|
Fence Masonry With Concrete Block, Esp. 19Cm, With Apparent Finish, Including Mortar For Laying, Esp. 14Cm, Fence Masonry With Perforated Ceramic Brick, Esp. 9Cm, For Cladding, Laying Of Railings Or Metal Gates Made Of Steel Or Iron, Exclusive Supply (Laying Of Sliding Gates), 23/01/2026 - 14:54:47, Manual Loading Of Material Of Any Nature Onto A Truck, Exclusive Of Transport, Roughcast With Mortar, Ratio 1:2:3 (Cement, Sand And Gravel), Applied With Spoon, Esp. 5Mm, Including Mortar With Mechanized Preparation, Cutting, Bending And Assembly Of Ca-50 Steel, Diameter 10Mm, Including Spacer, Bending And Assembly Of Ca-60 Steel, Diameter (4.2Mm To 5.0Mm), Junior Civil Engineer (Hourly), Manual Excavation Of Trench With A Depth Of Less Than Or Equal To 1.5M, Including Side Discharge, Concrete Drill Stake, 30Cm Diameter, Manual Excavation With Shell Auger, With Starter Reinforcement. Af05/2020, Shaping And Unshaping Of Boards And Battens, Exclusive Of Shoring, Reuse (3X), Supply Of Structural Concrete, Prepared On Site, With Fck 20Mpa, Including Laying, Densification And Finishing, Final Cleaning For Delivery Of The Work, Mobilization And Demobilization Of The Work In An Urban Center Or Bordering Region With Value Up To The Value Of 1,000,000.00., Dividing Wall In Concrete Block With Coated Finish, Width 15Cm, Height Of 220Cm, With Footing In Reinforced Concrete, Size (50X55)Cm, Shaped Against A Cliff, Including Excavation With Transport And Removal Of Excavated Material (In Bucket), Drip Tray In Concrete, Plaster/Plaster With Mortar (Cement And Sand) And Painting In Two (2) Coats, 20 Mpa Exposed Concrete Pillar, Including Frame, Plasticized Shape And Unmolding, Acrylic Paint On Wall, Two (2) Coats, Including One (1) Coat Of Spackle (Pva), With Manual Application, Exclusive Acrylic Sealer, Painting Solvent-Based Enamel On Iron Frames, With Manual Application, Including One (1) Coat Of Anti-Corrosive Primer, Concrete Floor Prepared On Site With A Concrete Mixer With Fck Of 13.5Mpa, Without Reinforcement, Rustic Finish, Esp. 8Cm, Including Supply, Laying, Densification, Slatting, Excluding Expansion Joint, Brushed Steel Sheet Plate, Dimensions (25X12)Cm, Including Fixing -, Sliding Gate Made Of Sheet Metal Panel Type Square Lambril Panel, With Complete Social Door Included, With Frame, Natural Finish, With Rails And Pulleys, Gate In Galvanized Steel Sheet, Lambril Type, Esp. 1, 25Mm (Gsg-18), With Frame In Steel Tube (50X30)Mm, 25Mm, Exclusive Padlock And Painting, Preparation For Plastering Or Painting (Latex/Acrylic) On Wall, Including One (1) Coat Of Acrylic Sealer, Plastering With Mortar, Ratio 1:7 (Cement And Sand), Esp. 20Mm, Manual Application, Exclusive Of Sheet Metal, Door Removal, Manually, Without Reuse. Af09/2023, Removal Of Siding/Metallic And Wooden Sheets, Transportation Of Material Of Any Nature By Truck, Distance Greater Than 10Km And Less Than Or Equal To 20Km, Within The Urban Perimeter, Exclusive Of Cargo, Including Unloading, Lintel Or Girder In Structural Concrete For Spans Of Up To 150Cm Prepared On Site With Concrete Mixer, Control A With Fck 20Mpa, Molded In Place Including Frame
|
