Tender For Supply Of Tools, Instruments, Safety Equipment And Workshop Accessories To The Office Of The Assi ... in India

Work Detail

Supply Of Tools, Instruments, Safety Equipment And Workshop Accessories To The Office Of The Assistant Executive Engineer (Agri), Wayanad , List Of Tools And Machineries , Tee Spanner Set Including Spanners Ranging From 8 Mm To 19 Mm Made From Chrome Vanadium Steel (Cr- V), Hardened And Tempered For Durability, The Handle Shall Be T-Shaped, Providing Maximum Torque And Grip And Surface Finish Shall Be Nickel-Chrome Plated For Corrosion Resistance. , Deep Socket Set Consist Of Sockets From 8 Mm To 22 Mm, Made Of Chrome Vanadium Steel, Fully Hardened, Tempered, And Chrome-Plated, The Sockets Shall Have Six-Point Or Twelve-Point Configurations For High Torque Applications, Suitable For Use With Ratchet Handles And Extension Bars. , Locking Plier (Vice Grip Type) 10" With Drop-Forged Steel Jaws With Heat-Treated Teeth For Firm Gripping, Include An Adjustable Screw And Quick-Release Lever, Nickel-Plated Surface For Corrosion Protection. , Long Nose Plier 6" Made Of Forged Alloy Steel With Slim Tapered Jaws For Precision Gripping And Cutting In Confined Spaces, 6" Overall Length, With Insulated Handles. , Long Nose Plier 8" Made Of Forged Alloy Steel With Slim Tapered Jaws For Precision Gripping And Cutting In Confined Spaces, 8" Overall Length, With Insulated Handles. , Adjustable Pipe Wrench Suitable For Gripping Pipes Up To 75 Mm Diameter Made Of Cast Iron Body With Drop- Forged Steel Jaws, Serrated And Induction-Hardened And Handle Painted Or Powder-Coated. , Heavy-Duty Pipe Wrench With Jaw Opening Up To 110 Mm Made Of Forged Alloy Steel, Precision-Machined Teeth For Firm Grip, Designed For Mechanical And Plumbing Use. , Heavy-Duty Filter Wrench With High-Tensile Rubber Or Nylon Strap And Steel Handle For Removing Large Oil/Fuel Filters, Handle Length: Minimum 300 Mm. Suitable For Heavy Machinery Maintenance. , Medium-Duty Filter Wrench With Adjustable Steel Band And Handle, Suitable For Medium-Sized Oil Filters. Chrome-Plated Finish With Non-Slip Grip. , Soft Face Hammer With Dual Rubber Striking Faces To Prevent Surface Damage. Head Weight Approx. 300–500 Gm, Handle Made Of Fiberglass , Non-Marring Mallet Hammer With Rubber Or Plastic Head 40 Mm And Sturdy Handle. Head Weight Approx. 1 Kg. Suitable For Precision Fitting Without Metal Deformation. , Cold Chisels Made Of Chrome Vanadium Or Carbon Steel (18 Mm Dia Approax) , Hardened And Tempered To 58–60 Hrc. Size 25 Mm, Length 300 Mm, Approax Weight 500 Gm Ground Cutting Edge With Anti-Slip Striking End. , Steel Wedges, Hardened And Ground, Used For Splitting Or Aligning. Made Of Forged Alloy Steel With A Rust- Resistant Finish 230 Mm Length 1.5 Kg. , Adjustable Torque Wrench With Working Range 25–135 Nm. Drive Size 3/8" Or 1/2", Accuracy ±4% Of Indicated Value With Reversible Ratchet And Quick- Release Mechanism. , Heavy-Duty Adjustable Torque Wrench, Range 70–340 Nm. 1/2" Drive, Accuracy ±4%, Chrome Vanadium Construction With Calibration Certificate. , High-Capacity Torque Wrench, Range 135–540 Nm. 3/4" Drive, Accuracy ±4%, Knurled Handle For Non-Slip Grip, Supplied With Protective Case And Calibration Certificate. , Steel Scale Set (5 Nos) Made Of High-Quality Tempered Stainless Steel With Etched And Permanently Engraved Graduations In Both Metric (Mm/Cm) And Inch Units. Straight, With Accurately Ground Edges And Smooth Surfaces, Graduation Accuracy Shall Conform To Is 1481:1970 Or Equivalent. Lengths : 150 Mm, 300 Mm, 600 Mm, 450 Mm, 1000 Mm. Each Scale Shall Have Clear Visibility Markings And Corrosion-Resistant Satin Chrome Finish. , Vernier Calipers Made Of Stainless Steel, Precision- Ground And Finished, With A Measuring Range Of 0–200 Mm And Least Count 0.02 Mm / 0.001 Inch Capable Of Internal, External, Depth, And Step Measurements. Vernier Scale And Main Scale Markings Shall Be Clearly Etched For Long-Term Readability. The Instrument Shall Conform To Is 3651:1981 Or Din 862 Standards. A Locking Screw Shall Be Provided For Measurement