Japan approved 334 Perfusion balloon catheter designed for prolonged inflations while maintaining continuous distal blood flow. Semi-compliant balloon with a central perfusion lumen that preserves guidewire position and supports passage of secondary devices. Suitable for managing dissections, distal vessel work, and scenarios requiring extended inflation times. Nominal pressure - 6atm ,Rated burst pressure 8 atm with controlled, gradual deflation for procedural safety.Sizes: Balloon diameters 2.5–4.5 mm and lengths 20 mm; working length 143cm 335 Peripheral Angioplasty balloons (.035 wire compatible) 14-25 mm, Monorail type 336 PFO Closure Device 337 PFO closure device with cable 338 Polymer covered PTCA guide wirehavingstainless steel core (Should have a non-tapering distal tip; Should have a wires with varying tip loads between 0.8-1.2 gm; Should have a hydrophilic coating; Should have a full polymer covering; Should be available in variants having different shaft support) 339 Polymer free Sirolimus Eluting Coronary Stent with Co-Cr Platform having Microporous surface, abluminal coating and shellac resin with diameters of 2.0 mm to 4.0 mm of varying length. Entry profile 0.016 340 PTCA balloon less than 0.016 tip profile low profile rapid exchange semi-compliant balloon with with RBP of at least 14 ATM with 2.3 F shaft. Dia 1.00mm, 1.25mm, 1.50mm, 1.75mm, 2.00mm, 2.25mm, 2.50mm, 2.75mm, 3.0mm, 3.25mm, 3.50mm & 4.00 mm and lengths from 5mm, 10mm, 15mm, 20mm & 30mm. 341 PTCA guide wire having extra support shaft with floppy tip (Should be available in both routine and exchange lengths) 342 PTCA guide wire having jointless distal spring coil(Should have one piece core wire withjointless distal spring coil; Should have hydrophobic coating over the distal wire; Should have a non-tapering distal tip; Should have a tip load of less than 0.8 gm; Should not have any polymeric cover) 343 PTCA guide wire having regular shaft support with floppy tip (Should be available in both routine and exchange lengths) 344 PTCA guide wire having stainless steel core dedicated for chronic total occlusion having tapering distal tip (Should not have any polymer coating) 345 PTCA guide wire with floppy tip having multiple markers for measuring the length of stenotic segment 346 PTCA Guide Wire – 2 mm Silicon coated distal tip, 0.014” Diameter and 180 cm length PTCA wire. Must have Platinum coil at distal tip.Should have M coat hydrophilic coating upto 248 mm, Wire Should have PTFE Coating from 25 to 180 cm length.Should be Available in 0.6 gf, 1gf & 3.6gf tip loads 347 PTCA guide wires dedicated for chronic total occlusion having tip load of 1-2 gm 348 PTCA Guiding Catheter * Large lumen Guiding catheter, all curves 5F-8F, promenent radio opque marker,Double wire stainless steel brading, PTFE inner Lining 349 PTCA high pressure, non compliant balloon with an RBP of 22 ATM and Mean Burst Pressure of 30 ATM with most quarter sizes starting from 2.0 mm to 5.00 mm diameter and 8.0 mm to 18.0 mm length, dual slider and eel hydrophilic coating, pole vault design hypotube, 350 PTCA Non Compliant Balloon Dialation Catheter, Rapid Exchange.5F compatible. Usable catheter length 142 cm. Having a monolithic deluery system with hydrophillic & lubricious coating. Crossing profile 0.60 to 1.50 mm . Nominal pressure 7Atm , RBP 16 Atm. 351 PTCA Non-Compliant Balloon Dilation Catheter, Rapid Exchange. Distal tip to have hydrophilic coating for better deluerability (I glide technology). proximal shaft to have a hypotube and micro-coiling for enhanced pushability (I-coil technology).Balloon material to have I twin technology to reduce crossing profile enhancing deluerability. 