Bids Are Invited For Price Registration For The Acquisition Of Switches And Transceivers For The Information ... in Brazil

Work Detail

1. Swith Ethernet - Concentration 1.1 General Features 1.1.1 Ethernet Switch Compatible With The Following Features: Ip Routing (Layer 3) Fast Ethernet (802.3U) Giga Ethernet (802.3Ab, 802.3Z) 10 Giga Ethernet (802.3Ae) Mpls 1.1.2 Have At Minimum 24 1Ge Ports 1000Base-X Sfp And 4-Port 10Ge Sfp+. 1.1.3 The Equipment Must Be 1U High, Mountable On A 19’’ Rack And Must Be Accompanied By The Appropriate Accessories For This Purpose. 1.1.4 Support Normal Operation At Temperatures From 0 To 50°C. 1.1.5 Relative Humidity 10% Up To 90% Without Condensation. 1.1.6 The Equipment Must Have Forced Ventilation Suitable For The Operation Of The Equipment. 1.1.7 The Equipment Is Of First Quality, New, Unused, Recently Manufactured (Manufactured No More Than 6 Months Before The Delivery Date) And With Appropriate Finishing. 1.2 Power Supply 1.2.1 Have A Redundant 110/220 V / Dc (-48V) Ac Power Supply, With Automatic Switching. 1.2.2 The Installed Power Supply Is Internal To The Chassis. 1.2.3 The Installed Power Supply Is Of The “Hot-Insertable” And “Hot-Removable” Type. 1.2.4 The Installed Power Supply Powers And Supports The Requested Configuration. 1.3 Performance 1.3.1 The Equipment Has Specific Hardware With Asics Technology (Application-Specific Integrated Circuits) To Handle Packets, Filters, Policies And Etc. 1.3.2 It Has Non-Blocking, Internal Wire-Speed ​​Architecture. 1.3.3 Implement Aggregate Switching Capacity Greater Than Or Equal To 128 Gbps, Input And Output Simultaneously. 1.3.4 Packet Forwarding Capacity Of At Least 95Mpps, With Packets Of A Maximum Of 64 Bytes. 1.4 L2 Features 1.4.1 Implement At Least 4,094 Active Vlans (Do Not Consider Multiplier Mechanisms Such As Q-In-Q). 1.4.2 Implement At Least 32,000 Mac Addresses. 1.4.3 Implement 802.1Q Virtual Bridged Lans. 1.4.4 Implement 802.1Q-In-Q (Vlan Stacking). 1.4.5 Implement 802.1Ad (Provider Bridges). 1.4.6 Implement Jumbo Frames (9000 Bytes). 1.4.7 Implement 802.1P Taggi, Switch 24 Ports 10/100/1000, With The Following Features: It Must Be Provided With A Minimum 24 (Twenty-Four) Gigabit Ethernet Type Ports For Connection To 10/100/1000Base-Tx And Poe Power (Power Over Ethernet) In The 802.3ª Standard The Equipment Must Allow Creation Of Stacking, Given That: Each Equipment Must Allow The Creation Of A Stack Of At Least 192 (One Hundred And Ninety-Two) 10/100/1000Mbps Gigabit Ethernet Ports Managed By Just One Ip Address; Each Equipment Must Allow Integration With 48-Port Switch Equipment From The Same Manufacturer; O The Stacking Configuration Can Be Done Via Hardware And/Or Software; 1000Base-Lx, 1000Base-Sx And 100Basefx; Must Be Provided With Installed Capacity To Handle A Rate Of At Least 66 (Sixty-Six) ​​Mpps; 128 (One Hundred And Twenty Eight) Gbps; Combo Ports Accepted; 16,000 (Sixteen M; 15.4W On All 24 10/100/1000Base-Tx Ports Simultaneously; Must Support Energy Saving Functionality, That Is, Enable To Place An Ip Phone Connected To The Switch Port In Stand-By Mode; 802.3Ad; ; ; 802.1P; 802.3X; 802.1P And Ieee 802.1Q For Virtual Networks, For At Least 1000 (One Thousand) Vlans; -–-; Must Support The Internet Group Management Protocol (Igmp);

Contact Information