Retention, And The Tool Shall Be Supplied In A Protective Case. , Outside Micrometer (0–25 Mm Range) Of Mechanical Analog Type, Conforming To Is 2967:1975 Or Din 863 Standards. The Frame Shall Be Rigid And Heat-Insulated, With Carbide-Tipped Measuring Faces, A Friction Thimble, And A Ratchet Stop For Consistent Measuring Pressure. The Least Count Shall Be 0.01 Mm, And The Thimble And Sleeve Shall Have Clearly Graduated Markings. The Micrometer Shall Be Supplied With A Setting Standard And Calibration Certificate. , Outside Micrometer (25-50 Mm Range) Of Mechanical Analog Type, Conforming To Is 2967:1975 Or Din 863 Standards. The Frame Shall Be Rigid And Heat-Insulated, With Carbide-Tipped Measuring Faces, A Friction Thimble, And A Ratchet Stop For Consistent Measuring Pressure. The Least Count Shall Be 0.01 Mm, And The Thimble And Sleeve Shall Have Clearly Graduated Markings. The Micrometer Shall Be Supplied With A Setting Standard And Calibration Certificate. , Feeler Gauges Made Of Hardened And Tempered Spring Steel, Precision-Ground To Required Thickness, And Permanently Marked With Size Values. The Set Shall Include Multiple 75 Mm Long Blades Of 30 Different Thicknesses 0.03 Mm To 1.00 Mm Assembled In A Steel Holder With Pivot. Each Blade Shall Be Rust-Resistant And Polished For Smooth Operation. The Gauge Shall Conform To Is 3179:1982 Or Equivalent Standards. , Wire Gauge (Standard Bs 1505 Type) Manufactured From Hardened And Tempered Steel With Precisely Cut Slots For Wire Sizes 1 To 36 Swg. The Gauge Shall Be Circular Or Rectangular In Shape With Permanent Engraved Markings. The Tool Shall Comply With Bs 3737 / Is 3177 Standards For Accuracy. Surface Shall Be Satin Chrome Or Nickel Plated To Resist Corrosion Suitable For Measuring Diameters Of Wires, Rods, And Drill Bits. , Inside Calipers Shall Be Made Of Forged Steel Or Stainless Steel, Polished And Hardened. The Legs Shall Have Finely Ground Points With A Pivot Joint And Tension Adjustment For Smooth Movement. Measuring Range: 20–170 Mm Suitable For Measuring Internal Dimensions And Bore Diameters. Shall Conform To Is 3564:1985 Standards. , Outside Calipers Made Of High-Grade Carbon Or Stainless Steel With Hardened Tips, Spring Joint, And Knurled Adjustment Nut For Precision. Shall Conform To Is 3564:1985 Or Equivalent Standards. Surface Finish: Polished Or Chrome-Plated. 12 Inch Size , Centre Punch Manufactured As Per Is 7177 - 1999 Or Equivalent, Made Of High Carbon Or Alloy Tool Steel, Hardened And Tempered At The Striking End And Point. Length: Approximately 150 Mm, Approximate Weight 160 Gm With Point Angle Of 60° ± 2°. The Striking End Shall Be Chamfered To Prevent Mushrooming. Surface Finish Shall Be Black Oxide Or Polished. Suitable For Marking Centers On Metal Surfaces Before Drilling Operations. , Portable Digital Non-Contact Tachometer Of Reputed Make, With A Non-Contact Measuring Range Of Approximately 10 To 99,999 Rpm And Accuracy Not Inferior To ±0.04% ±2 Digits. Equipped With A Digital Lcd Display, Data Hold, Counting Function, And Computer/Usb Interface For Data Transfer, A Working Distance Of Around 0.2 M With A ±30° Working Angle, Reflective Tape, Interface Cable, And Carrying Case. Conforming To Iec 61010-1 / Is 13875. , Portable True-Rms Digital Multimeter Of High- Accuracy, Capable Of Measuring Ac/Dc Voltage Up To 1000 V, Ac/Dc Current Up To 10 A, Resistance, Capacitance, Frequency, Diode, And Continuity. The Meter Should Have Features Like Auto-Ranging, Data- Hold, Min/Max, And Relative Measurement Functions With A Large Back-Lit Display Of Minimum 4000 Counts Or Higher. The Instrument Shall Have Overload Protection, Fused Input Terminals, And Comply With Safety Category Cat Iii 1000 V Or Cat Iv 600 V As Per Iec 61010-1. The Unit Shall Be Housed In A Protective Insulated Casing Suitable For Field Use And Supplied Complete With Test Leads, Batteries, Protective Case, And Calibration Certificate. , Handheld Clamp Meter (True-Rms Type) Designed For Measurement Of Ac And Dc Currents Up To 1000 A, With Additional Functions For Ac/Dc Voltage, Resistance, Frequency, And