352 PTCA Scoring Balloon Catheter with tapered tip and three nitinol, helical shaped, electropolished scoring elements with rectangular edges, mounted on a balloon with a larger working range of 2 ATM - 20 ATM and available in sizes from 2.0mm, 2.5mm, 3.0mm, 3.5mm Diameters and in lengths from 6mm, 10mm & 15mm. 353 PTCA Semi Compliant Balloon Dialation Catheter, Rapid Exchange.5F compatible. Usable catheter length 142 cm. Having a monolithic deluery system with hydrophillic & lubricious coating. Crossing profile 0.60 to 1.50 mm . Nominal pressure 7Atm , RBP 16 Atm. 354 PTCA Semi Compliant Balloon Dilation Catheter, Rapid Exchange. DCGI approved, Having a guide catheter compatibility of 5F and max guidewire compatibility of 14F.Usable catheter length 142 cm.Distal tip to have hydrophilic coating for better deluerability (I glide technology). proximal shaft to have a hypotube and micro-coiling for enhanced pushability (I-coil technology).Balloon material to have I twin technology to reduce crossing profile enhancing deluerability. 355 PTCA semi compliant balloon with most quarter sizes from 1.0 mm to 4.00 mm diameter and 5.0 mm to 30.0 mm length, dual slider and eel hydrophilic coating, pole vauit design hypotube; CE, US FDA and Japan FDA approved. 356 PTCA Semo compliant CTO Balloon with Ultra Low Entry profile of 0.016 with hydrophilic coating for superior crossability. RED closed tip with easy recognition. smallest diameter of 1.00mm and 5mm length, Shorter and Thinner radiopaque marker for lower crossing profile (Length of 0.8mm and thickness of 25µm), Flexible Tip with short balloon bonding part of 0.4mm. 357 PTCA wire 0.9gm tip stiffness,spring coil,.014 tip diameter,0.25mm core diameter, stainless steel, hydrophilic, DOC extension, 358 PTCA wire 1.1gm tip stiffness,spring coil,.014 tip diameter,0.2mm core diameter, stainless steel, hydrophilic,DOC extension, 359 PTCA wire (extra support), all lengths 360 PTCA wire (medium support), all lengths 361 PTCA wire 0.5gm tip stiffness,Core to tip, 0.014 tip diameter,4cm Tip Radiopacity,20cm tip length, stainless steel, hydrophilic,DOC Extension, polymer tip, 362 PTCA wire 0.8gm tip stiffness, spring coil, 0.014 tip diameter,3cm Tip Radiopacity,0.18mm core diameter, stainless steel, hydrophilic,DOC extension, 363 PTCA wire 0.9gm tip stiffness,Core to tip, 0.014 tip diameter,3cm Tip Radiopacity,17cm tip length, stainless steel, hydrophilic,DOC Extension, polymer tip, 364 PTCA wire 1.2gm tip stiffness,Core to tip, 0.014 tip diameter,4cm Tip Radiopacity,24cm tip length, stainless steel, hydrophilic,DOC Extension, polymer tip, 365 PTCA wire 1.5gm tip stiffness,Core to tip, 0.009 tip diameter,3.5cm Tip Radiopacity,18cm tip length, stainless steel, hydrophilic,DOC Extension, polymer Jacketed tip, 366 PTCA wire 10gm tip stiffness,Core to tip, 0.008 tip diameter,3.5cm Tip Radiopacity,15cm tip length, stainless steel, hydrophilic,High Penetration force,DOC Extension, polymer Jacketed tip, 367 PTCA wire 14gm tip stiffness,Core to tip, 0.008 tip diameter,3.5cm Tip Radiopacity,15cm tip length, stainless steel, hydrophilic,High Penetration force,DOC Extension, polymer Jacketed tip, 368 PTCA wire 2.1gm tip stiffness,Polymer tip, 0.014 tip diameter,3.5cm Tip Radiopacity,0.17mm core diameter, stainless steel, hydrophilic,polymer tip, 369 PTCA wire 2gm tip stiffness,Polymer tip, 0.014 tip diameter,3.5cm Tip Radiopacity,0.25mm core diameter, stainless steel, hydrophilic,polymer tip, 370 PTCA wire floppy, intermediate, standard