|
Lot 1 - Full Site Civil Engineer With Additional Charges, Lot 1 - Rental Of Container 2, 30 Af_03/2022_Ps, Lot 1 - Siding With Metallic Tile. Af_03/2024, Lot 1 - Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03/2024, 01/22/2026 - 10:08:47, Lot 1 - Continuous Helix Pile, Diameter 30 Cm, Including Concrete Fck=30Mpa And Minimum Reinforcement (Exclusive Pumping, Mobilization And Demobilization). Af_12/2019_Pa, Lot 1 - Rental Of Submersible Pump For Drainage And Sewage, Three-Phase Electric Motor, Power Of 4 Hp, Discharge Diameter Of 3. Operation Range Q=60 M3/H - (+ Or - 1 M3/H) And Amt=2 M, Q=11 M3/H (+ Or - 1 M3/H) And Amt = 23 M (+ Or - 1 M), Lot 1 - Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_01/2024, Lot 1 - Manufacture, Assembly And Disassembly Of Formwork For Crowning Block, In Sawn Wood, E=25 Mm, 4 Uses. Af_01/2024, Lot 1 - Block Frame Using 8 Mm Ca-50 Steel - Assembly. Af_01/2024, Lot 1 - Concreting Of Crowning Block Or Baldrame Beam, Fck 30 Mpa, Using A Pump - Laying, Thinning And Finishing. Af_01/2024, Assembly And Disassembly Of Formwork For Baldrame Beam, Lot 1 - Insulated Footing Frame, Baldrame Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, Baldrame Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, Lot 1 - Block Frame, Insulated Footing, Baldrame Beam And Running Footing Using 12.5 Mm Ca-50 Steel - Assembly. Af_01/2024, Lot 1 - Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, Lot 1 - Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Right Foot, Made Of Resin Plywood Sheet, 4 Uses. - Af_09/2020, Lot 1 - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 12.5 Mm Ca-50 Steel - Assembly. Af_06/2022, Lot 1 - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, Lot 1 - Concreting Of Pillars, Fck = 25 Mpa, Densification And Finishing. Af_02/2022 - Ps, Lot 1 - Manufacture Of Formwork For Beams, With Sawn Wood, E = 25 Mm. Af_09/2020, Lot 1 - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 Steel Of 10, Lot 1 - Concreting Of Beams And Slabs, Fck=25 Mpa, For Precast Slabs Using A Pump - Laying, Thinning And Finishing. Af_02/2022_Ps, Lot 1 - Unidirectional Precast Slab, Double Supported, For Lining, Ceramic Filling, Conventional Beam, Total Slab Height (Filling+Cover) = (8+3). Af_11/2020 - _Pa, Lot 1 - Fence Masonry Of Horizontally Drilled Ceramic Blocks Of 14X9x19 Cm (Thickness 14 Cm, Laying Block) And Laying Mortar With Preparation In Concrete Mixer - Af_12/2021, Lot 1 - Strut Molded In Place In Concrete, Thickness *15* Cm. Af_03/2024, Lot 1 - In-Situ Cast In Concrete Girder, E = 17 Mm. Af_12/2015, Lot 1 - Manufacture Of Formwork For Pillars And Similar Structures, E = 17 Mm. Af_09/2020, Lot 1 - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Uses
|