Continuity. The Jaw Opening Shall Accommodate Conductors Up To 40–60 Mm In Diameter. The Meter Shall Feature A Large Digital Display, Auto-Range Selection, Data-Hold And Peak Capture Functions, And Have An Accuracy Of ±2 % Or Better. It Shall Meet Cat Iii 1000 V / Cat Iv 600 V Safety Standards, Include Overload And Transient Protection, And Be Built In A Shock-Resistant Insulated Body. The Clamp Meter Shall Be Supplied With Test Leads, Carrying Pouch, And Calibration Certificate. , Handheld Vibration Meter Shall Be Capable Of Measuring Vibration Velocity, Displacement, And Acceleration Within A Frequency Range Of 10 Hz To 1 Khz Or Higher Complying Iso 2954. The Instrument Shall Display Rms Or Peak Values In Standard Engineering Units (Mm/S, Μm, M/S²). It Shall Feature A Detachable Accelerometer Probe, Communicate With Pc Computer For Statistics And Printing By The Optional Cable And The Software. The Device Shall Be Compact, Battery-Operated, And Suitable For Predictive Maintenance Of Rotating Machinery. It Shall Be Supplied With Transducer, Magnetic Base, Extension Cable, And Carrying Case. , Wire Strippers Suitable For Removing Insulation From Copper Conductors Ranging From 0.5 Mm² To 6 Mm² , Ratchet-Type Crimping Tool Designed For Insulated And Non-Insulated Terminals 1.5 Mm² To 10 Mm², With Interchangeable Dies And Ergonomic Handles.Alloy Steel Duly Hardened & Tempered , Heavy-Duty Mechanical Or Ratchet Type Cable Cutters Suitable For Cutting Copper And Aluminium Cables Up To 300 Mm² , Soldering Iron Shall Be Of 40 W Capacity Insulated Handle. Cable Lugs And Ferrules Shall Be Of Tinned Copper, Crimp Type, Conforming To Din 46234/46235 Standards , Clamp-On Earth Leakage Meter Shall Measure Ac Leakage Current In Grounding And Neutral Conductors Without Disconnection, Within A Range Of 0.1 Ma To 100 A Or Higher. The Clamp Jaw Shall Accommodate Conductors Up To 50 Mm Diameter. The Instrument Shall Comply With Cat Iii 600 V Safety Category, Have A Back-Lit Display, And Be Supplied With Batteries, Manual, And Calibration Certificate. , Infrared Thermometer (Ir Gun) Shall Measure From - 50 °C To +550 °C With Laser Targeting And Digital Display. Should Have Rugged, Insulated Housings And Be Supplied With Charger, Carry Case, And Calibration Certificate. , Battery Load Tester (12V) Shall Provide Controlled Load Up To 2–200 Ah To Assess Battery Condition By Measuring Voltage Drop And Internal Resistance Instruments Shall Have Clear Displays, Polarity Protection, Insulated Clamps, And Rugged Enclosures For Workshop Use. , Digital Motor Checker Equipped With A Backlit Lcd Display, To Provide Accurate Measurements Of Key Electrical Parameters Including Insulation Resistance (0–200 M?) And Inductance (0–200 Mh), Operates On Alkaline Batteries, Featuring Low Battery Indication For Reliable Field Use, Precise Readings With An Accuracy Of ±2%. Complies With Iec 61010-1: Safety Requirements For Electrical Equipment For Measurement. , Smart Battery Charger Shall Provide Automatic Multi- Stage Charging For 12 V Batteries With Protections For Overcharge And Polarity Reversal. , Mechanical Puller (3?, 2/3-Jaw, Double Ended) Of Reputed Make Made Of Hardened And Tempered Alloy Or Carbon Steel And Finished With Corrosion-Resistant Coating, With Interchangeable 2-Jaw And 3-Jaw Configuration, Allowing Both Internal And External Gripping Applications, Nominal Jaw Size Shall Be 3 Inch (76.2 Mm), With A Spread Of Approximately 76 Mm, Reach Of About 65 Mm, And Working Diameter Range From 15 Mm To 80 Mm, Threaded Spindle Length 125 Mm, Conforming To Is 6149 / Iso 2985 Standards. , Mechanical Puller (8?, 2/3-Jaw, Double Ended) Of Reputed Make Made Of Hardened And Tempered Alloy Or Carbon Steel And Finished With Corrosion-Resistant Coating, With Interchangeable 2-Jaw And 3-Jaw Configuration, Allowing Both Internal And External Gripping Applications, Nominal Jaw Size Shall Be 8 Inch (203.2 Mm), With A Spread Of Approximately 203 Mm, Reach Of About 177 Mm, And Working Diameter Range From 30 Mm To 210 Mm, Threaded Spindle Length 174 Mm, Conforming To Is 