types with difrent tip loads) M Coat technology( Runthrough all type) 371 PTCA Y connector 400 Kpa leak-proof seal from proprietary designed valve, 7F-9f compatible lumen allowing deluery of wide range of devices and torque and introducer fit 0.014-0.021 guide wire. 372 PTFE Precoated wire. In diameter 0.035 inches. Length 150 cm and 260 cm long. Available as straight & Angled tip. DCGI Approved 373 PTMC Balloon with Kit Specially Designed balloon,perfectly shaped to for the mitral valve,Short inflation/deflation cycle,New small and soft tip,Large size matrix, Longer guide wire to increase safety in taller patients Having three lumen for extra safety triple layer for better strength from 20mm to 30mm 374 PTMC Balloon with Kit Specially Designed balloon,perfectly shaped to for the mitral valve,Short inflation/deflation cycle,New small and soft tip,Large size matrix, Longer guide wire to increase safety in taller patients Having three lumen for extra safety triple layer for better strength from 20mm to 30mm 375 Pulmo-Congenital Bovine Pericardium Tri - leaflet Valve, Nickel Cobalt Alloy Frame with Hybrid honeycomb cell design having frame height of 17mm-20mm with 100% External and internal skirting. Navigator balloon with proximal and distal Stoppers and proximal, middle and distal markers/ 14 Fr Python Expandable introducer sheath with one-way haemostatic valve 376 Pulmonary artery Catheter (Right Heart Catheter) :- Pulmonary Baloon tipped artery Catheter(Right Heart Catheter) having 3 Port from 5Fr to 8Fr with working length of 110cm 377 Quadripolar catheter (Deflectable) 378 Quadripolar catheter (Fixed curve) 379 Quadripolar catheter (Woven) 380 Radial access sheath outside 6F inside 7F (thin wall glide sheath) 0.25 wire compatible 381 Rapid Exchange (Rx), Coronary Intravascular Lithotripsy Catheter System (Semi Compliant) for treating Severely calcified stenotic de novo coronary arteries with 80 pulses and 2 emitters. Having Guide Catheter Compatibility of 6F and Hydrophillic distal shaft coating from distal balloon base up to Rapid Exchange port . Should have a handsfree operation with foot pedal/Switch option Balloon Diameter (mm): 2.5, 7.75, 3.0, 3.25, 3.5, 3.75, 4.0 Balloon Working Length (mm): 12 382 Rapid Exchange non- Complaint PTCA Balloon with Low (<0.018)Lesion entry profile Size Diameter 2.0mmto 5.00 mmand length 8mm to 30 mmwith RBP>= 20atm Patch work coating for guide and grip with SCPand unique EFT Technology 383 Rapid Exchange PTCA Balloon Semi Compliant with <=0.017lesion entery profile with unique Enhanced force Technology Size 1.25mm to 4.00 Mm diameter and length 6-30 mm 384 Refinity– Rotational IVUS Catheter IntraSight compatible next generation rotational IVUS catheter. exceptional deluerability, to navigate through challenging lesions with ease. With 5F guide compatibility, it enables radial access 45 MHz high resolution image, it creates clear, crisp images for accurate vessel interpretation and lesion assessment. 385 Reflexon Spiral catheter 386 Regular Workhorse Guidewire with Tapered Elastinite Nitinol Core, Durasteel Ribbon Tip and available in both hydrophilic and hydrophobic coatings between tipload 0.5-0.7gm 387 Regular workhorse guidewirewithtapered tip available in both hydrophilic andhydrophobic coating with tip load of 0.5-0.7 gram 388 Renal Artery Stents All sizes 389 Renal RDC catheter GC compitable for Medtronic 390 Renal RDC GC compitable for Medtronic 391 Renal stent balloon expandable 392 Rot ablation catheter Rota pro- Pre-Connected exchangeable burr catheter and burr advancing devices designed