|
Tender For Provision Of Deficient Work Services In Mrsam Complex At Af Station Naliya - 1 Lump sum price worked out by the tenderer for“BUILDING /STRUCTURE WORKS as listed in Schedule ‘A’ Part - I 2 Lump sum price worked out by the tenderer for“INTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part - II 3 Lump sum price worked out by the tenderer for“EXTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part-III 4 Lump sum price worked out by the tenderer for“ ROAD WORKS as listed in Schedule ‘A’ Part-IV 5 Sch A Part-V ( Miscellaneous Items) 6 Supply and fix Nylon net of bird proofing for shed / storage accn/ soft pen and possess following properties-a) The brust strength up to 44 poundsb) Shall meet ISO 1806 protocols.c) 3/4 (Three Fourth inch), Messs netting.d) Thickness 0.071 thick(6 SDtrands each 0.012 Thick).e) Quality control- filments: are twisted and knotted pressure stretched and tughtened.f) break strength: 52 lbs/2316 kgs per strand.g) chemical properties-polythylene, a parffin hydrocarbon, is chemically insert, flame retardant and highly resistant to most chemicals at temperatures.h) High resistant to acids and alkaloids at all concentrations.i)High temperature-210-239 Degree, F/100-115 Degree.j)Low temperature-139 to 166 degree, F/-95 to 110 DegreeC. Including all fitting such as rolling pully, Iron strips, rope for cotrolling net, nails etc. all as specified and directed by engineer in charge. 7 Material and labour for cuttingthe existing road hard standing surface to a depth of 70mm and 50mm width and getting out for laying under ground pipe including returning filling in watering well ramming in layers not exceeding 25cm in soil and filling the top 15 cm thick with PCC 1:2:4 type B1 using 20 mm graded stone aggregate and finishing even and smooth without extra cement . 8 Supply, installing, testing and commissioning, in repair factory made and tested LTPanel, outdoor type floor mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber duly insulated. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and 50x50x6mm thick angle iron base frame work,powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside,both side openingtype, with aprons for cable entry,with double door and locking arrangement and including earth work, disconnecting old connections and taking out oldpanel and reconnecting new panel etc. The panel consisting of the following:- (a)Aluminumbus barfour strips300 Amps ,415 volts, fixed horizontally, duly insulatedwithheat shrinkable sleeves in colour code - 01 Set.(b)MCCB 04 Pole, 63 Amps with breaking capacity 16 KA - 01 No (Incoming) (c)MCCB,04 Pole,40 Amps with breaking capacity 16 KA - 02 Nos (d)Digital Volt meter 0-500 volt with coil and selector switch - 1 No.(e) Digital ammeter 0-500Amps with CT coil and selector switch - 01 No(g) Indication lamps R,Y,BLEDtype– 1 set of three (j) Internal wiring with suitable size of PVC insulated stranded copper conductor cable duly crimped with copper lugs & ferruled and aluminumstrips for MCCBs.(k) Platform for the panel with PCC 1:4:8 type D-2 with 40mm graded crushed stone , 15 cm thick in foundation, cemented block/brick work in CM 1:6 with sub class `B, old sizebricks, rendering 15mm thick in CM 1:6 on exposed surfaces and 100mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 30cmaboveand 15 Cm below the groundlevel.(Note :- Main Gd Room-Compartmentalized Panel Dimensions (1120mmx1695mmx450mm)(W*H*D)
|