6149 / Iso 2985 Standards. , T-Handle Spark Plug Socket Wrench (21 Mm) Carbon Steel With A Chrome-Plated Finish, With A 360- Degree Swivel Head For Flexible Operation, A Plastic Grip On The T-Handle, A Rubber Insert Within The Socket, An Approximate Weight Of 110 Grams, And Conforming To Relevant Standards For Hand Tools. , 10Pcs Carburetor Adjusting Tool Kit Including: 21- Teeth Splined, 7-Teeth Splined, Single D, Small Head Single D, Double D, Pac Man, Small Head Pac Ma,N Hexagon Shaped, Six Star, And Carburetor Cleaning Tools All Made Of High-Quality Stainless Steel Wear Resistant And Long Lasting With Ergonomic Handle Comfortable To Grip And Stable To Use. , The Heavy-Duty Spark Plug Cleaner And Tester Designed To Clean And Test Spark Plugs Under Simulated Engine Conditions, Operates On A 220 V Ac Supply And Incorporates A 12 V / 12 Kv Ignition Coil For Spark Generation And A 220 V / 12 V Electronic Vibrator For Cleaning Including A Pressurized Testing Chamber With A Working Pressure Of Up To 12 Kgf/Cm² And A Separate Abrasive Cleaning Chamber Equipped With A Double- Acting Valve For Blasting And Dust Removal, Should Be Compatible With Spark Plug Sizes M10, M12, M14, And M18 Through Interchangeable Rubber Adapters And Features A Pressure Regulator For Maintaining Safe And Consistent Operation. Product Should Conform To General Standards For Electrical Safety And Workshop Equipment, Such As Is 302 (Part 1): Safety Of Electrical Equipment, Is 10326: Automotive Service Equipment – Spark Plug Testers, Or Equivalent International Standards , Heavy-Duty Sprocket Chain Breaker And Splitter Tool Suitable For Breaking, Splitting, And Repairing Chains Of Size 420 To 530 Made Of High-Grade Carbon Steel , Compact Chain Saw Grinder For Precise Grinding Of Chain Saw Blades For A Rated Voltage Of 220–230 V At 50/60 Hz, With An Input Power Of 300 W And A No-Load Speed Of 8400 Rpm, Equipped With A 100 Mm Grinding Wheel Suitable For Most Standard Chain Saw Chains, Weighing Around 2.5 Kg, Conforming To General Safety And Performance Standards Such As Is 302 (Part 2/Sec 201): Electrical Safety For Hand-Held Tools And Iec 60745-2-4 , Soldering Station Operating On A 220–240 V Ac, 50/60 Hz Supply, Input Power Of 60 W, With A Preheat Time Of Approximately 1 Minute, Digital Temperature Display, Adjustable And Thermostatic Temperature Control Via A Rotary Knob, Built-In Ceramic Heating Element, A Straight Tip Head, A Durable Stand For Iron Placement, Packed In A Color Box, Conforms To Iec 60335-2-45: Household And Similar Electrical Appliances – Safety Of Portable Heating Tools And Iec 61340-5-1: Protection Of Electronic Devices . , Compact, Durable, And Easy To Operate Portable High- Pressure Hand-Operated Portable Grease Pump With A 10 Kg Grease Capacity And Delivers A Material Output Of Approximately 3 Grams Per Stroke, Maximum Block Pressure Of 140 Kg/Cm², A 2-Meter High-Pressure Rubber Hose Fitted With End Connections. , Corded Type Electric Impact Wrench Conforming To Is 7151:1983 / Iec 60745-2-2 [Vibration (=11.5 M/S²), And Noise (104 Db(A))], With A Continuous Input Rating Of 400 W,. It Shall Provide A Maximum Fastening Torque Of 350 N·M, With A No-Load Speed Of 2000 Rpm And Impact Rate Of 2000 Blows Per Minute, 12.7 Mm (½”) Square Drive, A 2.5 M Power Supply Cord. The Housing In Impact-Resistant Polymer With Reinforced Internal Metal Gear Casing, Suitable For Tightening And Loosening Ensuring Efficient Operation For Both Standard (M12–M22) And High-Strength Bolts (M12–M16) In Vehicle And Machinery Maintenance Applications , Electric Power Drill (Corded Type) Of Reputed Make, Single Phase 220–240 V, 50 Hz Ac Supply, 350 W And Variable Speed Range Up To 3000 Rpm (No Load). Including A Pistol-Grip Body, Keyed Or Keyless Chuck, And A 2.0 M Power Supply Cord Complying With Is 7554 / Iec 60745 / Iso 11148 Or Equivalent Standards, [Low Vibration (=3.0 M/S²) And Sound Pressure Level Below 80 Db(A)] Supplied Complete With Chuck Key, Side Handle (If Applicable), And Instruction Manual. , Portable Electric Heat Gun Powered By An 1800 W Motor Operating At 