to allow the catheter to be separated from the advancer to allow multiple catheters with various burr sizes to be attached to a single advancer during a procedure, easy to use controls- Incorporated on the advancer. Hybrid Harness-Improved cable management. Catheter length 13.5cm, available burr sizes- 1.25mm, 1.5mm, 1.75mm, 2.0mm, 2.15mm, 2.25mm, 2.38mm and 2.5mm All sizes 393 Rot ablation wire- Rot ablation guide wire (Rota wire drive) with outer diameter of 0.009, total length of 330cm, spring tip with 2.2cm length and tip diameter of 0.014, transition length of 13 cm, more flexible and torque able with one- piece core wire. 394 Rota Burr size from 1.5mm to 2.5mm 395 Rota burr size range from 1.25mm to 2.5mm 396 Rota Guidewire for intraluminal treatment of chronic total occlusion at 0.018/0.46 mm in diameter, diamond coated tip 397 Rota link catheter burrs, multiple sizes 398 Rota wire drive with 0.009 outer diameter, 330cm length, 0.014 tip diameter, 13cm transition length,more flexible and torqueable with one piece core wire technology 399 Rota wire extra support, 0.009 outer diameter, 330cm length, 0.014 tip diameter, 5cm transition length,Gives more support 400 Rota wire with 0.009 outer diameter, 330cm length, 0.014 tip diameter, 13cm transition length,more flexible and torqueable 401 Rotational atherothrombectomy catheter-Rotational atherethrombectomy catheter for removal of thrombus and atheroma to treat native vessels, stenosed stent and stent grafts and bypass grafts from acute to chronic materials, system that comes in 3 sizes 6F, 8F and 10F to treat vessels from 3-12mm available in catheter lengths 110cm, 135cm and 85cm in combination of guide wire, collecting bag and sterile drape.-Size 6F, 8F, 10F; catheter length 110cm, 135cm, 85cm 402 Safari Wire for TAVI ESC, SC, LC 403 Savvy sensor guided TAVI wire for pacing & haemodynamic 404 Self-expanding nitinol stent frame with bovine pericardial leaflets and dual-layer PET sealing skirt for paravalvular leak reduction; fully retrievable with a motorized deluery system enabling precise deployment control; compatible with low-profile integrated deluery sheath 405 Self-expanding, self-centering double-disc occluder, Platinum coating of using nano fusion technology,Polypropylene fabric sewn inside the occluder device, Available in 6 sizes, 5 sizes (18/18, 25/18, 25/25, 30/25, 30/30 mm) which are 8F compatible and 1 size (35/25 mm) which is 9F compatible,6F deluery cable available in individual packaging 406 Semi compliant balloon 2-4mm diameter, length *9,12,15,20,25,30, 0.017 tip entry profile,Bio Slide Coating,140cm length 407 Semi compliant balloon, diameter from 1.0mm to 4.0mm diameter with 5-30 mm leangth, soft rounded tip and trifold technology and 0.16inch crossing profile 408 Semi Compliant PTCA balloon with slim seal technology on distal tip, lesion entry profile of 0.017”, crossing profile of 0.021 and microglide coating available in diameter 2.25-5.00mm and lengths 6-30mm 409 Semi Compliant PTCA balloon with slim seal technology on distal tip, lesion entry profile of 0.017”, crossing profile of 0.021” and single flexible tungsten marker available in unique diameter of 1.2 mm with variety of lengths. 