Tenders Are Invited For Reconstruction Of The Sports Field At The School And Kindergarten Complex. Ken In Ba ... in Poland

Work Detail

The Subject Of The Order Is The Reconstruction Of A Multi-Purpose Pitch With Dimensions Of 32 M X 44 M, With A Polyurethane Surface On A Stone Aggregate Base, Together With The Replacement Of The Pitch Fence With A Gate And A Wicket, As Well As The Replacement Of Pitch Lighting Elements. The Pitch Is A Public Sports Facility Intended For School Children And The Local Community Of Bardo. Locationthe Area Of ​​Plot No. 116, Located Within The Town Of Bardo At Ul. Polnej Scope Of Work Covered By The Order: 1. Demolition And Disposal Of Polyurethane Surface2. Delivery And Installation Of A Jointless, Non-Prefabricated Polyurethane Surface, Intended For Construction On The Construction Site. Layer Thickness 13 Mm (11 + 2 Mm). 3. Construction Of A New Foundation From Natural Aggregate4. Disassembly Of The Old And Construction Of A New Fence For The Multi-Purpose Sports Field Made Of Galvanized Steel Mesh 40*40 Mm, 2.8 Mm Woven On Steel Pipe Posts With A Spacing Of 2.6 M And A Height Of 4 M5. Disassembly And Assembly Of The Multi-Purpose Sports Field Fence Gate6. Disassembly And Assembly Of 2 Fence Gates For A Multi-Purpose Sports Field, Dimensions: 120X2007. Painting The Lines Of The Pitches In Accordance With The Description Below) Handball Pitchthe Handball Pitch Is A Rectangle 40.00 M Long And 20.00 M Wide. There Is A 5.0 M Wide Protective Strip Around The Pitch Along The Side Lines And 2.00 M Wide Along The Goal Lines. The Pitch Is Marked With 5 Cm Wide Lines In A Color Contrasting To Its Surface. In Addition To The Sidelines And Goal Lines, There Are The Following Elements On The Pitch: Center Line - Perpendicular To The Side Lines, Dividing The Pitch Into Halves. Player Substitution Lines - Perpendicular To The Side Lines, 3.00 M From The Center Line, 50 Cm Long Towards The Inside Of The Pitch. Player Substitution Area - Designated In Such A Way That Arcs With A Radius Of 6 M Are Drawn Outside Both Goal Posts (Counting From The Rear Edge). Wheel Circumference. The Two Arcs Are Then Connected By A 3M Long Line, Parallel To The Goal Lines. Goals With Internal Dimensions Of 3.0 M X 2.0 M Made Of Powder-Coated Steel Profile Should Be Embedded In Galvanized Sleeves. The Goals Should Be Equipped With Polyethylene Nets - Pe2.5 X 3.0 X 2.0 M, Depth. 08/1.0M. Free Throw Lines - A Dashed Line Is Marked (Length Of The Lines And The Distance Between The Lines - 15 Cm) Parallel To The Goal Area Line And 3.0 M Away From It. Penalty Throw Lines With A Length Of 1 M Should Be Marked At A Distance Of 7.0 M From The Center Of The Goal And Parallel To The Goal Line. B) Basketball Court. The Basketball Court Has The Shape Of A Rectangle With Dimensions Consistent With The Design (28 X 15 M), The Court Is Bordered By Clearly Painted Lines 5 Cm Wide. A Central Circle With A Radius Of 1.80 Cm Is Drawn In The Middle Of The Playing Field, Measured From The Inner Edges Of The Line Marking This Circle. The Center Line Is Drawn Parallel To The End Lines, Between The Midpoin

Contact Information