230 V Ac, For Adjustable Airflow Between 350–550 L/Min And A Working Temperature Range Of 60°C To 550°C, Selectable In Three Stages (60/350/550°C), Achieves Full Heat-Up Within 1 Minute, With A Heat-Resistant Plastic Body And Heat Isolation Cap, Weighs 750 G And Features A 2 M Cord Length And Conforming To Iec 60335-2-45: Household And Similar Electrical Appliances – Safety Of Portable Heating Tools And Iec 61000-3-11/12: Electromagnetic Compatibility Standards. , Bench Vice Of Heavy-Duty Engineer’S Type, Suitable For Fitting And General Workshop Applications With Jaw Width 125 Mm (5 Inches), With Replaceable Serrated Hardened Steel Jaws For A Firm Grip On Workpieces, The Body And Sliding Jaw Shall Be Made From High-Grade Cast Iron Or Forged Steel, Precision Machined To Ensure Smooth Operation And Alignment. The Vice Shall Be Equipped With A Large-Diameter Acme-Threaded Spindle And Steel Handle With Knurled Ends For Easy Tightening (1600 Kg Tightening Force) And Release. The Vice Includes A 360° Swivel Base With Locking Mechanism, Allowing Positioning And Adjustment As Required During Work. The Anvil Surface On The Rear Shall Be Machined And Hardened, Suitable For Light Hammering Operations. The Vice Shall Have A Clamping Capacity Of At Least 150 Mm, And All Moving Parts Shall Be Protected Against Rust And Corrosion By Paint Or Plating. The Bench Vice Should Be Suitable For Mounting On Heavy-Duty Wooden Or Steel Workbenches And Capable Of Withstanding Heavy Mechanical Use In Workshops And Maintenance Facilities. It Shall Conform To Is: 2586 (Specification For Bench Vices, Heavy Duty) Or Equivalent Standard. , Heavy-Duty Roller Tool Cabinet With 4 Drawers And One Cupboard Suitable For Use In Mechanical, Workshops For Organized Storage Of Hand Tools, Instruments, And Accessories Made Of High-Quality Cold- Rolled Steel Sheet With A Cabinet Body Thickness Of 0.8–1.0 Mm And Drawer Sheet Thickness Of 0.7 Mm, With An Overall Size Of 765 Mm (L) × 465 Mm (W) × 812 Mm (H) And An Overall Height Of 976 Mm Including Casters. Drawers Of Size 536 Mm (L) × 410 Mm (W) × 74.5 Mm (H), Mounted On Precision Ball-Bearing Slides And The Top Panel Area Should Be Suitable For Tool Placement During Maintenance Work. The Unit Should Be Mounted On Four Heavy-Duty Casters Of Size 5? × 2?, Two Of Which Shall Be Swivel Casters With Locking Brakes For Easy Mobility And Stability During Use. The Cabinet Shall Include A Central Locking System For All Drawers, Should Be Surface-Treated With Powder Coating For Corrosion Resistance And A Smooth Finish. The Tool Cabinet Shall Conform, Where Applicable, To The General Guidelines Of Is 7155 (Industrial Trolleys And Cabinets) And Iso 9001:2015 Quality Manufacturing Standards. , Oil Drain Pan Made Of High-Density Polyethylene (Hdpe) With A Capacity Of 16 Litres Including Integrated Handles, A Pouring Spout, And Anti-Spill Lips To Prevent Leakage During Draining Suitable For Chemical Resistance To Engine Oil, Transmission Fluids, And Coolants. , Rack For Batteries, Made Of Well-Seasoned Hardwood Or Marine Plywood With Sturdy Ms Frame Or Wooden Supports. Includes 3–4 Ventilated Shelves With Acid- Resistant Coating And Removable Rubber Or Pvc Mat. Designed To Hold Multiple Batteries Safely And Prevent Corrosion. Approx. Size: 1500 Mm × 1000 Mm × 450 Mm. , Rack For Spares Fabricated From High-Quality Wood Or Plywood With Ms Reinforcement. Includes Adjustable Or Fixed Shelves (3–5 Tiers), Each Supporting Up To 150 Kg (Udl). Finished With Protective Paint Or Polish For Workshop Use. Approx. Size: 2000 Mm × 900 Mm × 450 Mm. , Industrial Wet And Dry Type Vacuum Cleaner With A Power Rating Of 1500 W And Operating Voltage Of 220–240 V, 50 Hz, Suitable For Workshop And Service Bay Cleaning Applications With A Capacity Of 35 Litres, A Vacuum Suction Pressure Of 200 Mbar And An Airflow Rate Of 53 L/S, Ensuring High-Efficiency Dust And Liquid Removal. The Tank Should Be Made Of Corrosion- Resistant Stainless Steel (Minimum Ss 304 Grade) With Heavy-Duty Caster Wheels For Mobility. It Should Be Provided With A Flexible 5 M Power Cable, Washable