410 Semi Compliant, balloon, 1.2,1.5,1.2Push,1.5Push,2-4mm dia*8,12,15,20,30 length,0.017tip entry profile,0.026 Crossing Profile,hydrophilic coating,143cm length, Monorail Catheter,Z glide coating 411 Semi-complaint coronary Balloon with Slim Seal Technology on distal tip and tip entry profile<=0.017” available in diameter 1.2mm -5.00mm and lengths 6-30mm, OTW System 412 Semi-complaint PTCA balloon with smallest entry profile of 0.0157, Tapered balloon shape, unique tri-fold wrapping technology, TR2 hydrophilic coating; Available in lowest profile 1 mm diameter, Longer shaft length of 146cm. 413 Semi-compliant coronary balloon catheter designed for enhanced deliverability, superior crossability, and controlled dilatation performance. Built with Fulcrum™ Lite material, low-profile shaft, and optimized balloon folding 414 Semi-compliant PTCA Balloon Dilatation Catheter ,6F KBT including sizes 3.5 mm diameter for all lengths, Diameter(mm): 2.00,2.25,2.50,2.75,3.00,3.50,4.00 & 4.50.,Length (mm): 9,12,15,20,25,30,Soft Multilayered Polyamide ,Two platinum -iridium markers ,Shaft length = 138 cm. 415 Seventh-generation Ridaforolimus eluting coronary stent featuring a unique stent design which utilizes a distinctive CoCr framework composed of struts with varying widths and integrates radiopaque markers into its structure. Furthermore, the stent features a specialized radiopaque enhanced metal spring tip designed for navigating through complex anatomie 416 Sirolimus Drug Eluting Cobalt-Chromium stent with ultrathin struts and a hybrid double-coating system.Passive proBIO amorphous silicon-carbide coating with active BIOlute biodegradable PLLA drug matrix.Rapid-exchange deluery system.Available diameters 2.25–4.0 mm with corresponding ultrathin strut thickness (60–80 µm). 417 Sirolimus Drug Eluting stents with Cobalth cromium platform having ultrathin struts and Biodegradable polymer with passive Pro Bio Coating and Active Biolute coating. 418 Sirolimus eluting Bioresorbable Vascular scaffolding system with 100 µm strut thickness, Novel Hybrid Cell design, Couplet of tri-axial platinum RO markers at proximal and distal ends of the scaffold and .1 mm Balloon Overhang. 419 Sirolimus eluting Cobalt chromium with Albuminal In- Groove design stent& Biodegradable polymer strut Thickness (86-100) microns 420 Sirolimus eluting Cobalt chromium with Hybrid Design stent& PLA-PGLA dual biodegradable & Biocompatible polymer for optimum drug Deluery strut thickness 65 microns 421 Sirolimus Eluting CObalt Chromium coronary stent diameter from 2.00 to 4.5 mm, including High Bleeding Risk (HBR) patients with 30 days DAPT. 422 Sirolimus Eluting Coronary Stent System with Biodegradable Polymer on Cobalat-Chorimum Platform available in longer length up to 52mm Open Cell Design with strut thickness of 60µm. Must having over-expansion limit 423 Sirolimus eluting coronary stent system, Cobalt-chromium platform with strut thickness of 65 µm,biodegradable and biocompatible polymer, hybrid cell design and monolithic deluery system 6F guide catheter compatible with diameter available from 2.0 mm to 4.5 mm and length available up to 48 mm. 424 Sirolimus Eluting Stent Cobalt-Chromium stent with Abluminal Coating and specialised Gradient coating (Bioresorbable polymer of PLCL (Poly Lactic Acid + Poly Capro lactone PCL) with degradation time of 3-4 months. low concentration of Sirolimus (0.8ug/mm sq.),Should have Bioinspired Open cell in phase design. minimum tip entry profile of 0.42mm 425 Sirolimus Eluting Stent Cobalt-Chromium stent with Co-Cr Platform, Bioresorbable polymer and Sirolimus Drug with Abluminal and Gradient Coating mounted on low profile balloon with entry profile 0.018” Available in 3 platforms specifically designed to meet the needs of each vessel size. Optimised overexpansion capability Upto 6.25 mm for 3.5 mm to 4.5 mm stents. 