Bids Are Invited For Hiring A Specialized Company To Rent, Assemble And Disassemble An Inflatable Circuit An ... in Brazil

Work Detail

Provision Of Services For The Rental, Assembly And Disassembly Of An Inflatable Circuit, For The 6Th To 8Th Of February, During The “Festa Das Nações 2026” Event, With The Following Minimum Characteristics: Module 1: Medium Toboggan (Descent And Ascent On Both Sides). In This Module, The Slide Ramp And The Stairs Are The Same On Both Sides With A Soft Stop System With A Height Of 3.50 Mt, The End Of The Ramp Begins A Slope Opposite To That Of The Descent. Side Walls According To Abnt Standards. With Reinforcement At The Ends, Perforated For Mooring At The Internal Bottom And Internal Ramp Of The Toboggan. 1.0 Hp 220 V Blower Motor, Can Be Changed To 110 V, With Circuit Breaker And Power Cable With 2M Plug. Two-Phase Motor With Rotomoldable Plastic Protection. Conjugated Access Ladder Made In Mp 1400, With Welded And Sewn Steps For Greater Reinforcement. Approximate Weight: 130 Kg. Modules 2 And 3: Ball Obstacles. This Module Contains 4 Obstacles Type Giant Balls, Colorful And Centralized, Which Can Be Surrounded From The Side, Between The Walls Of The Inflatable. Side Walls (Front, Side1, Side2 And Back) According To Abnt Standards. With Reinforcement At The Ends, Perforated For Lashing At The Bottom. 1.0 Hp 220 V Blower Motor, With Circuit Breaker And Power Cord With 2M Plug. Two-Phase Motor With Rotomoldable Plastic Protection. Approximate Weight: 170 Kg. Module 4: Large Slide With Climbing Height 5.50Mt. In This Module, You Begin Climbing The Toboggan, With Support Points For Climbing, Made Of Resistant, Reinforced Material, With The Inclined Ramp, To The Top Of The Toboggan. On The Opposite Side, On The Way Down, A Sliding Ramp, With A Gentle Stop, At The End Of The Ramp Begins A Slope Opposite To That Of The Descent. Side Walls (Front, With Circuit Breaker And Power Cable With 2M Plug.

Contact Information