Bids Are Invited For Acquisition Of Equipment For Outdoor Gyms, In Order To Meet The Needs Of The Municipal ... in Brazil

Work Detail

Stretcher With Three Heights, Made Of Carbon Steel Tube, Painted In The Electrostatic Process -Gymnastics Equipment For Outdoor Gym / Senior Citizens Gym – Ati; Composition: Manufactured With Carbon Steel Tubes Measuring At Least 4” × 3 Mm; 3.½” × 3.75 Mm; 2” × 2 Mm; 1” × 1.50 Mm; ¾ × 1.20 Mm. Flat Bars At Minimum 3/16” × 1.¼”. Carbon Steel Sheets Of At Least 4.75 Mm For Reinforcing The Structure And 3 Mm For Fixing The Steering Wheel Assembly. Use Solid Pins, Phosphate-Based Surface Treatment; Colorful Thermo-Hardening Polyester Resin Protective Film With Electrostatic Powder Deposition System, Mig Welding. Anchor With Flange Of At Least 230 Mm × 3/16”, Laser Cut With Zinc-Plated Fixing Screws Of At Least ?” × 1.¼” And Zinc Plated Washer Of At Least ?”, Drawn Solid Iron Rods Of At Least ?”. Internal Built-In Plug In Injected Plastic Of At Least 3.½” With Spherical Finish Following The External Dimension Of The Tube, Zinc Plated Screws, Washers And Fastening Nuts. High Fixation Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions And Use And Manufacturer Data., Gym Equipment - Double Abdominal – Galvanized; Composition: Manufactured With Carbon Steel Tubes Measuring At Least 3’ ½ X 3.75 Mm; 2’ 1’ ½ X 1.50 Mm; 1’ X 1.50 Mm. Oblong Of At Least 20 Mm X 48 Mm X.1, 20 Mm. Carbon Steel Plates With A Minimum Of 4.75Mm. Flat Bar At Least 2’ ½ X ¼’. Anchor With Flange Of At Least 230 Mm X 3/16, Laser Cut With Zinc-Plated Fixing Screws Of At Least 5/8 With Spherical Finish., Fixed Bar (Triple Lifting Bar); Composition: Made With Carbon Steel Tubes Of At Least 4 X 3 Mm; Minimum 230 Mm X 3/16, Laser Cut With Zinc-Plated Fixing Screws Of At Least 5/8 Zinc Plated Fixing Screws And Nuts. Built-In Internal Plug In Injected Plastic Measuring At Least 3’ ½ With Spherical Finish. Phosphate-Based Surface Treatment Is Used; Colored Thermo-Hardenable Polyester Resin Protective Film With Electrostatic Powder Deposition System, Mig Welding, Injected Plastic And/Or Rubberized Finishes. Tubes With Reduced Diameter For Hand Grip, Eliminating Splices. 3M High Fixation Destructive Reflective Sticker With Identification Of Muscle Groups, Instructions For Use And Manufacturer Data., Gymnastics Equipment - Simple Horseback Riding; Composition: Manufactured With Carbon Steel Tubes Measuring At Least 2.½” × 2 Mm; 2” × 2 Mm; 1.½” × 3 Mm; 1.½” × 1.50 Mm; 1” × 1.50 Mm. Flat Bar Of Minimum 2.½” × ¼”; 3/16” × 1.¼”. Drawn Carbon Steel Tube 2” × 5.50 Mm Schedule 80 (60.30 Mm × 49.22 Mm). Carbon Steel Plates Of At Least 4.75 Mm For The Equipment Fixing Point And 2 Mm For The Printed Bench With Rounded Edges. Solid Pins Are Used, All Bearings (Double Bearings), Round Flexible Rubber Stops (53 Mm × 30 Mm), Mig Welding, Parabolt Anchor Of At Least ?” × 2.½”, Acetal Bushing, Washers And Locknuts. Built-In Internal Plug In Injected Plastic Of At Least 2.½” And 2” With End

Contact Information