426 Sirolimus eluting stent, Nickel free (Vasculoy) platform with hybrid design and biodegradable polymer, Strut thickness of less than 85 micron, Radio-opaque markers on proximal and distal ends for enhanced visibility 427 Sirolimus-Eluting Cobalt Chromium Coronary Stent System, Drug Eluting stent with Open Cell Design only with two interlinks between the rings through the length of the stent, L-605 Co-Cr Alloy with Laser cut seamless tubing in a serpentine pattern, Crossing profile of = 1 mm for 3 mm diameter, LDZ Link: Long Dual ‘Z’ Link, Length (mm): 8 to 48 mm , Diameter(mm): 2.0 to 4.50 mm (more SKUs the more is the preference) 428 Sirolimus-eluting resorbable magnesium scaffold with thin struts and BIOlute biodegradable polymer coating.Constructed from BIOMag magnesium alloy providing durable radial support with a controlled resorption time of ~12 months.Strut thickness: 99 µm (2.5 mm), 117 µm (3.0–3.5 mm), 147 µm (4.0 mm). Integrated tantalum markers for improved visibility and precise positioning. Designed for complete vessel support during early healing, followed by full bioresorption. 429 Sizing Balloon for Clouser Device Double Lumen balloon catheter with radio opaque marker bands to allow for radiographic measurement. Width of marker band is 1mm Balloon Diameter should be 24mm & 34mm 430 Slender Sytem Sheath with 7 F Inner Diameter & Outer Diameter with 6 F (Thin Wall Sheath Terumo Type) All Lenghths (5 F ,6F & 7F) 431 Special PTCA Balloon for CTO Lesions starting diameter 0.85mm with RBP 16 atm or above, Low Entry Tip Profile Equal to or less than 0.015”. Balloon Hypotube must be Stainless Steel along with having Spiral-Cut design. Extended Guide wire lumen 30cm 432 Specialised proximal optimisation balloon dilatation catheter with ultra short balloon shoulder of 0.6mm and an RBP of 22 atm with sizes ranging from a length of 6-15 mm and diameters ranging from 2.25-5 mm. Hydrophilic external surface coating from tip to adjacent guidewire port and silicone coating inside guidewire lumen. 433 stainless steel core workhorse PTCA guidewire with extra support with soft/floppy tip 175-190 cm 434 Stainless Steel Guidewire with Stainless Steel coils and hydrophilic coating availabe in tipload of 1gm with radioapaque tip of 3cm 435 Sterile Disposable Plastic Balloon for TAVI ZMED 436 Sterile pacemaker pocket Compression devices 437 sterile transparent cover for long wires and catheters 438 Sting Ray Balloon for CTO (coronary) 439 StingRay Device for CTO 440 Subcutaneous ICD (Single chamber MRI safe) 441 Subcutaneous ICD (Single chamber) 442 Swartz Introducer Sheath with hemostatic valve for Left Sided 443 Swartz Introducer Sheath with hemostatic valve for Right Sided 444 Syringe Pressure Injector 180ml/Art 700 445 Tapered Sirolimus Eluting stent system of 65 µm strut thickness with biodegradable polymer, Hybrid Cell Design for long and diffused coronary arteries. 446 Temporary pacing lead balloon tipped. 447 Temporary pacing lead non balloon tipped 448 The transcatheter edge-to-edge valve repair system for percutaneous treatment ofIntuitive control mechanism for simplified and precise procedural handling, Integrated auto-locking mechanism to avoid repeated locking and unlocking during clip deployment, Accurate angular adjustment to optimize clip positioning under echocardiographic guidance. 449 Thrombus Extarction Device with rotational Cutting 450 THV Crimping Tool, used to crimp valve on the Balloon 451 THV Deluery System, over-the-wire system available in useable length of 30mm & 35mm with various balloon diameters. 