Filters, Blower Function, And Accessories For Both Wet And Dry Operation. The Vacuum Cleaner Shall Conform To Iec 60335-2-69 (Safety For Wet And Dry Vacuum Cleaners For Commercial Use) Or Equivalent Indian Standard Is 11621:1986, And Include Overload And Thermal Protection Features For Motor Safety. , Portable, Electric-Operated Industrial Pressure Washer Conforming To Iec 60335-2-79 / Is 8442 With A Power Rating Of 1700 W (230 V, 50 Hz Single-Phase Supply) And A Maximum Working Pressure Of 130 Bar And A Flow Rate Of 7 Litres Per Minute, With Self-Priming Capability Of 0.5 M, High-Pressure Foam Detergent System, 6 M Pvc Hose, Manual Hose Reel, 5 M Power Cable, 3-In-1 Nozzle And Ergonomic Handle , Industrial Locker Cabinet (24-Door Type), Fabricated From 22-Gauge Mild Steel Sheet Pre-Treated And Powder-Coated For Corrosion Resistance And Smooth Finish With A Rigid Frame Structure, Each Locker Compartment With Individual Mechanical Key Locks Shall Measure Approximately 18" (D) × 12" (W) × 12" (H), With A Total Cabinet Size Of About 18" (D) × 48" (W) × 78" (H). A Load Capacity Of Minimum 10 Kg Including Ventilation Slots And Numbering Provision For Each Compartment , Abc Powder Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 4 Kg Suitable For Class A Fires. Dry Chemical Powder (Mono Ammonium Phosphate) Based, Stored Pressure Type With Working Pressure Of 15 Bar, Suitable For Electrical And Combustible Material Fires.Extinguisher Should Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label. , Co2 Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 4.5 Kg Suitable For Class B Fires . Carbon Dioxide Gas Type With Seamless High-Pressure Steel Cylinder Conforming To Is 7285, Discharge Hose With Horn, And Designed For Electrical And Flammable Liquid Fires. Extinguisher Sould Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory- Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label. , Foam Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 9 L, Suitable For Class C Fires. Stored Pressure Or Cartridge Type Using Aqueous Film-Forming Foam Suitable For Flammable Liquid Fires. Extinguisher Should Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label. , Fire Blanket Shall Be Made Of 840 Gsm Glass Fiber Or Kevlar-Coated Woven Fabric, Resistant To Temperatures Up To 550°C, Conforming To Is 11871 / Bs En 1869, And Provided In A Quick-Release Wall-Mount Case. Standard Blanket Size: 2.00 M × 1.00 M For Personnel Protection And Small Fire Suppression. , First Aid Box Of Size 32.5(H) X 28.5(W) X 8(D) Cmshall Conform To Is 13154 (Part 1–3), Made Of Powder-Coated Metal, Gi Or Abs Plastic, Waterproof And Corrosion Resistant, To Keep All Essential Medical Supplies For Industrial Workshops (Bandages, Antiseptics, Gauze, Adhesive Strips, Scissors, Burn Cream, Splints, Sterile Pads, And Cpr Mask). , Eye Wash Station Wall Mount Type, Made Of Stainless Steel Push Plate 12.7 Mm (1/2 Inch Bsp) Inlet, 4810 Ss, Providing Continuous Flow At 1.5 L/Min Per Outlet, Operated By A Push Plate, Complying With Ansi Z358.1 / Is 10592. , Foldable Stretcher Shall Be Lightweight Aluminum Or High-Tensile Steel Frame With Washable Canvas Sheet, Capable Of Carrying 120 Kg Load, Fitted With Safety Straps And Rubber Handles, Conforming To Is 1904 / En 1865. , Ppe: Helmets Hdpe Or Abs Shell, Is 2925 Compliant, Chin Strap, Sweatband, Impact-Resistant Up To 50 Joules. , Ppe: Goggles Polycarbonate Lenses, Anti-Scratch And Uv-Resistant, Is 5983 / En 166 Compliant, Side Shields. , Ppe Industrial Gloves: For Mechanical Work—Leather Or Nitrile (Is 6994); For Chemical Work—Pvc/Neoprene (En 374); For Electrical Insulation—Rubber Class 0 (Is 4770). , Ppe: Safety Boots Confirming To Is 15298 / En 20345 Compliant, Steel/Composite Toe Cap (200 J Impact), Oil- And Slip-Resistant Sole, Steel Mid Sole Antistatic. , Ppe: Protective Overalls With 100% Cotton 210 Gsm Or Fire-Retardant Fabric, Full-Sleeve, High-Visibility Reflective Tapes Per Is 15748 / En 20471. , Electrical Insulated Gloves Conforming To Is 4770 / Iec 60903, Suitable For Class 0 (1000 V Ac / 1500 V Dc) Electrical