|
Lot 62611 - Steel Bookcase With 6 Shelves, Steel Bookcase, Shelves In 18 Mm Mdp And Columns In 16 Sheet Metal (Minimum Thickness 1.5 Mm), Minimum Shelf Adjustment Height 25 Mm, Finished By Chemical Plate Treatment System (Anti-Ferruginous And Phosphating) With Baths Successive Hot, With Degreaser, Stripper, Phosphating And Passivator, Painting Through Electrostatic System Epoxy Powder Cured In An Oven At At Least 180 º C, With Smooth And Uniform Surfaces, Containing 06 Shelves. The “L” Shaped Columns Must Receive Plastic Shoes At Their Ends In Contact With The Ground. All Structure In Light Gray. Maximum Tolerance For Variation In Dimensional Measurements (+ Or -) 3Mm., Lot 62611 - File For Hanging Folders With 4 Drawers.File Drawer With 04 Drawers Hanging Folder Measuring 475X500x1370mm. Top: Made Of 25Mm Thick Mdp Wood Produced With Wood Particles Selected Pine And Eucalyptus Wood, Bonded With Thermo-Fixed Synthetic Resin That Consolidates Under The Joint Action Of Heat And Pressure, Covered With Melamine Film, Which, Through The Effect Of Hot Pressing, Makes The Film Fuse With The Agglomerated Wood, Forming A Single And Inseparable Body, Finished With 2Mm Thick Pvc Edge Strip And 2Mm Radius At All Ends.Body: Back, Bases And Sides Made Of 18Mm Thick Mdp Wood Respectively Produced With Particles Of Selected Pine And Eucalyptus Wood, Finished In 1Mm Thick Pvc Edge Tape At All Ends. Fixing: The Entire Fixing System Is Made Using Metal Bushings, Fixing Systems Of Any Other Form That Cause Direct Friction On The Wooden Parts Will Not Be Accepted, Enabling Assembly And Disassembly Numerous Times Without Causing Damage To Them. Drawers: Drawer Fronts Made Of 18Mm Thick Mdp Wood And Produced With Wood Particles Selected From Pine And Eucalyptus, Finished With 1Mm Thick Pvc Edge Tape On All Ends. Telescopic Rail Supporting A Minimum Of 30Kg. Lock: Retractable Fixed To The Front With Simultaneous Locking Of The Drawers Pe, Lot 62611 - Tall Cabinet With 02 Doors Measuring 800X450x1600mm. Top: Made From 25Mm Thick Mdp Wood, Produced With Selected Wood Particles From Pine And Eucalyptus, Covered With Textured Melamine Film, Making The Film Fuse To The Wood, Finished With 2Mm Thick Pvc Edge Tape On All Ends. Body: Back, Bases And Sides Made From 18Mm Thick Mdp Wood, Produced With Selected Wood Particles From Pine And Eucalyptus, Finished With 1Mm Thick Pvc Edge Tape On All Ends. The Internal Sides Have Holes Spaced Approximately 32Mm Apart That Allows The User To Adjust The Shelves And Other Accessories. Fastening System Consisting Of A Rotating Drum Made Of Zamak Or Similar Stamped With Quick Mounting Screw M6 Adjustable Shelves: Made From 25Mm Thick Mdp Wood Produced With Selected Wood Particles From Pine And Eucalyptus, Forming A Single And Inseparable Body, Finished With 1Mm Thick Pvc Edge Tape At All Ends. The Shelves Must
|
