|
Dining Set With Injected Top For 12 Placesspecification: Table With A Single Seamless Top Measuring 2150Mm Long By 948Mm Wide, With A Thickness Of 8Mm And A Seamless Edge Measuring 50Mm, Made From Virgin Abs High-Impact Thermoplastic Resin, Free From Mineral Fillers. Manufacturers Logo Injected On The Surface Of The Top. Top Fixed To The Structure Using Screws. Top To Floor Height Of 590Mm. Table Top Base Formed By Two Square Tubes Measuring 25X25mm Positioned Under The Top, Manufactured Using The Mechanical Forming Process By Folding, Covering The Entire Perimeter Of The Table And Resulting In Two Welding Points Joining The Ends And A Horizontal Support Bar Made Of 25X25mm Tube, 4 Columns With 2” Inch Tube For The Feet, With Injected Pp Plastic Resin (Polypropylene) Tips. Chair – Stackable Model Chair With Seat And Back In Pp Plastic Resin (Polypropylene). (Childrens), Yellow, Composed Of A Table And A Chair. The Table Has A Rectangular Top Injected In Virgin Abs, Microtextured, With A 0.6 Mm Recess And Polished Edges. With A Capacity Of 14 Liters, Injected In Black Polypropylene. The Table Structure Is Made Up Of 20X20 Mm Steel Tubes, With “U” Shaped Feet For Stacking And Polypropylene Tips. Made Of Injected Virgin Plastic Resin, Fixed By Screws, With Carrying Handle And Injected Mark. The Seat Measures 340X340 Mm, The Backrest Is 340X280 Mm, With A Built-In 16X30 Mm Steel Tube. The Base Is Made With 20X20 Mm Steel Tubes And Reinforcement With 5/8” Tubes. Structure Treated And Painted Like A Table. The Set Must Present A Certificate In Accordance With Norm Nbr 14006/2008, Inmetro Ordinance 105/2012, And An Antiviral Activity Report In Accordance With Iso 21702:2019 For Sars-Cov-2, With A Logarithm ≥2., Trapezoid Set In High-Impact Plastic Resinspecification: Childrens Trapezoid Set In High-Impact Plastic Resin, Composed Of 6 Trapezoid Tables, 6 Chairs And 1 Hexagonal Central Table, Designed For Collective Use. The Tables Have A Virgin Abs Top Measuring 660X240x440 Mm With A Depth Of 390 Mm, Reinforced By Ribs, Fixed To The Metal Structure In Industrial Steel Tubes With Arched Feet And Non-Slip Polypropylene Shoes. The Chair Has A Seat And Back In Virgin Polypropylene Copolymer, With Round Edges, Carrying Handle And Injected Mark, Measuring 340 Reinforced Plastic, With Protective Tips. The Central Table Has A Hexagonal Top Injected In Beige Resin With 13 Cavities (1 Central, 6 For Materials And 6 Cup Holders), Each Side Measuring 235 Mm, Structure With 3 7/8 Steel Feet. The Entire Metallic Structure Is Treated With Chemical Baths, Mig Welding And Epoxy Powder Painting. The Set Must Present Reports In Accordance With: Nbr 8095/15 (1400 H In A Saturated Humid Atmosphere), Lead Content In Accordance With Federal Law
|