Protection, Made Of High-Dielectric Natural Rubber, Seamless, And Rolled Cuff Type. Each Glove Shall Undergo Routine Dielectric Test At 5 Kv For 1 Minute With No Puncture Or Flashover. The Gloves Shall Be Category Rc (Resistant To Acid, Oil, Ozone, And Low Temperature) And Provided With A Cotton Inner Liner And Storage Pouch. Supplied With Test Certificate Indicating Batch Number, Test Voltage, And Date. , Welding Face Shield Suitable For Full-Face Protection During Welding, Grinding, And Metal Fabrication Works With A Shield Size Of Approximately 9" X 12", Made Of Durable Polypropylene Providing High Impact, Heat, And Corrosion Resistance. The Face Shield Shall Include An Adjustable Ratchet-Type Headgear With Multiple Adjustment Positions To Ensure A Secure And Comfortable Fit For Prolonged Use. The Approximate Weight Shall Be 1.5 Kg Or Less, And The Product Shall Be Supplied As One Complete Unit. The Face Shield Should Conform To General Industrial Safety Standards Suitable For Use In Workshops. , Industrial-Grade Welding Gloves Suitable For Providing Protection, Comfort, And Dexterity During Welding, Cutting, And Metal Fabrication Operations, Made From Premium Split Leather (Cowhide Or Goatskin) With A Minimum Thickness Of 1.2 Mm, Offering High Resistance To Heat, Sparks, And Mechanical Abrasion. The Inner Lining Shall Be Made Of Soft Flame-Retardant Cotton Or Fleece, Providing Insulation Against Heat And Comfort For Prolonged Use. Each Glove Shall Have Reinforced Palm And Finger Patches For Added Durability And Better Grip While Handling Tools And Hot Metal Objects. The Gloves Should Be Stitched With Heat- Resistant Thread To Prevent Seam Failure During Exposure To High Temperatures. The Length Shall Not Be Less Than 14 Inches (350 Mm), Ensuring Full Hand And Wrist Protection, With Extended Cuffs To Safeguard The Lower Forearm Against Welding Spatter And Radiant Heat. The Gloves Should Be Conformed To En 388 (Mechanical Risks) And En 407 (Thermal Hazards) Or Equivalent Indian Standards (Is 6153). They Shall Be Suitable For Mig, Tig, Arc, And Gas Welding Operations. Should Be Heat And Flame-Resistant, Puncture And Tear-Resistant, And Designed For Repeated Use In Demanding Industrial , Heavy-Duty, Low-Profile Type Hydraulic Trolley Jack Suitable For Lifting Vehicles Or Machinery Up To A Rated Capacity Of 3 Tons. The Jack Shall Be Constructed From High-Grade Steel With Welded Frame For Superior Strength And Stability, A Lifting Range From Approximately 130 Mm To 465 Mm, Operated Through A Hydraulic Lifting Mechanism Actuated By A Detachable Pump Handle. Should Be Equipped With A Safety Overload Valve To Prevent Lifting Beyond Rated Capacity, And Precision Hydraulic Seals To Prevent Oil Leakage. The Unit Shall Feature A 360° Swivel Rear Caster And Wide Front Wheels For Easy Maneuverability. The Saddle Shall Be Grooved Or Rubber-Coated For Secure Load Contact. The Jack Shall Conform To Is 7620 / Asme- Pase Or Equivalent Standards, And Shall Be Finished With Corrosion-Resistant Powder Coating. Supplied Complete With Hydraulic Oil Filled And Ready For Use. , Industrial-Grade, Floor-Operated Type Hydraulic Trolley Jack Suitable For Lifting Heavy Vehicles, Machinery, Or Agricultural Equipment Up To A Maximum Capacity Of 5 Tons. The Construction Shall Be Of Robust, All-Steel Design With Reinforced Chassis And Welded Seams For Durability. It Shall Have A Lifting Range From Approximately 150 Mm To 500 Mm, Operated By A Long Detachable Handle Providing Sufficient Leverage For Smooth Lifting. The Hydraulic System Shall Incorporate A Safety Overload Bypass System, Precision Machined Piston And Pump For Consistent Performance, And A Reliable Lowering Control Valve For Controlled Descent. The Jack Shall Be Equipped With Steel Swivel Casters, Wide Stance For Stability, And A Saddle Plate With Anti- Slip Surface. The Surface Finish Shall Be Rust-Resistant Enamel Or Powder Coating. The Unit Shall Comply With Relevant Is/Ansi/Ce Safety Standards, Factory-Tested For Rated Load, And Supplied Ready For Workshop Service. , The Hydraulic Bottle