452 Tiger curved Diagnostic Catheter 5f, large inner lumen.Superior kink resistance,1-to1 torque,Atraumatic soft ,Max pressure upto 1200psi 453 Torque device (.035 and .014) 454 Transcatheter Aortic Heart Valve system of size 23-34MM with Self Expanding, Supra annular, Recapturable Porcine Pericardium leaflets Nitinol Frame valve with external skirt, 3 markers on the commissures and compatible Delivery system with Single Spine Shaft and loading system. 455 Transcatheter Aortic Heart Valve system of size 23-34MM with Self Expanding, Supra annular, Recapturable Porcine Pericardium leaflets Nitinol Frame valve with external skirt, 3 markers on the commissures and large cells for future coronary access and compatible Deluery system with Single Spine Shaft and loading system( Evolute Fx+) 456 Transcatheter aortic valve - self-expanding frame made of bovine pericardium with a supra-annular design treated with proprietary anti calcium treatment, extended internal sealing skirt, sizes - 22, 26 and 30 mm with two rows of RO markers on valve frame for implantion guidance., Cell designs having > or equal to 15 Fr for coronary access. Valve deluery system having Transparent capsule and flexible shaft for ease of deluerability, crimped over the deluery system prior to insertion into the patients vasculature, 0.035 wire compatible, 14 & 15 Fr equivalent in-line sheath deluery system and should be compatible for femoral artery size ranging from 5 mm to 7 mm 457 Transcatheter Aortic Valve (TAVI) Edward (Baloon expandable type) 458 Transcatheter Aortic Valve (TAVI) EVOLUTR-23 -31 Medtronic 459 Transradial band 460 Two in one device, Guide-extension with trapping capabilities, Trapping balloon positioned proximal to the half-pipe channel, pushrod,Gold marker band under proximal end of balloon, Hypotube pushrod, Half pipe channel, Hydrophillic coating, coil reinforeced guide extension, Radio-opaque marker 2mm from distal tip & 4mm from collar, White positioning markers at 95cm & 105cm , Sizes - 6F, 7F & 8F , Working length - 150cm, 13cm Rapid exchange length, Nominal pressure - 12atm, Rated burst pressure - 14 atm , Trapping Balloon length - 11mm, 3.1 mm unrestricted balloon OD. 461 Ultra High pressure plaque modification device-Dual layer/ RBP 35 bars/ strictly non-compliant (only 10% growth)/ andFor super high pressure PTCA, a Manometer of 55 atm444 Syringe Pressure Injector 180ml/Art 700 445 Tapered Sirolimus Eluting stent system of 65 µm strut thickness with biodegradable polymer, Hybrid Cell Design for long and diffused coronary arteries. 446 Temporary pacing lead balloon tipped. 447 Temporary pacing lead non balloon tipped 448 The transcatheter edge-to-edge valve repair system for percutaneous treatment ofIntuitive control mechanism for simplified and precise procedural handling, Integrated auto-locking mechanism to avoid repeated locking and unlocking during clip deployment, Accurate angular adjustment to optimize clip positioning under echocardiographic guidance. 449 Thrombus Extarction Device with rotational Cutting 450 THV Crimping Tool, used to crimp valve on the Balloon 451 THV Deluery System, over-the-wire system available in useable length of 30mm & 35mm with various balloon diameters. 452 Tiger curved Diagnostic Catheter 5f, large inner lumen.Superior kink resistance,1-to1 torque,Atraumatic soft ,Max pressure upto 1200psi 453 Torque device (.035 and .014) 454 Transcatheter Aortic Heart Valve system of size 23-34MM with Self Expanding, Supra annular, Recapturable Porcine Pericardium leaflets Nitinol Frame valve with external skirt, 3 markers on the commissures and compatible Delivery system with Single Spine Shaft and loading system. 