|
Tender for Setting Up Of Center For Early Innovation At 40 Schools Across The 8 Northern Districts (Ernakulam To Kasarakode) Kerala- 1 Surface Treatment and Painting Works 2 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 3 13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer 4 13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work 5 13.61.1. Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work 6 Graphics and Branding Installation 7 Design , printing and installation of graphics on wall with Digitally reproduced art work Print on 3M IJ 16-20 with foam board and installed over an existing surface of partition / panelling as per details. 8 Wiring, Conduits and Accessories 9 Item code 1.7.2 Wiring for circuit/ sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 10 1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch 11 1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet 12 1.28.2 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 3 Module 13 90.10.1.3 Supply & Fixing the following types/sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required(RoHS compliant ) 3 module moulded plastic box on surface 14 Supply and installation of PVC casing and capping of the following sizes including supply of fixing materials, interconnecting,clamps,screws etc. complete as required and as directed by Engineer in Charge. Specification : 20mm wide (inner) 15 Item code: 1.14.1 Wiring for circuit/sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit as required. Specification : 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire 16 Distribution and Protection Equipment 17 2.3.3. Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator 12 way, Double door 18 2.14.1. Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Specification : 25 amps 19 2.10.1. Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 20 2.10.3. Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole 21 Data and Networking Infrastructure 22 Supply of Wireless Ceiling Mount Access Point, Support PoE 802.3af/at and Direct Current, Easily Mount to Wall or Ceiling including power adapter. Model : TP Link Archer or equivalent 23 Supply and installation of Cat 6 RJ 45 Connectors with boot. 24 Item code:1.53.1 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required Item code : 1.53.1 : 1 run cable 25 Item code: 1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. Item code: 1.21.1 : Specification 20mm 26 Furniture and Modular Fixtures 27 Fabrication supply and installation of wall side working table of size 3.00 L x 0.60 W x 0.75 H m. Table top : prelaminated particle board/MDF. Leg : MS powder coated leg and MS powder coated edge beams. 28 Fabrication supply and installation of wall side working table of size 1.20 L x 0.60 W x 0.75 H m. Table top : prelaminated particle board/MDF. Leg : MS powder coated leg and MS powder coated edge beams. 29 Fabrication supply and installation of wall side working table of size 1.20 L x 1.20 W x 0.75 H m. Table top : prelaminated particle board / MDF. Leg : MS powder coated leg and MS powder coated edge beams. 30 Workstation Chairs: Supplying and placing Mid back height adjustable chair with fixed armrest. Seat upholstered with PU Foam & back with mesh as per design intent.Including all cost and conveyance of materials, labour etc 31 Wooden stool chair : Supply and placing round wooden stool chair of 50 cm dia seating with metal powder coated/ wooden leg. 32 Fabrication supply and installation metal rack of size 0.90m L x 0.45m W x 1.80m H with slotted angle frames and metal sheets 33 Dampness Treatment 34 OD:Cleaning and grading the existing wall surface to remove dust, dirt, efflorescence, and loosely adhered particles using wire brush/manual methods. Carefully chipping of damaged, discolored, and damp wall portions using hammer and chisel (Owner’s Scope). Drilling 12 mm (½") dia. holes at 90 mm (3½") c/c spacing along the lowest mortar line between first and second course of bricks from floor level using hammer drill, followed by vacuum cleaning of holes. Fixing PVC pipes for injection and gravity injecting approved Xylene Siloxane-based waterproofing chemicals into the holes in two rounds to create an effective damp-proof course. After chemical injection, sealing of holes with cementitious mortar. Applying one coat of two-component acrylic polymer-modified flexible cementitious waterproofing coating suitable for negative water pressure (e.g., Brushbond RFX or equivalent). Subsequently, plastering the treated surface using polymer-based, fiber-reinforced repair mortar such as Rendroc SP40 of M/s Fosroc Chemicals or equivalent approved brand. Finishing the work by applying one coat of water-based epoxy coating for final protection and durability as per manufacturer’s specification and as directed by the Engineer-in-Charge. 35 BBC Micro:Bit V2.21 Go Kit or equivalent
|