Jack Of 10-Ton Rated Capacity, Suitable For Lifting Tractors, Vehicles, Or Heavy Structures. The Jack Body Shall Be Made Of High-Tensile Steel With Precision Machining For Durability And Stability. It Shall Have A Lifting Range From Approximately 200 Mm To 400 Mm, Incorporating A Screw Extension On The Ram For Height Adjustment. The Hydraulic System Shall Be Fitted With A Built-In Safety Overload Valve And High-Quality Seals To Prevent Leakage. The Operating Handle Shall Be Detachable And Designed For Easy Pumping Action. The Base Shall Be Wide And Stable To Ensure Safety During Lifting Operations. The Jack Shall Conform To Is 10672 / Asme B30.1 Or Equivalent Standards, And Finished With Corrosion-Resistant Paint. Supplied Fully Assembled, Tested, And Filled With Hydraulic Oil. , The Jack Stands Shall Be Of Heavy-Duty Ratchet Or Pin- Lock Type, Designed To Support Loads Up To 3 Tons Per Pair. Each Stand Shall Be Fabricated From High-Grade Steel With A Broad, Stable Base And A Ratcheting Support Column Providing Positive Load Engagement. The Height Adjustment Range Shall Be Approximately 290 Mm To 430 Mm, With Fine-Tooth Ratchet Mechanism Or Pin-Lock System Ensuring Secure Positioning. Each Stand Shall Include A Safety Locking Mechanism To Prevent Accidental Lowering Under Load. The Saddle Shall Have A Contoured Top For Stable Seating Under Vehicle Lifting Points. All Structural Components Shall Be Fully Welded And Finished With Corrosion-Resistant Powder Coating. The Stands Shall Meet Asme-Pase / Ansi Pald Or Equivalent Safety Standards. Supplied As A Matched Pair, Factory-Tested For Load Stability And Mechanical Integrity. , The Hydraulic Engine Hoist Shall Be A Foldable, Mobile Workshop Crane With A 2 Ton Rated Lifting Capacity, Suitable For Lifting, Removing, And Installing Vehicle Engines Or Heavy Assemblies. The Frame Shall Be Made Of High-Strength Steel Sections With A Reinforced Boom, Hydraulic Lifting Ram, And Heavy-Duty Castor Wheels For Mobility. The Boom Shall Have Adjustable Reach Positions (E.G., 500 Kg, 1000 Kg, 1500 Kg, 2000 Kg) With A Lifting Range Of Approximately 0 – 2300 Mm. The Hydraulic Ram Shall Be Operated Via A Detachable Handle And Equipped With A Safety Overload Valve To Prevent Overloading. The Hoist Shall Feature A Folding Design For Space-Saving Storage, And A 360° Swivel Hook With Safety Latch For Secure Load Handling. The Finish Shall Be Industrial Enamel Or Powder-Coated For Corrosion Protection. The Equipment Shall Comply With Is 7631 / Asme B30.20 / Ce Standards And Supplied Ready For Operation. , The Transmission Jack Shall Be A Hydraulic Telescopic Type Suitable For Removing And Installing Vehicle Transmissions Or Gearboxes From Underneath The Lift. The Rated Load Capacity Shall Be 0.5 Ton, With A Lifting Range Of Approximately 1100 Mm To 1900 Mm. The Lifting Mechanism Shall Be Actuated By A Foot-Operated Hydraulic Pump For Hands-Free Operation. The Tilting Head Plate Shall Provide Front, Rear, And Side Adjustment Through Fine-Thread Screws To Aid Alignment During Installation. The Base Shall Be Wide And Equipped With Four Swivel Castor Wheels For Stability And Maneuverability. The Unit Shall Have A Safety Overload Valve, Heavy-Duty Hydraulic Seals, And A Controlled Lowering Valve. It Shall Conform To Asme Pase / En 1494 Standards And Be Supplied Fully Assembled And Oil-Filled. , The Chain Block Shall Be A Manual, Hand-Operated Lifting Device Of 2 Ton Rated Capacity, Suitable For Workshop And Field Lifting Applications. It Shall Have A Mechanical Gear System Enclosed In A Steel Casing, Operating A Load Chain Made Of Grade 80 Alloy Steel With High Tensile Strength. The Standard Lift Height Shall Be 3 M – 6 M, With An Option For Extended Lift Lengths. The Mechanism Shall Incorporate A Load Brake With Dual Pawls For Positive Load Holding And Safety Hooks With Safety Latches At Both Ends. The Hand Chain Shall Run Smoothly On Precision-Machined Sprockets. The Unit Shall Conform To Is 3832 / Asme B30.16 / En 13157, With Load Testing Certificates And Corrosion- Resistant Paint Finish.

Contact Information