455 Transcatheter Aortic Heart Valve system of size 23-34MM with Self Expanding, Supra annular, Recapturable Porcine Pericardium leaflets Nitinol Frame valve with external skirt, 3 markers on the commissures and large cells for future coronary access and compatible Deluery system with Single Spine Shaft and loading system( Evolute Fx+) 456 Transcatheter aortic valve - self-expanding frame made of bovine pericardium with a supra-annular design treated with proprietary anti calcium treatment, extended internal sealing skirt, sizes - 22, 26 and 30 mm with two rows of RO markers on valve frame for implantion guidance., Cell designs having > or equal to 15 Fr for coronary access. Valve deluery system having Transparent capsule and flexible shaft for ease of deluerability, crimped over the deluery system prior to insertion into the patients vasculature, 0.035 wire compatible, 14 & 15 Fr equivalent in-line sheath deluery system and should be compatible for femoral artery size ranging from 5 mm to 7 mm 457 Transcatheter Aortic Valve (TAVI) Edward (Baloon expandable type) 458 Transcatheter Aortic Valve (TAVI) EVOLUTR-23 -31 Medtronic 459 Transradial band 460 Two in one device, Guide-extension with trapping capabilities, Trapping balloon positioned proximal to the half-pipe channel, pushrod,Gold marker band under proximal end of balloon, Hypotube pushrod, Half pipe channel, Hydrophillic coating, coil reinforeced guide extension, Radio-opaque marker 2mm from distal tip & 4mm from collar, White positioning markers at 95cm & 105cm , Sizes - 6F, 7F & 8F , Working length - 150cm, 13cm Rapid exchange length, Nominal pressure - 12atm, Rated burst pressure - 14 atm , Trapping Balloon length - 11mm, 3.1 mm unrestricted balloon OD. 461 Ultra High pressure plaque modification device-Dual layer/ RBP 35 bars/ strictly non-compliant (only 10% growth)/ andFor super high pressure PTCA, a Manometer of 55 atm 462 Unique spiral balloon with anti slip spiral technology for programed dilatation 463 Valvuloplasty balloon Numed type (Dumbell shape) 464 Valvuloplasty balloon Tyshak type 0.25 system 465 Valvuloplasty balloon Tyshak type 0.35 system 466 Verrata (Pressure Guide Wire) 467 Volcano/Philips IVUS Catheter 468 VSD Closure Device (Muscular type) 469 VSD Closure Device (Peri- membranous type) 470 VVI ( R ) MRI safe Without life warranty 471 VVI ( R ) non MRI safe With life warranty 472 VVI ( R ) non MRI safe Without life warranty 473 VVI MRI safe With life warranty 474 VVI MRI safe Without life warranty 475 VVI Non MRI safe Economic version With life warranty 476 VVI non MRI safe Economic version Without life warranty 477 wearable defibrillator 478 Wiggle Wire 479 Wire Tip deflecting catheter (Ventura) 480 Wireless FFR Guidewire, 175cm, 0.014 Guidwire,high-fidelity piezo electric pressure sensor technology, mulitiple large windows(multi window), radio-opaque tip, radio range of atleast 2m, battery time atleast 3 hours, wireless frequency range 2.4000-2.4835GHz 481 Wolverine-Cutting balloon with 2-4mm dia*6,10,15mm length,Non Compliant balloon mounted with microsurgical3/4 stainless steel atherotomes, Non compliant, 143 cm length, Monorail Catheter,Bi- Segment inner lumenshaft, 1.8 fr, Zglide hydrophilic coating, ,CE,DCGI 482 Workhorse Guidewire with Triple spring 304V stainless steel with NiTi Distal core and cold working rotary swagging tip available in tiploads between 0.6-0.8gm and lengths (190/300cm ) 483 XP ref patch for 3D mapping 484 Y Connector - large lumen 10F (okay 2 type) 485 Zotarolimus eluting drug eluting Stents DES with cobolt alloy with platinum iridium core

Contact Information